Synthesis of ternary alloys Mg2Ni0.75Pd0.25 and studies on its surface properties

1990 ◽  
Vol 5 (7) ◽  
pp. 1431-1434 ◽  
Author(s):  
Zhang Yunshi ◽  
Ji Jianhua ◽  
Yuan Huatang ◽  
Chen Shengchang ◽  
Wang Da ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Properties ◽  
Ternary Alloy ◽  
Ternary Alloys ◽  
Diffusion Method ◽  
X Ray ◽  
Bet Method ◽  
Scanning Electron

The ternary alloy Mg2Ni0.75Pd0.25 was made by the Replacement-Diffusion Method (RDM). Using x-ray analysis, scanning electron microscopy, AES analysis, and the BET method, the authors were able to characterize the structure of the alloy and study its surface properties. It has been found that the alloy thus obtained has excellent surface properties compared to that prepared metallurgically.

Biocidal activity of curcumin and cationic polymer possessing composites

2020 ◽  
Vol 35 (4-5) ◽  
pp. 389-398
Author(s):  
Tarık Eren ◽  
Gülay Baysal ◽  
Faik Doğan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Curcuma Longa ◽  
Antibacterial Properties ◽  
Fourier Transform Infrared ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

There is a growing interest in new type of biocidal compounds with antibacterial properties against bacteria. In this study, new antibacterial synthetic materials bearing curcumin and cationic polymers were synthesized. In the synthesis stage, the methacrylate functional cationic monomer was synthesized via the Michael addition route by using 3-acryloxy-2-hydroxypropyl methacrylate and 3-amino pyridine to obtain Monomer 1. Monomer 1 was further quaternized with hexyl bromide to obtain a cationic methacrylate functional monomer. Free-radical polymerization of Monomer 1 and methyl acrylate was conducted in the presence of azobisisobutyronitrile under dimethylformamide solvent. The composite formulation was conducted by using turmeric extract Curcuma longa (curcumin), hydroxyapatite, montmorillonite, and silver nitrate. The materials were analyzed by using the methods of X-ray diffraction, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and scanning electron microscopy. The biocidal activities against the bacteria Escherichia coli, Listeria monocytogenes, Salmonella, and Staphylococcus aureus were analyzed using agar well diffusion method. From the Fourier transform infrared, X-ray diffraction, and scanning electron microscopy analysis results of the synthesized nanocomposites, it is seen that they form strong connections with the components added to the composites and form an exfoliated structure. According to the antibacterial analysis results, the nanocomposites obtained have showed a strong antibacterial resistance against E.coli, L.monocytogenes, Salmonella, and S. aureus bacteria, and the high inhibition zone areas were obtained.

Mechanical and tribological studies of sintered nickel-based ternary alloys

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bukola Joseph Babalola ◽  
Ojo Jeremiah Akinribide ◽  
Olukayode Samuel Akinwamide ◽  
Peter Apata Olubambi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Ternary Alloys ◽  
Tribological Characteristics ◽  
Indentation Hardness ◽  
Elemental Distribution ◽  
Content Type ◽  
X Ray ◽  
Mechanical And Tribological Characteristics ◽  
Scanning Electron

Purpose During the operation of nickel-based alloys as blades and discs in turbines, the sliding activity between metallic surfaces is subjected to structural and compositional changes. In as much as friction and wear are influenced by interacting surfaces, it is necessary to investigate these effects. This study aims to understand better the mechanical and tribological characteristics of Ni-17Cr-10X (X = Mo, W, Ta) ternary alloy systems developed via spark plasma sintering (SPS) technique. Design/methodology/approach Nickel-based ternary alloys were fabricated via SPS technique at 50 MPa, 1100 °C, 100 °C/min and a dwell time of 10 mins. Scanning electron microscopy, X-Ray diffraction, energy dispersive X-ray spectroscopy, nanoindentation techniques and tribometer were used to assess the microstructure, phase composition, elemental dispersion, mechanical and tribological characteristics of the sintered nickel-based alloys. Findings The outcome of the investigation showed that the Ni-17Cr10Mo alloy exhibited the highest indentation hardness value of 8045 MPa, elastic modulus value of 386 GPa and wear resistance. At the same time, Ni-17Cr10W possessed the least mechanical and wear properties. Originality/value It can be shown that the SPS technique is efficient in the development of nickel-based alloys with good elemental distribution and without defects such as segregation of alloying elements, non-metallic inclusions. This is evident from the scanning electron microscopy micrographs.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Scanning Electron Microscopy and X-Ray Analyses of Dental Tissues from a Hibernator

1976 ◽  
Vol 34 ◽  
pp. 178-179
Author(s):  
M. L. Zimny ◽  
A. C. Haller
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Body Temperature ◽  
Ground Squirrel ◽  
Alveolar Bone ◽  
X Ray ◽  
Dental Tissues ◽  
Bone Minerals ◽  
Apical Tooth ◽  
Scanning Electron

During hibernation the ground squirrel is immobile, body temperature reduced and metabolism depressed. Hibernation has been shown to affect dental tissues varying degrees, although not much work has been done in this area. In limited studies, it has been shown that hibernation results in (1) mobilization of bone minerals; (2) deficient dentinogenesis and degeneration of alveolar bone; (3) presence of calculus and tears in the cementum; and (4) aggrevation of caries and pulpal and apical tooth abscesses. The purpose of this investigation was to study the effects of hibernation on dental tissues employing scanning electron microscopy (SEM) and related x-ray analyses.

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

1995 ◽  
Vol 53 ◽  
pp. 692-693
Author(s):  
Yun Lu ◽  
David C. Joy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Morphological Development ◽  
Early Hydration ◽  
X Ray ◽  
Blended Cements ◽  
Powder Particles ◽  
Chemical Wastes ◽  
Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Defects of Platelet Function Recognized by X-Ray Imaging and Scanning Electron Microscopy

1985 ◽  
Vol 43 ◽  
pp. 610-613
Author(s):  
M.G. Baldini ◽  
S. Morinaga ◽  
D. Minasian ◽  
R. Feder ◽  
D. Sayre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Biology ◽  
Imaging Technique ◽  
Human Platelets ◽  
X Rays ◽  
X Ray ◽  
X Ray Imaging ◽  
Complex Phenomena ◽  
Scanning Electron

Contact X-ray imaging is presently developing as an important imaging technique in cell biology. Our recent studies on human platelets have demonstrated that the cytoskeleton of these cells contains photondense structures which can preferentially be imaged by soft X-ray imaging. Our present research has dealt with platelet activation, i.e., the complex phenomena which precede platelet appregation and are associated with profound changes in platelet cytoskeleton. Human platelets suspended in plasma were used. Whole cell mounts were fixed and dehydrated, then exposed to a stationary source of soft X-rays as previously described. Developed replicas and respective grids were studied by scanning electron microscopy (SEM).

Environmental scanning electron microscopy of fresh human gallstones reveals new morphologies of precipitated calcium salts

1992 ◽  
Vol 50 (2) ◽  
pp. 1322-1323
Author(s):  
Howard S. Kaufman ◽  
Keith D. Lillemoe ◽  
John T. Mastovich ◽  
Henry A. Pitt
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
Calcium Salts ◽  
Cholesterol Gallstones ◽  
X Ray ◽  
Ca Carbonate ◽  
Scanning Electron

Gallstones contain precipitated cholesterol, calcium salts, and proteins. Calcium (Ca) bilirubinate, palmitate, phosphate, and carbonate occurring in gallstones have variable morphologies but characteristic windowless energy dispersive x-ray (EDX) spectra. Previous studies of gallstone microstructure and composition using scanning electron microscopy (SEM) with EDX have been limited to dehydrated samples. In this state, Ca bilirubinates appear as either glassy masses, which predominate in black pigment stones, or as clusters, which are found mostly in cholesterol gallstones. The three polymorphs of Ca carbonate, calcite, vaterite, and aragonite, have been identified in gallstones by x-ray diffraction, however; the morphologies of these crystals vary in the literature. The purpose of this experiment was to study fresh gallstones by environmental SEM (ESEM) to determine if dehydration affects gallstone Ca salt morphology.Gallstones and bile were obtained fresh at cholecystectomy from 6 patients. To prevent dehydration, stones were stored in bile at 37°C. All samples were studied within 4 days of procurement.

Sign in / Sign up

Export Citation Format

Share Document