Effects of dual biofuel approach for total elimination of diesel on injection system by reciprocatory friction monitor

2017 ◽  
Vol 232 (9) ◽  
pp. 1068-1076 ◽  
Author(s):  
Paramvir Singh ◽  
Varun Goel ◽  
SR Chauhan
Keyword(s):  
Diesel Engine ◽  
Fossil Fuels ◽  
Operating Conditions ◽  
Injection System ◽  
Effect Of Temperature ◽  
Compression Ignition ◽  
Oil Blends ◽  
Compression Ignition Engines ◽  
The Impact ◽  
Total Elimination

Biodiesel is a promising fuel which shows potential and gradually received attention as a best alternate feedstock for diesel engine. Previous investigations have shown that use of double biofuels in a diesel engine can be a promising aspect for complete elimination of diesel from compression ignition engines which will decrease our dependency on fossil fuels. The tribological performance of injection system is primarily based on the lubricity characteristics of the fuel. So, it is imperative to a more diversified research about the impact of using double biofuels in engine. In the present investigation, different biodiesel-oil blends were investigated using the ASTM D6079 by the reciprocatory friction monitor. The effect of temperature variation on lubricity characteristics was also studied. The biodiesel-oil blends shows improvement in results as compared to diesel. Biodiesel is prone to oxidation due to availability of unsaturation in their moieties. The effects of oxidation on lubricity characteristics were also studied. It was also found that the operating conditions collectively affected the lubricity characteristics of tested feedstocks.

scholarly journals Impact on Reduction of Pollutant Emissions from Passenger Cars when Replacing Euro 4 with Euro 6d Diesel Engines Considering the Altitude Influence

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1278 ◽  
Author(s):  
José Serrano ◽  
Pedro Piqueras ◽  
Ali Abbad ◽  
Roberto Tabet ◽  
Stefan Bender ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Pollutant Emissions ◽  
Emissions Reduction ◽  
Compression Ignition ◽  
Test Cycle ◽  
Short Term ◽  
Passenger Cars ◽  
Compression Ignition Engines ◽  
Subsequent Discussion ◽  
The Impact

The impact of Euro 4 compression ignition engines over the air quality in Europe has been analyzed in this work by comparing them with Euro 6d emissions regulation. The Euro 6d diesel engine has been chosen as the preferred replacement according to its advantages in global warming potential (GWP) emissions, like methane hydrocarbons (MHC) and CO2, with respect to Euro 6d petrol-based powertrains. The motivation for this study is that the effects of the emissions reduction policies, as the implementation of the regulation Euro 6d, are necessarily limited due to the great number of passenger cars still in circulation that were homologated under Euro 4 or older standards. To address the impact of the old vehicle pool, a Worldwide harmonized Light-vehicles Test Cycle (WLTC) has been used to analyze the performance and pollutant emissions of a Euro 4 diesel engine in altitude conditions. This driving cycle and engine are considered as a baseline for the subsequent discussion, where the altitude plays a key role because of the European geography. It forces passenger cars to drive over sea level during a significant number of trips. Thus, an analysis of how significant would be the impact of energy policies promoting the substitution of the pre-Euro 5 diesel fleet (>10 years old) by modern Euro 6d engines in the short term on the pollutants and GWP emissions reduction is presented.

ETHANOL–BIODIESEL–DIESEL BLENDS AS A DIESEL EXTENDER OPTION ON COMPRESSION IGNITION ENGINES

Transport ◽  
2011 ◽  
Vol 26 (3) ◽  
pp. 303-309 ◽  
Author(s):  
Máté Zöldy
Keyword(s):  
Fossil Fuels ◽  
Cetane Number ◽  
Oil Industry ◽  
Diesel Oil ◽  
Compression Ignition ◽  
Compression Ignition Engines ◽  
Fuel Demand ◽  
Oil Mixtures ◽  
Increasing Demand ◽  
Natural Reserves

Increasing fuel demand, decreasing natural reserves and environmental consciousness have together led to testing and implementing new fuels and blending components of compression ignition engines. Biofuels are very commonly added to fossil fuels, mostly ethanol to gasoline and FAME to diesel. Harmonizing their properties with engines is a great challenge for automotive and oil industry. Increasing demand for diesel oil in Europe raised the question about the possibility of increasing the amount of bio extenders. There were and certainly there are a number of experiments aimed at substituting or blending diesel with other fuels. One group of such fuels makes bioethanol– biodiesel–diesel oil mixtures. The paper proposes a global overview on literature and presents the obtained results. The article explores the possibility of using bioethanol–biodiesel–diesel oil mixtures in vehicles and agricultural compression ignition engines. The main aspect of researches was to find blends substitutable for compression ignition engines. Investigations were made to determine the maximum volume of a renewable part thus reaching the same or similar power output with lowering emissions. The received results were used for environmental and economical investigations. The valorisation of the results shows that bioethanol–biodiesel–diesel blends fulfil the cetane number, viscosity and lubricity requirements for standard diesel. Practical measurements and engine tests show that the utilization of a new fuel decreases emissions from the engine. The results of agricultural feedstock calculation indicate that in Hungary the biofuel part of the investigated fuels can be produced from an overflow.

Preparation of Jatropha Biodiesel Using Hydrotalcite Catalyst and its Performance on Diesel Engine

2011 ◽  
Vol 110-116 ◽  
pp. 1368-1373 ◽  
Author(s):  
Amar P. Pandhare ◽  
S. G. Wagholikar ◽  
R. B. Jadhav Sachin Musale ◽  
A. S. Padalkar
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Specific Energy Consumption ◽  
Exhaust Emissions ◽  
Effect Of Temperature ◽  
Compression Ignition ◽  
Performance Parameters ◽  
Jatropha Oil ◽  
Compression Ignition Engine ◽  
Ci Engines

The heterogeneous catalyst are environment friendly and render the process simplified. A wide variety of solid bases have been examined for this process. The present work reports the use of hydrotalcite catalyst for the synthesis of Biodiesel from jatropha oil. An experimental investigation has been carried out to analyze the performance and emission characteristics of a compression ignition engine fuelled with Jatropha oil and its blends (10%, 20%, 40%, 50%, and 60 % ) with mineral diesel. The effect of temperature on the viscosity of Jatropha oil has also been investigated. A series of engine tests, have been conducted using each of the above fuel blends for comparative performance evaluation. The performance parameters evaluated include thermal efficiency, brake specific fuel consumption (BSFC), brake specific energy consumption (BSEC), and exhaust gas temperature whereas exhaust emissions include mass emissions of CO, HC, NO. These parameters were evaluated in a single cylinder compression ignition diesel engine. The results of the experiment in each case were compared with baseline data of mineral diesel. Significant improvements have been observed in the performance parameters of the engine as well as exhaust emissions. The gaseous emissions of oxide of nitrogen from all blends are lower than mineral diesel at all engine loads. Jatropha oil blends with diesel (up to 50% v/v) can replace diesel for operating the CI engines giving lower emissions and improved engine performance. More over results indicated that B20 have closer performance to diesel and B100 have lower brake thermal efficiency mainly due to its high viscosity compared to diesel.

scholarly journals Eucalyptus Biodiesel as an Alternative to Diesel Fuel: Preparation and Tests on DI Diesel Engine

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Lyes Tarabet ◽  
Khaled Loubar ◽  
Mohand Said Lounici ◽  
Samir Hanchi ◽  
Mohand Tazerout
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Pressure Rise ◽  
Operating Conditions ◽  
Second Phase ◽  
Oil Consumption ◽  
Unburned Hydrocarbon ◽  
Engine Combustion ◽  
Di Diesel Engine

Nowadays, the increasing oil consumption throughout the world induces crucial economical, security, and environmental problems. As a result, intensive researches are undertaken to find appropriate substitution to fossil fuels. In view of the large amount of eucalyptus trees present in arid areas, we focus in this study on the investigation of using eucalyptus biodiesel as fuel in diesel engine. Eucalyptus oil is converted by transesterification into biodiesel. Eucalyptus biodiesel characterization shows that the physicochemical properties are comparable to those of diesel fuel. In the second phase, a single cylinder air-cooled, DI diesel engine was used to test neat eucalyptus biodiesel and its blends with diesel fuel in various ratios (75, 50, and 25 by v%) at several engine loads. The engine combustion parameters such as peak pressure, rate of pressure rise, and heat release rate are determined. Performances and exhaust emissions are also evaluated at all operating conditions. Results show that neat eucalyptus biodiesel and its blends present significant improvements of carbon monoxide, unburned hydrocarbon, and particulates emissions especially at high loads with equivalent performances to those of diesel fuel. However, the NOx emissions are slightly increased when the biodiesel content is increased in the blend.

Predicted Qualitative Effects of Alternate Liquid Fuels on Heavy-Duty Compression-Ignition Engines

2009 ◽  
Author(s):  
Gong Chen
Keyword(s):  
Fuel Injection ◽  
Cetane Number ◽  
Fuel Properties ◽  
Liquid Fuels ◽  
Compression Ignition ◽  
Heavy Duty ◽  
Compression Ignition Engine ◽  
End Effects ◽  
Compression Ignition Engines ◽  
The Impact

It is always desirable for a heavy-duty compression-ignition engine, such as a diesel engine, to possess a capability of using alternate liquid fuels without significant hardware modification to the engine baseline. Because fuel properties vary between various types of liquid fuels, it is important to understand the impact and effects of the fuel properties on engine operating and output parameters. This paper intends and attempts to achieve that understanding and to predict the qualitative effects by studying analytically and qualitatively how a heavy-duty compression-ignition engine would respond to the variation of fuel properties. The fuel properties considered in this paper mainly include the fuel density, compressibility, heating value, viscosity, cetane number, and distillation temperature range. The qualitative direct and end effects of the fuel properties on engine bulk fuel injection, in-cylinder combustion, and outputs are analyzed and predicted. Understanding these effects can be useful in analyzing and designing a compression-ignition engine for using alternate liquid fuels.

Comparison of Performance and Emission Characteristic of Tamanu, Mahua and Pongamia Biodiesel in a Di Diesel Engine

2013 ◽  
Vol 768 ◽  
pp. 218-225 ◽  
Author(s):  
M. Parthasarathy ◽  
J. Isaac Joshua Ramesh Lalvani ◽  
B. Parthiban ◽  
K. Annamalai
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Alternative Fuels ◽  
Fossil Fuels ◽  
Operating Conditions ◽  
Emission Characteristic ◽  
Performance And Emission ◽  
Di Diesel Engine ◽  
Alternative Sources ◽  
Petroleum Reserves

Random extraction and consumption of fossil fuels have leads to a reduction in petroleum reserves. As for as developing countries like India is connected the need to search for alternative fuels is most urgent as India is heavily dependent upon the import of petroleum to meet its demands for automotive and power sectors. This has inspired curiously in alternative sources for petroleum based fuels. An alternative fuel must be economically competitive and environmentally acceptable. India has great potential for production of biofuels like Biodiesel from vegetable seeds. In the quest to find an alternative to the existing diesel and petrol fuels various Biodiesel and alcohol has been tried and tested in the Internal Compression engine. In this direction, an attempt has been made to investigate the performance and emission characteristic of Biodiesels and compare it with diesel. The Biodiesels considered are Tamanu, Mahua and Pongamia were tested with four stroke diesel engine. A drastic improvement in reduction of Hydrocarbon (HC) and Carbon monoxide (CO) were found for Biodiesels at high engine loads. Smoke and Nitrogen oxides (NOx) were slightly higher for Biodiesels. Biodiesels exposed similar combustion stages to diesel fuel. Therefore use of transesterified vegetable oils can be partially substituted for the diesel fuel at most operating conditions in term of the performance parameters and emissions without any engine modification.

Impact of Intake Induced Swirl on Combustion and Emissions on a Single Cylinder Diesel Engine

2016 ◽  
Author(s):  
Eduardo Barrientos ◽  
Ivan Bortel ◽  
Michal Takats ◽  
Jiri Vavra
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Operating Conditions ◽  
Common Rail ◽  
Injection System ◽  
Nox Emissions ◽  
Cylinder Pressure ◽  
Swirl Ratio ◽  
Single Cylinder ◽  
Optimal Values

Engine induced swirl improves mixing of fuel and air and at optimal values accelerates burn, improves the combustion stability and can decrease particulate matter (PM). However, swirl increases convective heat loss and cylinder charge loss and could increase nitrogen oxides (NOx) emissions. High intensity of swirl could impede flame development and increases emissions of total hydrocarbons (THC) and carbon monoxide (CO). Therefore, careful and smart selection of optimal swirl values is paramount in order to obtain beneficial impact on combustion and emissions performance. This study is conducted on a 0.5L single cylinder research engine with common rail (CR) diesel injection system, with parameters corresponding to modern engines of passenger cars. The engine has three separate ports in the cylinder head. The change of swirl ratio is defined by closing appropriate ports. There are three levels of swirl ratio under study — 1.7, 2.9 and 4.5, corresponding to low, medium and high swirl levels respectively. This study highlights the influence of intake induced swirl on combustion parameters and emissions. Assessed combustion parameters are, among others, heat release rate, cylinder pressure rise and indicated mean effective pressure. Assessed emissions are standard gaseous emissions and smoke, with emphasis on PM emissions. An engine speed of 1500 rpm was selected, which well represents common driving conditions of this engine size. Various common rail pressures are used at ambient inlet manifold pressure (without boost pressure) and at 1 bar boosted pressure mode. It is found that when the swirl level is increased, the faster heat release during the premixed combustion and during early diffusion-controlled combustion causes a quick increase in both in-cylinder pressure and temperature, thus promoting the formation of NOx. However, since swirl enhances mixing and potentially produces a leaning effect, PM formation is reduced in general. However, maximum peak temperature is lower for high swirl ratio and boosted modes due to the increase of heat transfer into cylinder walls. Furthermore, it is necessary to find optimal values of common rail pressures and swirl ratio. Too much mixing allows increase on PM, THC and CO emissions without decrease on NOx emissions in general. Common rail injection system provides enough energy to achieve good mixing during all the injection time in the cases of supercharged modes and high common rail pressure modes. Positive influence of swirl ratio is found at lower boost pressures, lower revolution levels and at lower engine loads. The results obtained here help providing a better understanding on the swirl effects on diesel engine combustion and exhaust emissions over a range of engine operating conditions, with the ultimate goal of finding optimal values of swirl operation.

Factors Affecting Performance of Dual Fuel Compression Ignition Engines

2013 ◽  
Vol 388 ◽  
pp. 217-222
Author(s):  
Mohamed Mustafa Ali ◽  
Sabir Mohamed Salih
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection System ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Factors Affecting

Compression Ignition Diesel Engine use Diesel as conventional fuel. This has proven to be the most economical source of prime mover in medium and heavy duty loads for both stationary and mobile applications. Performance enhancements have been implemented to optimize fuel consumption and increase thermal efficiency as well as lowering exhaust emissions on these engines. Recently dual fueling of Diesel engines has been found one of the means to achieve these goals. Different types of fuels are tried to displace some of the diesel fuel consumption. This study is made to identify the most favorable conditions for dual fuel mode of operation using Diesel as main fuel and Gasoline as a combustion improver. A single cylinder naturally aspirated air cooled 0.4 liter direct injection diesel engine is used. Diesel is injected by the normal fuel injection system, while Gasoline is carbureted with air using a simple single jet carburetor mounted at the air intake. The engine has been operated at constant speed of 3000 rpm and the load was varied. Different Gasoline to air mixture strengths investigated, and diesel injection timing is also varied. The optimum setting of the engine has been defined which increased the thermal efficiency, reduced the NOx % and HC%.

Effects of Exhaust Gas Recirculation on Particulate Morphology from a Diesel Engine

2013 ◽  
Vol 664 ◽  
pp. 926-930
Author(s):  
Wei Zhang ◽  
Xiao Dong Wang ◽  
Rui Sun ◽  
Jian Wei Sun ◽  
Wei Han
Keyword(s):  
Particle Size ◽  
Diesel Engine ◽  
Primary Particle ◽  
Morphological Characteristics ◽  
Exhaust Gas Recirculation ◽  
Operating Conditions ◽  
Injection System ◽  
Exhaust Gas ◽  
Aggregate Particle ◽  
Gas Recirculation

The effects of EGR operating mode on particulate morphology were investigated for a 5.79-liter diesel engine which was equipped with a turbocharged and inter-cooled air induction system, a common-rail direct fuel injection system, and an EGR system. Morphological characteristics, such as primary particle size, number concentration and aggregate particle size were investigated by a transmission electron microscope (TEM) analysis and a electrical low pressure impactor (ELPI) under engine operating conditions of 0.41 in fuel/air ratio at different exhaust gas recirculation (EGR) rate from 0～35%. The experimental results indicated that primary particle were in the range of 17.05nm～18.34nm, which increased with increased EGR rate. As EGR rate increased, aggregate particle size were measured in a narrow range from 120nm to 170nm.

Sign in / Sign up

Export Citation Format

Share Document