scholarly journals Modeling esophageal protection from radiofrequency ablation via a cooling device: an analysis of the effects of ablation power and heart wall dimensions

2020 ◽  
Vol 19 (1) ◽  
Author(s):  
Marcela Mercado ◽  
Lisa Leung ◽  
Mark Gallagher ◽  
Shailee Shah ◽  
Erik Kulstad
Keyword(s):  
Atrial Fibrillation ◽  
Water Temperature ◽  
Clinical Data ◽  
Thermal Injury ◽  
Cooling Water ◽  
Esophageal Injury ◽  
Cooling Device ◽  
Lesion Depth ◽  
Cooling Water Temperature ◽  
Heart Wall

Abstract Background Esophageal thermal injury can occur after radiofrequency (RF) ablation in the left atrium to treat atrial fibrillation. Existing methods to prevent esophageal injury have various limitations in deployment and uncertainty in efficacy. A new esophageal heat transfer device currently available for whole-body cooling or warming may offer an additional option to prevent esophageal injury. We sought to develop a mathematical model of this process to guide further studies and clinical investigations and compare results to real-world clinical data. Results The model predicts that the esophageal cooling device, even with body-temperature water flow (37 °C) provides a reduction in esophageal thermal injury compared to the case of the non-protected esophagus, with a non-linear direct relationship between lesion depth and the cooling water temperature. Ablation power and cooling water temperature have a significant influence on the peak temperature and the esophageal lesion depth, but even at high RF power up to 50 W, over durations up to 20 s, the cooling device can reduce thermal impact on the esophagus. The model concurs with recent clinical data showing an 83% reduction in transmural thermal injury when using typical operating parameters. Conclusions An esophageal cooling device appears effective for esophageal protection during atrial fibrillation, with model output supporting clinical data. Analysis of the impact of ablation power and heart wall dimensions suggests that cooling water temperature can be adjusted for specific ablation parameters to assure the desired myocardial tissue ablation while keeping the esophagus protected.

scholarly journals Reduction of CO2 Emissions in Steelmaking by Means of Utilization of Steel Plant Waste Heat to Stabilize Seasonal Cooling Water Temperature

2021 ◽  
Vol 13 (11) ◽  
pp. 5957
Author(s):  
Tomas Mauder ◽  
Michal Brezina
Keyword(s):  
Continuous Casting ◽  
Water Temperature ◽  
Co2 Emissions ◽  
Waste Heat ◽  
Cooling Water ◽  
Main Idea ◽  
Casting Process ◽  
Spray Cooling ◽  
Steel Plant ◽  
Cooling Water Temperature

Production of overall CO2 emissions has exhibited a significant reduction in almost every industry in the last decades. The steelmaking industry is still one of the most significant producers of CO2 emissions worldwide. The processes and facilities used at steel plants, such as the blast furnace and the electric arc furnace, generate a large amount of waste heat, which can be recovered and meaningfully used. Another way to reduce CO2 emissions is to reduce the number of low-quality steel products which, due to poor final quality, need to be scrapped. Steel product quality is strongly dependent on the continuous casting process where the molten steel is converted into solid semifinished products such as slabs, blooms, or billets. It was observed that the crack formation can be affected by the water cooling temperature used for spray cooling which varies during the year. Therefore, a proper determination of the cooling water temperature can prevent the occurrence of steel defects. The main idea is based on the utilization of the waste heat inside the steel plant for preheating the cooling water used for spray cooling in the Continuous Casting (CC) process in terms of water temperature stabilization. This approach can improve the quality of steel and contribute to the reduction of greenhouse gas emissions. The results show that, in the case of billet casting, a reduction in the cooling water consumption can be also reached. The presented tools for achieving these goals are based on laboratory experiments and on advanced numerical simulations of the casting process.

The regulating effect of cooling water temperature on the axial growth rate of large single crystal diamond under HPHT conditions

2019 ◽  
Vol 522 ◽  
pp. 5-10 ◽  
Author(s):  
Yadong Li ◽  
Fangbiao Wang ◽  
Chunxiao Wang ◽  
Liangchao Chen ◽  
Longsuo Guo ◽  
...  
Keyword(s):  
Growth Rate ◽  
Single Crystal ◽  
Water Temperature ◽  
Cooling Water ◽  
Large Single Crystal ◽  
Cooling Water Temperature ◽  
Single Crystal Diamond ◽  
Axial Growth

Effect of Water Temperature on Spray Cooling Heat Transfer on Hot Steel Plate

2010 ◽  
Author(s):  
Jungho Lee ◽  
Cheong-Hwan Yu ◽  
Sang-Jin Park
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Water Temperature ◽  
Steel Plate ◽  
Cooling Water ◽  
Local Heat ◽  
Spray Cooling ◽  
Transfer Coefficients ◽  
Cooling Water Temperature ◽  
Local Heat Flux

Water spray cooling is an important technology which has been used in a variety of engineering applications for cooling of materials from high-temperature nominally up to 900°C, especially in steelmaking processes and heat treatment in hot metals. The effects of cooling water temperature on spray cooling are significant for hot steel plate cooling applications. The local heat flux measurements are introduced by a novel experimental technique in which test block assemblies with cartridge heaters and thermocouples are used to measure the heat flux distribution on the surface of hot steel plate as a function of heat flux gauge. The spray is produced from a fullcone nozzle and experiments are performed at fixed water impact density of G and fixed nozzle-to-target spacing. The results show that effects of water temperature on forced boiling heat transfer characteristics are presented for five different water temperatures between 5 to 45°C. The local heat flux curves and heat transfer coefficients are also provided to a benchmark data for the actual spray cooling of hot steel plate cooling applications.

scholarly journals Development of condenser mathematical model for research and development of ways to improve its efficiency

2020 ◽  
Vol 18 (4) ◽  
pp. 578-585
Author(s):  
Madina Shavdinova ◽  
Konstantin Aronson ◽  
Nina Borissova
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Water Temperature ◽  
Steam Turbine ◽  
Cooling Water ◽  
Laboratory Research ◽  
Thermal Engineering ◽  
Linear Regression Method ◽  
Cooling Water Temperature ◽  
The Mathematical Model

The condensing unit is one of the most important elements of the steam turbine of a combined heat and power plant. Defects in elements of the condensing unit lead to disturbances in the steam turbine operation, its failures and breakdowns, as well as efficiency losses of the plant. Therefore, the operating personnel need to know the cause of the malfunction and to correct it immediately. There are no diagnostic models of condensers in the Republic of Kazakhstan at the moment. In this regard, a mathematical model of a condenser based on the methodology of Kaluga Turbine Plant (KTP) has been developed. The mathematical model makes it possible to change the input parameters, plot dependency diagrams, and calculate the plant efficiency indicators. The mathematical model of the condenser can be used to research ways for the improvement of the condensing unit efficiency, for diagnostic purposes of the equipment condition, for the energy audit conduction of the plant, and in the training when performing virtual laboratory research. Using static data processing by linear regression method we obtain that the KTP methodology of condenser calculation is fair at cooling water temperature from 20 °C to 24 °C, but at cooling water temperature from 20 °C to 28 °C, the methodology of JSC "All-Russia Thermal Engineering Institute" (JSC "VTI") is used. One of the ways to increase the condenser efficiency has been proposed. It is the heat transfer augmentation with riffling annular grooves on tubes. This method increases the heat transfer coefficient by 2%, reduces the water subcooling of the heating steam by 0.9 °C, and decreases the cooling area by 2%.

The Influence on the Physical and Mechanical Properties of the Tread by Preheating of Raw Rubber

2012 ◽  
Vol 501 ◽  
pp. 114-116
Author(s):  
Chuang Sheng Wang ◽  
Feng Bao Bai
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Water Temperature ◽  
Fill Factor ◽  
Cooling Water ◽  
Physical And Mechanical Properties ◽  
Rotor Speed ◽  
Cooling Water Temperature

This paper using synchronous rotor mixer, had researched the influence of preheating of raw rubber on the physical and mechanical properties of the tread under the same fill factor, rotor speed, cooling water temperature, and the pressure on top of bolt. According to processing and analysis of the experimental data, we can conclude that: As the temperature of raw rubber increased, the physical and mechanical properties of the tread had changed.

Sign in / Sign up

Export Citation Format

Share Document