Role of the Interfaces on the Activation of Slip Systems in The PST TiAl Alloy

1998 ◽  
Vol 552 ◽  
Author(s):  
Slim Zghal ◽  
Haruyuki Inui ◽  
Masaharu Yamaguchi ◽  
Alain Couret
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tial Alloy ◽  
Slip Systems ◽  
Post Mortem ◽  
Transmission Electron ◽  
In Situ Observations ◽  
Deformation Modes

ABSTRACTThe operative slip systems in the so-called PST alloy are determined by transmission electron microscopy. Both post-mortem analyses and in situ observations are presented. It is shown that glide of ordinary dislocations and twinning are the most easily deformation modes activated at yield. The role of the interfaces on the activation of these operative slip systems is then examined and discussed.

scholarly journals Unravelling the characteristics of Al-alloy corrosion at the atomic to nanometre scale by transmission electron microscopy

2020 ◽  
Vol 326 ◽  
pp. 01007
Author(s):  
Shravan K. Kairy ◽  
Nick Birbilis
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Al Alloy ◽  
Second Phase ◽  
Clear Understanding ◽  
Transmission Electron ◽  
Second Phase Particles ◽  
Al Matrix

The localised corrosion associated with Mg2Si in the Al-matrix of an Al-Mg-Si alloy was studied in 0.1 M NaCl at pH 6 by quasi in-situ transmission electron microscopy. Herein, physical imaging of corrosion at the atomic to nanometre scale was performed. Phase transformation and subsequent chemical composition variations associated with the localised corrosion of Mg2Si were studied. It was observed that corrosion initiated upon Mg2Si, often preferentially at the interface with the Al-matrix, and propagated until Mg2Si was completely dealloyed by Mg-dissolution, resulting in an amorphous SiO-rich phase remnant. The SiO-rich remnant became electrochemically inert and did not initiate corrosion in the Al-matrix. This study provides a clear understanding on the localised corrosion of Al-alloys associated with Mg2Si. In addition, the methodology followed in this study can also be applied to understand the role of precipitates and second phase particles in the localised corrosion of Al-alloy systems.

Progress in environmental high-voltage transmission electron microscopy for nanomaterials

2020 ◽  
Vol 378 (2186) ◽  
pp. 20190602
Author(s):  
Nobuo Tanaka ◽  
Takeshi Fujita ◽  
Yoshimasa Takahashi ◽  
Jun Yamasaki ◽  
Kazuyoshi Murata ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Voltage ◽  
High Energy ◽  
Transmission Electron ◽  
Recent Developments ◽  
In Situ Observations ◽  
High Voltage Transmission ◽  
And Function

A new environmental high-voltage transmission electron microscope (E-HVEM) was developed by Nagoya University in collaboration with JEOL Ltd. An open-type environmental cell was employed to enable in-situ observations of chemical reactions on catalyst particles as well as mechanical deformation in gaseous conditions. One of the reasons for success was the application of high-voltage transmission electron microscopy to environmental (in-situ) observations in the gas atmosphere because of high transmission of electrons through gas layers and thick samples. Knock-on damages to samples by high-energy electrons were carefully considered. In this paper, we describe the detailed design of the E-HVEM, recent developments and various applications. This article is part of a discussion meeting issue ‘Dynamic in situ microscopy relating structure and function'.

Clarifying the Role of Mg2Si and Si in Localized Corrosion of Aluminum Alloys by Quasi In Situ Transmission Electron Microscopy

CORROSION ◽  
10.5006/3457 ◽  
2020 ◽  
Vol 76 (5) ◽  
pp. 464-475 ◽  
Author(s):  
Shravan K. Kairy ◽  
Nick Birbilis
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnesium Silicide ◽  
Localized Corrosion ◽  
In Situ Tem ◽  
Al Alloy ◽  
Transmission Electron ◽  
Al Matrix

The role of magnesium silicide (Mg2Si) and silicon (Si) particles in the localized corrosion of aluminum (Al) alloys was investigated herein. Sub-micrometer-sized Mg2Si and Si particles were grown in the Al matrix of Al-Mg-Si and Al-Si alloys, respectively, and characterized by transmission electron microscopy (TEM). A quasi in situ TEM technique was used to study an identical location containing Mg2Si or Si particle in the Al matrix, prior to and following a period of immersion in 0.1 M NaCl at pH 6, 2, and 12. At pH 6 and 2, Mg2Si was initially “anodic,” preferentially dealloying via selective dissolution of Mg, resulting in the development of SiO-rich remnants that are electrochemically inert. The SiO-rich remnants at pH 2 physically detached from the Al matrix. Silicon particles were electrochemically inert at pH 6, while “cathodic” at pH 2, dissolving the Al matrix at their periphery. It was observed that copper (Cu) was redeposited on Si particles at pH 2. At pH 12, Mg2Si and Si were “cathodic” to the Al matrix. This study clarifies, and provides new insights into, the characteristics of Al alloy physical manifestation of corrosion associated with Mg2Si and Si at the nanoscale.

Role of Interface Boundaries in the Deformation Behavior of TiAl Polysynthetically Twinned Crystal: In situ Transmission Electron Microscopy Deformation Study

2005 ◽  
Vol 20 (7) ◽  
pp. 1888-1901 ◽  
Author(s):  
Sung G. Pyo ◽  
Nack J. Kim
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Deformation Behavior ◽  
Localized Deformation ◽  
Deformation Twins ◽  
Thin Foils ◽  
Transmission Electron ◽  
Longitudinal Orientation

To understand the role of boundaries in the deformation behavior of TiAl, in situ straining experiments in transmission electron microscopy have been performed on thin foils of polysynthetically twinned (PST) crystal of Ti–49.3 at.% Al. The deformation behavior of PST TiAl is anisotropic, depending on the angle between the lamellar boundaries and the straining axes. For L-orientation, deformation twins and ordinary dislocations transmit across the true-twin (TT) boundaries but are reflected at the pseudo-twin (PT) and rotational order-fault (RO) boundaries. For transverse (T) orientation, deformation twins are transmitted across all TT, PT, and RO boundaries. For I-orientation, shear deformation occurs parallel to the lamellar boundaries. There is a transmission of deformation across the interphase (IP) boundary in longitudinal orientation, but deformation is blocked and reflected at the IP boundary in T-orientation. The role of the various types of boundaries in localized deformation behavior was evaluated by considering Schmid factors and geometric compatibility factors.

Sign in / Sign up

Export Citation Format

Share Document