scholarly journals Influence of Particle Size and Drug Load on Amorphous Solid Dispersions Containing pH-Dependent Soluble Polymers and the Weak Base Ketoconazole

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Marius Monschke ◽  
Kevin Kayser ◽  
Karl G. Wagner
Keyword(s):  
Particle Size ◽  
Phase Separation ◽  
Solid Dispersions ◽  
Amorphous Solid ◽  
Amorphous Solid Dispersions ◽  
Drug Load ◽  
Soluble Polymers ◽  
Eudragit L100 ◽  
Ph Dependent ◽  
Hot Melt

AbstractAmong the great number of poorly soluble drugs in pharmaceutical development, most of them are weak bases. Typically, they readily dissolve in an acidic environment but are prone to precipitation at elevated pH. This was aimed to be counteracted by the preparation of amorphous solid dispersions (ASDs) using the pH-dependent soluble polymers methacrylic acid ethylacrylate copolymer (Eudragit L100–55) and hydroxypropylmethylcellulose acetate succinate (HPMCAS) via hot-melt extrusion. The hot-melt extruded ASDs were of amorphous nature and single phased with the presence of specific interactions between drug and polymer as revealed by X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy (FT-IR). The ASDs were milled and classified into six particle size fractions. We investigated the influence of particle size, drug load, and polymer type on the dissolution performance. The best dissolution performance was achieved for the ASD made from Eudragit L100–55 at a drug load of 10%, whereby the dissolution rate was inversely proportional to the particle size. Within a pH-shift dissolution experiment (from pH 1 to pH 6.8), amorphous-amorphous phase separation occurred as a result of exposure to acidic medium which caused markedly reduced dissolution rates at subsequent higher pH values. Phase separation could be prevented by using enteric capsules (Vcaps Enteric®), which provided optimal dissolution profiles for the Eudragit L100–55 ASD at a drug load of 10%.

scholarly journals Processing of Polyvinyl Acetate Phthalate in Hot-Melt Extrusion—Preparation of Amorphous Solid Dispersions

Pharmaceutics ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 337 ◽  
Author(s):  
Marius Monschke ◽  
Kevin Kayser ◽  
Karl G. Wagner
Keyword(s):  
Polyvinyl Acetate ◽  
Solid Dispersions ◽  
Amorphous Solid ◽  
Hot Melt Extrusion ◽  
Extrusion Process ◽  
Dissolution Time ◽  
Melt Extrusion ◽  
Amorphous Solid Dispersions ◽  
Ph Dependent ◽  
Hot Melt

The preparation of amorphous solid dispersions (ASDs) is a suitable approach to overcome solubility-limited absorption of poorly soluble drugs. In particular, pH-dependent soluble polymers have proven to be an excellently suitable carrier material for ASDs. Polyvinyl acetate phthalate (PVAP) is a polymer with a pH-dependent solubility, which is as yet not thoroughly characterized regarding its suitability for a hot-melt extrusion process. The objective of this study was to assess the processability of PVAP within a hot-melt extrusion process with the aim of preparing an ASD. Therefore, the influence of different process parameters (temperature, feed-rate) on the degree of degradation, solid-state and dissolution time of the neat polymer was studied. Subsequently, drug-containing ASDs with indomethacin (IND) and dipyridamole (DPD) were prepared, respectively, and analyzed regarding drug content, solid-state, non-sink dissolution performance and storage stability. PVAP was extrudable in combination with 10% (w/w) PEG 3000 as plasticizer. The dissolution time of PVAP was only slightly influenced by different process parameters. For IND no degradation occurred in combination with PVAP and single phased ASDs could be generated. The dissolution performance of the IND-PVAP ASD at pH 5.5 was superior and at pH 6.8 equivalent compared to commonly used polymers hydroxypropylmethylcellulose acetate succinate (HPMCAS) and Eudragit L100-55.

scholarly journals Modelling phase separation in amorphous solid dispersions

2019 ◽  
Vol 94 ◽  
pp. 410-424 ◽  
Author(s):  
Martin Meere ◽  
Giuseppe Pontrelli ◽  
Sean McGinty
Keyword(s):  
Phase Separation ◽  
Solid Dispersions ◽  
Amorphous Solid ◽  
Amorphous Solid Dispersions

scholarly journals Influence of Carbamazepine Dihydrate on the Preparation of Amorphous Solid Dispersions by Hot Melt Extrusion

Pharmaceutics ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 379 ◽  
Author(s):  
Xiangyu Ma ◽  
Felix Müller ◽  
Siyuan Huang ◽  
Michael Lowinger ◽  
Xu Liu ◽  
...  
Keyword(s):  
Energy State ◽  
Solid Dispersions ◽  
Amorphous Solid ◽  
Hot Melt Extrusion ◽  
Water Soluble ◽  
Melt Extrusion ◽  
Amorphous Solid Dispersions ◽  
Water Soluble Drugs ◽  
The Impact ◽  
Hot Melt

Amorphous solid dispersions (ASDs) are commonly used in the pharmaceutical industry to improve the dissolution and bioavailability of poorly water-soluble drugs. Hot melt extrusion (HME) has been employed to prepare ASD based products. However, due to the narrow processing window of HME, ASDs are normally obtained with high processing temperatures and mechanical stress. Interestingly, one-third of pharmaceutical compounds reportedly exist in hydrate forms. In this study, we selected carbamazepine (CBZ) dihydrate to investigate its solid-state changes during the dehydration process and the impact of the dehydration on the preparation of CBZ ASDs using a Leistritz micro-18 extruder. Various characterization techniques were used to study the dehydration kinetics of CBZ dihydrate under different conditions. We designed the extrusion runs and demonstrated that: 1) the dehydration of CBZ dihydrate resulted in a disordered state of the drug molecule; 2) the resulted higher energy state CBZ facilitated the drug solubilization and mixing with the polymer matrix during the HME process, which significantly decreased the required extrusion temperature from 140 to 60 °C for CBZ ASDs manufacturing compared to directly processing anhydrous crystalline CBZ. This work illustrated that the proper utilization of drug hydrates can significantly improve the processability of HME for preparing ASDs.

Sign in / Sign up

Export Citation Format

Share Document