Basin and Site Effects in the U.S. Pacific Northwest Estimated from Small-Magnitude Earthquakes

2021 ◽  
Author(s):  
John M. Rekoske ◽  
Morgan P. Moschetti ◽  
Eric M. Thompson
Keyword(s):  
Shear Wave ◽  
Pacific Northwest ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Effects ◽  
Site Response ◽  
Ground Motions ◽  
Sedimentary Basins ◽  
Small Magnitude ◽  
The U.S

ABSTRACT Earthquake hazards in the U.S. Pacific Northwest (PNW) are increased by the presence of deep sedimentary basins that amplify and prolong ground shaking. To better understand basin and site effects on ground motions, we compile a database of recordings from crustal and intraslab earthquakes. We process 8028 records with magnitudes from 3.5 to 6.8 and hypocentral depths up to 62 km to compute Fourier amplitude spectra of ground acceleration for frequencies of 0–20 Hz. We compute residuals relative to the Bayless and Abrahamson (2019; hereafter, BA18) ground-motion model and perform a series of linear, crossed, mixed-effects regressions. In addition to estimating the bias, event, and site terms, we incorporate groupings for broad regionalized site response in three different regions (Seattle basin, Puget Lowland, non-Puget Lowland), for effects from seismotectonic regime (crustal and intraslab sources), and for interactions between the regions and seismotectonic regimes. We find that the scaling of site response with respect to VS30 (time-averaged shear-wave velocity from the surface to a depth of 30 m) and to basin depth indicators Z1.0 and Z2.5 (depths to the 1.0 and 2.5 km/s shear-wave velocity horizons) is generally consistent with BA18; however, the region terms display strong spatial amplification patterns. For frequencies less than 5 Hz, the Seattle basin amplifies ground motions up to a factor of four, relative to the non-Puget Lowland, with a maximum amplification around near 0.5 Hz. Sites in the Puget Lowland amplify low frequencies up to a factor of 2.5. At higher frequencies (f>5  Hz), the Puget Lowland and Seattle basin show regional deamplification of ground motions, with the smallest average amplification factor of 0.65 occurring at 10.0 Hz. Although we observe slight differences in the seismotectonic regime terms, we find that the region terms are significantly more important for modeling earthquake hazard in the PNW.

Shear-Wave Velocity Profiling of Strong Motion Sites that Recorded the 2001 Nisqually, Washington, Earthquake

2011 ◽  
Vol 27 (1) ◽  
pp. 183-212 ◽  
Author(s):  
Ivan G. Wong ◽  
Kenneth H. Stokoe ◽  
Brady R. Cox ◽  
Yin-Cheng Lin ◽  
Farn-Yuh Menq
Keyword(s):  
Spectral Analysis ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Effects ◽  
Ground Motions ◽  
Puget Sound ◽  
Strong Motion ◽  
Glacial Till ◽  
Site Class

The 2001 M 6.8 Nisqually, Washington, earthquake was recorded by more than 70 strong motion sites in and around the Puget Sound region. We have characterized the shear-wave velocity (VS) structure down to depths of 100 to 300 ft at the 32 permanent strong motion sites, which recorded the highest ground motions (peak horizontal ground accelerations [PGA] of 0.04 to 0.31 g), using the Spectral-Analysis-of-Surface-Waves (SASW) technique. Most of the surveyed sites are underlain by glacial till (Qvt) with the remaining sites on Holocene alluvium (Qal), glacial recessional (Qvr) and advance outwash deposits (Qva), or manmade fill/modified ground (m). VS30 values for Qvt and Qvr range from 1,266 to 1,769 ft/sec and 1,139 to 1,826 ft/sec, respectively, corresponding to NEHRP site class C. In general, a pattern of higher PGAs with lower VS30 was not observed suggesting that VS30 cannot account for all site effects on the 2001 Nisqually ground motions.

Estimation Study on Shear Wave Velocity of Seabed Using GRNN

2014 ◽  
Vol 580-583 ◽  
pp. 264-267
Author(s):  
Sheng Jie Di ◽  
Zhi Gang Shan ◽  
Xue Yong Xu
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Seismic Analysis ◽  
Site Response ◽  
Estimation Method ◽  
Response Analysis ◽  
Generalized Regression Neural Network ◽  
Engineering Practice ◽  
Site Classification

Characterization of the shear wave velocity of soils is an integral component of various seismic analysis, including site classification, hazard analysis, site response analysis, and soil-structure interaction. Shear wave velocity at offshore sites of the coastal regions can be measured by the suspension logging method according to the economic applicability. The study presents some methods for estimating the shear wave velocity profiles in the absence of site-specific shear wave velocity data. By applying generalized regression neural network (GRNN) for the estimation of in-situ shear wave velocity, it shows good performances. Therefore, this estimation method is worthy of being recommended in the later engineering practice.

An Empirical Geotechnical Seismic Site Response Procedure

2001 ◽  
Vol 17 (1) ◽  
pp. 65-87 ◽  
Author(s):  
Adrián Rodríguez-Marek ◽  
Jonathan D. Bray ◽  
Norman A. Abrahamson
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Classification System ◽  
Soil Depth ◽  
Site Response ◽  
Dynamic Stiffness ◽  
Evaluation Procedure ◽  
Site Classification ◽  
Seismic Site Response

A simplified empirically based seismic site response evaluation procedure that includes measures of the dynamic stiffness of the surficial materials and the depth to bedrock as primary parameters is introduced. This geotechnical site classification scheme provides an alternative to geologic-based and shear wave velocity-based site classification schemes. The proposed scheme is used to analyze the ground motion data from the 1989 Loma Prieta and 1994 Northridge earthquakes. Period-dependent and intensity-dependent spectral acceleration amplification factors for different site conditions are presented. The proposed scheme results in a significant reduction in standard error when compared with a simpler “rock vs. soil” classification system. Moreover, results show that sites previously grouped as “rock” should be subdivided as competent rock sites and weathered soft rock/shallow stiff soil sites to reduce uncertainty in defining site-dependent ground motions. Results also show that soil depth is an important parameter in estimating seismic site response. The standard errors resulting from the proposed site classification system are comparable with those obtained using the more elaborate code-based average shear-wave velocity classification system.

scholarly journals A Comparative Study on the VS30 and N30 Based Seismic Site Classification in Kahramanmaras, Turkey

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Dalia Munaff Naji ◽  
Muge K. Akin ◽  
Ali Firat Cabalar
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Soil Structure ◽  
Site Response ◽  
Dead Sea ◽  
Site Classification ◽  
Earthquake Hazards ◽  
Class D ◽  
Average Shear

Assessment of seismic site classification (SSC) using either the average shear wave velocity (VS30) or the average SPT-N values (N30) for upper 30 m in soils is the simplest method to carry out various studies including site response and soil-structure interactions. Either the VS30- or the N30-based SSC maps designed according to the National Earthquake Hazards Reduction Program (NEHRP) classification system are effectively used to predict possible locations for future seismic events. The main goal of this study is to generate maps using the Geographic Information System (GIS) for the SSC in Kahramanmaras city, influenced by both East Anatolian Fault and Dead Sea Fault Zones, using both VS30 and N30 values. The study also presents a series of GIS maps produced using the shear wave velocity (VS) and SPT-N values at the depths of 5 m, 10 m, 15 m, 20 m, and 25 m. Furthermore, the study estimates the bed rock level and generates the SSC maps for the average VS values through overburden soils by using the NEHRP system. The VS30 maps categorize the study area mainly under class C and limited number of areas under classes B and D, whereas the N30 maps classify the study area mainly under class D. Both maps indicate that the soil classes in the study area are different to a high extent. Eventually, the GIS maps complied for the purpose of urban development may be utilized effectively by engineers in the field.

Deep Shear Wave Velocity Profiles from Surface Wave Measurements in the Mississippi Embayment

2007 ◽  
Vol 23 (4) ◽  
pp. 791-808 ◽  
Author(s):  
Brent L. Rosenblad ◽  
Jianhua Li ◽  
Farn-Yuh Menq ◽  
Kenneth H. Stokoe
Keyword(s):  
Surface Wave ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Response ◽  
Source Surface ◽  
Mississippi Embayment ◽  
Near Surface ◽  
Wave Measurements ◽  
Central United States

Shear wave velocity ( VS) profiles to depths of approximately 200 m were developed from active-source surface wave velocity measurements in the Mississippi Embayment region of the Central United States. Soil deposits in this region are hundreds of meters thick, but are poorly characterized at depths below 60 m. Measurements were performed at five locations in Arkansas and Tennessee with a maximum distance between sites of approximately 130 km. The median VS profile calculated from the five profiles is in good agreement with a generic reference VS profile for the Mississippi Embayment that has been used in recent site response studies. The near-surface VS profiles at the five sites were remarkably consistent with average shear wave velocities in the top 30 m ( VS30), varying by less than 10%. Increasing variability between the VS profiles was observed at greater depths. The variability between VS profiles was shown to be correlated with changes in lithology at two of the sites where nearby lithologic information was available.

Sign in / Sign up

Export Citation Format

Share Document