Predictive tool for frictional performance of piston ring-pack/liner conjunction

2019 ◽  
Vol 13 (3) ◽  
pp. 5513-5527
Author(s):  
J. W. Tee ◽  
S. H. Hamdan ◽  
W. W. F. Chong
Keyword(s):  
Film Thickness ◽  
Mathematical Models ◽  
Piston Ring ◽  
Published Data ◽  
Predictive Tool ◽  
Frictional Losses ◽  
Fundamental Understanding ◽  
Minimum Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

Fundamental understanding of piston ring-pack lubrication is essential in reducing engine friction. This is because a substantial portion of engine frictional losses come from piston-ring assembly. Hence, this study investigates the tribological impact of different piston ring profiles towards engine in-cylinder friction. Mathematical models are derived from Reynolds equation by using Reynolds’ boundary conditions to generate the contact pressure distribution along the complete piston ring-pack/liner conjunction. The predicted minimum film thickness is then used to predict the friction generated between the piston ring-pack and the engine cylinder liner. The engine in-cylinder friction is predicted using Greenwood and Williamson’s rough surface contact model. The model considers both the boundary friction and the viscous friction components. These mathematical models are integrated to simulate the total engine in-cylinder friction originating from the studied piston ring-pack for a complete engine cycle. The predicted minimum film thickness and frictional properties from the current models are shown to correlate reasonably with the published data. Hence, the proposed mathematical approach prepares a simplistic platform in predicting frictional losses of piston ring-pack/liner conjunction, allowing for an improved fundamental understanding of the parasitic losses in an internal combustion engine.

scholarly journals An investigation into the oil transport and starvation of piston ring pack

2018 ◽  
Vol 233 (1) ◽  
pp. 112-124 ◽  
Author(s):  
SR Bewsher ◽  
M Mohammadpour ◽  
H Rahnejat ◽  
G Offner ◽  
O Knaus
Keyword(s):  
Film Thickness ◽  
Boundary Conditions ◽  
Piston Ring ◽  
Gasoline Engine ◽  
Reverse Flow ◽  
Lubricant Film ◽  
Total Power ◽  
Lubricant Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

In order to accurately predict the lubricant film thickness and generated friction in any tribological contact, it is important to determine appropriate boundary conditions, taking into account the oil availability and extent of starvation. This paper presents a two-dimensional hydrodynamic model of a piston ring pack for prediction of lubricant film thickness, friction and total power loss. The model takes into account starvation caused by reverse flow at the conjunctional inlet wedge, and applied to a ring pack, comprising a compression and scraper ring. Inlet boundaries are calculated for an engine cycle of a four-cylinder, four-stroke gasoline engine operating at 1500 r/min with conditions pertaining to the New European Drive Cycle. The analysis shows the two main sources of starvation: first, due to a physical lack of inlet meniscus and second, due to reverse flow at the inlet wedge significantly affecting the prevailing conditions from the generally assumed idealised boundary conditions. Such an approach has not hitherto been reported in literature.

An Integrated Model of Ring Pack Performance

1991 ◽  
Vol 113 (3) ◽  
pp. 382-389 ◽  
Author(s):  
R. Keribar ◽  
Z. Dursunkaya ◽  
M. F. Flemming
Keyword(s):  
Internal Combustion Engines ◽  
Piston Ring ◽  
Engine Speed ◽  
Integrated Model ◽  
Design Parameters ◽  
Combustion Engines ◽  
Predictive Tool ◽  
Engine Friction ◽  
Piston Ring Pack ◽  
Ring Pack

This paper describes an integrated model developed for the detailed characterization and simulation of piston ring pack behavior in internal combustion engines and the prediction of ring pack performance. The model includes comprehensive and coupled treatments of (1) ring-liner hydrodynamic and boundary lubrication and friction; (2) ring axial, radial, and (toroidal) twist dynamics; (3) inter-ring gas dynamics and blowby. The physics of each of these highly inter-related phenomena are represented by submodels, which are intimately coupled to form a design-oriented predictive tool aimed at the calculation of ring film thicknesses, ring motions, land pressures, engine friction, and blowby. The paper also describes the results of a series of analytical studies investigating effects of engine speed and load and ring pack design parameters, on ring motions, film thicknesses, and inter-ring pressures, as well as ring friction and blowby.

Two-dimensional lubrication study of the piston ring pack

1998 ◽  
Vol 212 (3) ◽  
pp. 215-220 ◽  
Author(s):  
K Liu ◽  
Y. B. Xie ◽  
C. L. Gui
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Cylinder Wall ◽  
Asperity Contact ◽  
Two Dimensional ◽  
Oil Film ◽  
Secondary Motion ◽  
Piston Ring Pack ◽  
Ring Pack ◽  
Piston Ring Lubrication

Based on the two-dimensional average flow model and asperity contact model, a theoretical model for the non-axisymmetrical analysis of piston ring lubrication has been suggested in this paper. The two-dimensional distribution of oil-film thickness between the piston rings and cylinder wall is obtained. Results show that the oil-film thickness along the circumference is non-uniform. Starvation is also considered in the model. The effect of secondary motion of piston assemblies on the lubrication property of the piston ring pack has also been studied.

Mixed Lubrication and Friction Power Loss of Piston Ring Pack

2014 ◽  
Vol 668-669 ◽  
pp. 205-208
Author(s):  
Xiao Ri Liu ◽  
Guo Xiang Li ◽  
Shu Zhan Bai ◽  
Yu Ping Hu
Keyword(s):  
Diesel Engine ◽  
Film Thickness ◽  
Power Loss ◽  
Piston Ring ◽  
Asperity Contact ◽  
Simultaneous Solution ◽  
Oil Film ◽  
Friction Power ◽  
Piston Ring Pack ◽  
Ring Pack

With consideration of asperity contact, the minimum oil film thickness and friction power loss are calculated by simultaneous solution of the dynamics, blow-by and lubrication of piston ring pack. Take the piston ring pack in the first cylinder from the free end of a six-cylinder diesel engine for example, results show that the asperity contact takes place at all of the compression rings and oil ring; the minimum oil film thickness is 1.04μm at the top ring; the total friction loss power is 0.94kW, the top ring accounts for 37.2%, the second ring accounts for 33.0%, the oil ring accounts for 29.8%.

Gas flow through the piston ring pack

2018 ◽  
Author(s):  
Petr Veigend ◽  
Gabriela Necasov ◽  
Peter Raffai ◽  
Vclav Åtek ◽  
Jir Kunovsk
Keyword(s):  
Gas Flow ◽  
Piston Ring ◽  
Flow Through ◽  
Piston Ring Pack ◽  
Ring Pack

Lubricant Flow Optimization of Large Two Stroke Marine Diesel Engine Piston Ring Packs

2016 ◽  
Author(s):  
Matthias Stark ◽  
Richard Mittler
Keyword(s):  
Piston Ring ◽  
Superior Performance ◽  
Exhaust Gas ◽  
Oil Consumption ◽  
Major Step ◽  
Oil Transportation ◽  
Lubrication Performance ◽  
Marine Diesel ◽  
Piston Ring Pack ◽  
Ring Pack

Approaching a characterization of different contributors to the lube oil balance of an engine becomes important when aiming at enhancing lubrication performance and reducing its contribution to exhaust gas emissions. It is essential to quantify relevant data helping to determine lubrication losses related to particular tribosystem components. Recent activities focused on rating distinct tribosystem component effects on their contribution to total lube oil consumption and the possibility to most effectively modify those. This paper thus describes the most effective tribosystem component modifications, consisting of the application of a substantially modified piston ring pack and the introduction of lube oil accumulating grooves in order to considerably enhance lubrication performance. A proper prediction of piston ring pack dynamics and tribodynamic effects on the lube oil film is essential to design a superior piston ring pack in terms of an optimized piston running behaviour and lube oil transportation. One major step designing such a ring pack is based on the consequent application of a novel 3D piston ring pack simulation tool to enhance lube oil transportation characteristics and distribution. Lube oil accumulating grooves are introduced to reduce lubrication losses due to so called ring pack spray. The ring pack spray is a result of accumulated lubricant in the pressurized piston ring pack expanding into the scavenge air receiver during the scavenging phase. Mentioned effect was analysed in detail in order to determine the amount of related lubricant losses. Investigations in this context lead to the application of lube oil accumulating grooves and hence can be considered an important design aspect to reduce total lube oil consumption. Tribosystem performance validation was performed on the basis of the application of an SO2 tracing technology on a full scale engine test in order to determine relevant tribosystem component modifications in real time. The sulphur content of fuel and lube oil considerably influences the formation of particulate matter in the exhaust gas, following chemical reactions of sulphur oxidation. Hence detecting SO2 in the exhaust gas is a direct measure to determine the amount of lubricant in the exhaust gas composition. Finally this report demonstrates measurement results describing the superior performance of the modified tribosystem.

Detailed analysis of piston secondary motion and tribological performance

2019 ◽  
Vol 21 (9) ◽  
pp. 1647-1661 ◽  
Author(s):  
Cristiana Delprete ◽  
Abbas Razavykia ◽  
Paolo Baldissera
Keyword(s):  
Piston Ring ◽  
Hydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Tribological Performance ◽  
System Of Nonlinear Equations ◽  
Piston Skirt ◽  
Wide Range ◽  
Secondary Motion ◽  
Piston Ring Pack ◽  
Ring Pack

This article presents a detailed analytical model to evaluate piston skirt tribology under hydrodynamic lubrication. The contribution of the piston ring pack lubrication has been taken into account to study piston secondary motion and tribological performance. A system of nonlinear equations comprising Reynolds equation and force equilibrium is solved to calculate piston ring pack friction force and its moment about wrist pin axis. Instantaneous minimum oil film thickness at piston ring/liner interface has been estimated considering different boundary conditions: full Sommerfeld, oil separation, and Reynolds cavitation and reformation. The ring pack model has capability to be used for a wide range of ring face profiles under boundary and hydrodynamic lubrication. Piston secondary motion is evaluated using lubrication theory and equilibrium of forces and moments, to examine the effect of wrist pin location, piston skirt/liner clearance, and oil rheology. Numerical method and finite difference scheme have been used to define piston eccentricity and hydrodynamic pressure acting over the skirt.

Tribological effect of piston ring pack on the crankshaft torsional vibration of diesel engine

2014 ◽  
Vol 16 (7) ◽  
pp. 908-921
Author(s):  
Wanyou Li ◽  
Yibin Guo ◽  
Xiqun Lu ◽  
Xuan Ma ◽  
Tao He ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Torsional Vibration ◽  
Piston Ring ◽  
Piston Ring Pack ◽  
Ring Pack
Sign in / Sign up

Export Citation Format

Share Document