Estimation of Corrosion Fatigue-Crack Growth through Frequency Shedding Method

2012 ◽  
pp. 179-196
Author(s):  
Raghu V. Prakash ◽  
Sampath Dhinakaran
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Corrosion Fatigue ◽  
Corrosion Fatigue Crack ◽  
Corrosion Fatigue Crack Growth

Corrosion-Fatigue Crack Growth in Age-Hardened Al Alloys: Examples of Failures and Explanations for Fractographic Observations

2014 ◽  
Vol 891-892 ◽  
pp. 248-253 ◽  
Author(s):  
Rohan Byrnes ◽  
Noel Goldsmith ◽  
Mark Knop ◽  
Stan Lynch
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Corrosion Fatigue ◽  
Compact Tension ◽  
Al Alloys ◽  
Corrosion Fatigue Crack ◽  
Crack Tips ◽  
Corrosion Fatigue Crack Growth ◽  
Additional Support

The characteristics of corrosion-fatigue in age-hardened Al alloys, e.g. brittle striations on cleavage-like facets, are described, with reference to two examples of component failure. Mechanisms of corrosion fatigue (and explanations for fracture-surface features) are then reviewed. New observations of corrosion-fatigue crack growth for 7050-T7451 alloy compact-tension specimens tested in aqueous environments using a constant (intermediate) ΔK value but different cycle frequencies are then described and discussed. These observations provide additional support for a hydrogen-embrittlement process involving adsorption-induced dislocation-emission from crack tips.

scholarly journals Corrosion fatigue crack growth mechanisms in offshore monopile steel weldments

2017 ◽  
Vol 40 (11) ◽  
pp. 1868-1881 ◽  
Author(s):  
O. Adedipe ◽  
F. Brennan ◽  
A. Mehmanparast ◽  
A. Kolios ◽  
I. Tavares
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Corrosion Fatigue ◽  
Growth Mechanisms ◽  
Corrosion Fatigue Crack ◽  
Corrosion Fatigue Crack Growth

Corrosion-Fatigue Crack Growth Performance of Titanium Grade 29 Welds in Tapered Stress Joints

2021 ◽  
Vol 143 (6) ◽  
Author(s):  
Gabriel Rombado ◽  
David A. Baker ◽  
Lars M. Haldorsen ◽  
Pedro da Silva Craidy ◽  
Jim H. Feiger ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Corrosion Fatigue ◽  
High Strength ◽  
Potential Effect ◽  
Steel Catenary Riser ◽  
Corrosion Fatigue Crack ◽  
Corrosion Fatigue Crack Growth ◽  
Titanium Grade

Abstract Design of a steel catenary riser requires the use of connection hardware to decouple the large bending moments induced by the host floater at the hang-off location. Reliability of this connection hardware is essential, particularly in applications involving high pressure and high temperature fluids. One option for this connection hardware is the metallic tapered stress joint. Titanium (Ti) Grade 29 has been identified as an attractive material candidate for demanding stress joint applications due to its “high strength, low weight, superior fatigue performance and innate corrosion resistance”.2 Titanium stress joints for deepwater applications are typically not fabricated as a single piece due to titanium ingot volume limitations, thus making an intermediate girth weld necessary to satisfy length requirements. As with steel, the potential effect of hydrogen embrittlement induced by cathodic and galvanic potentials must be assessed to ensure long-term weld integrity. This paper describes testing from a joint industry project (JIP) conducted to qualify titanium stress joint (TSJ) welds for ultra-deepwater applications under harsh service and environmental conditions. Corrosion-fatigue crack growth rate (CFCGR) results for Ti Grade 29 flat welding-groove weld (1G/PA) gas tungsten arc welding (GTAW) specimens in seawater under cathodic potential and sour brine under galvanic potential are presented and compared to vendor recommended design curves.

Threshold Corrosion Fatigue Crack Growth in Steels

1978 ◽  
Vol 6 (1) ◽  
pp. 66 ◽  
Author(s):  
RT Horstman ◽  
KC Lieb ◽  
RL Meltzer ◽  
IC Moore ◽  
LKL Tu ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Corrosion Fatigue ◽  
Corrosion Fatigue Crack ◽  
Corrosion Fatigue Crack Growth

The characteristics of load frequency of corrosion fatigue crack growth rate for Ti–6Al–4V alloys

2016 ◽  
Vol 9 (4) ◽  
pp. 275-289
Author(s):  
A. Toshimitsu Yokobori ◽  
Hajime Nunokawa ◽  
Toshihito Ohmi ◽  
Shuichi Takagi ◽  
S. Takeda
Keyword(s):  
Growth Rate ◽  
Fatigue Crack ◽  
Crack Growth Rate ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Fatigue Crack Growth Rate ◽  
Corrosion Fatigue ◽  
Corrosion Fatigue Crack ◽  
Load Frequency ◽  
Corrosion Fatigue Crack Growth
Sign in / Sign up

Export Citation Format

Share Document