Ultra-high Molecular Weight Polyethylene /Graphite Nanocomposites Prepared by High-energy Cryomilling.

2013 ◽  
Vol 1453 ◽  
Author(s):  
Sofía Vazquez-Rodriguez ◽  
Gloria E. Rodríguez-Vázquez ◽  
Selene Sepulveda-Guzman ◽  
Martín E. Reyes-Melo ◽  
Aaron Morelos-Gomez ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Mechanical Performance ◽  
Thermal Characterization ◽  
High Energy ◽  
Graphite Nanoplatelets ◽  
Scanning Calorimetry ◽  
Ultra High Molecular Weight ◽  
Graphite Nanocomposites

ABSTRACTUltra-high molecular weight polyethylene/graphite nanocomposites were prepared by high-energy cryogenic milling followed by syntering. Microstructure changes shows that graphite was reduced to graphite nanoplatelets by high-energy cryomilling and partial exfoliation of graphite to few layered graphene nanoplatelets occurred in a small extent. The resulting nanocomposites revealed high electrical conductivity and good mechanical performance. Thermal characterization of the nanocomposites was also carried out by differential scanning calorimetry.

Mechanistic Study and Characterization of Cold-Sprayed Ultra-High Molecular Weight Polyethylene-Nano-ceramic Composite Coating

2015 ◽  
Vol 25 (1-2) ◽  
pp. 160-169 ◽  
Author(s):  
Kesavan Ravi ◽  
Yuji Ichikawa ◽  
Kazuhiro Ogawa ◽  
Tiana Deplancke ◽  
Olivier Lame ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Composite Coating ◽  
Ceramic Composite ◽  
Mechanistic Study ◽  
Ultra High Molecular Weight

Fabrication of Kevlar®-reinforced ultra-high molecular weight polyethylene composite through microwave-assisted compression molding for body armor applications

2020 ◽  
pp. 073168442095944
Author(s):  
Taresh Guleria ◽  
Nishant Verma ◽  
Sunny Zafar ◽  
Vivek Jain
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Energy Absorption ◽  
Compression Molding ◽  
High Energy ◽  
Impact Testing ◽  
Uniaxial Tensile ◽  
Microwave Assisted ◽  
Uniaxial Tensile Testing ◽  
Ultra High Molecular Weight

Kevlar®-reinforced composites are used in high energy absorption applications. In the present work, Kevlar®-reinforced ultra-high molecular weight polyethylene composites were fabricated through microwave-assisted compression molding. The microwave-assisted compression molding parameters were optimized through trial and error method. Analysis of mechanical behavior of composites was accessed through uniaxial tensile testing, flexural testing, impact testing, and nano-indentation. The fractured specimens were observed using scanning electron microscopy. An increment of 92.2% was observed in the ultimate tensile strength of the ultra-high molecular weight polyethylene/Kevlar® composite compared to neat ultra-high molecular weight polyethylene. Flexural properties, impact energy absorption rate, and hardness property of the composite were increased by 27.1%, 91.6%, and 4.77%, respectively, compared to pure ultra-high molecular weight polyethylene. Enhanced mechanical properties may be attributed to unique microwave heating phenomena during microwave-assisted compression molding.

scholarly journals Thermal characterization of novel aliphatic polyesters with ether and thioether linkages

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
M. Soccio ◽  
N. Lotti ◽  
L. Finelli ◽  
A. Munari
Keyword(s):  
Thermal Stability ◽  
Molecular Weight ◽  
Chemical Structure ◽  
Room Temperature ◽  
Crystallization Rate ◽  
Thermal Characterization ◽  
Scanning Calorimetry ◽  
Aliphatic Polyesters ◽  
Good Thermal Stability

AbstractSeveral novel ether or thioether linkage containing aliphatic polyesters and poly(alkylene dicarboxylate)s were synthesized for comparison and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability, even though lower for the ether or thioether linkage-containing polyesters. The decrement of the thermal stability appears to be more relevant in the case of the presence of sulphur atoms. At room temperature the samples appeared semicrystalline, except PTTDG and PDEDG, which were viscous oils; the effect of the introduction of ether or thioether group was an increment of the Tgvalue, a decrement of the melting temperature and a significant decrease of the crystallization rate. The entity of the variations was found to be affected by the kind of group introduced, and the trend observed can be explained on the basis of atom electronegativity and dimensions

Sign in / Sign up

Export Citation Format

Share Document