Structural Behaviour of Steel Building with Diagonal and Chevron Braced CBF (Concentrically Braced Frames) by Pushover Analysis

2017 ◽  
Vol 7 (2) ◽  
pp. 716 ◽  
Author(s):  
Saloma ◽  
Yakni Idris ◽  
Hanafiah ◽  
Nico Octavianus
Keyword(s):  
Pushover Analysis ◽  
Braced Frames ◽  
Structural Behaviour ◽  
Concentrically Braced Frames ◽  
Concentrically Braced ◽  
Steel Building

Ductility Enhancement in Reinforced Concrete Structure with Buckling Restrained Braced Frames

2016 ◽  
Vol 847 ◽  
pp. 281-289
Author(s):  
Erkan Senol ◽  
Ismail Kose ◽  
Bilge Doran ◽  
Pelin Elif Mezrea ◽  
Bulent Akbas
Keyword(s):  
Reinforced Concrete ◽  
Pushover Analysis ◽  
Design Procedure ◽  
Braced Frames ◽  
Base Shear ◽  
Moment Frames ◽  
Concentrically Braced Frames ◽  
Capacity Curve ◽  
Concentrically Braced ◽  
Buckling Restrained Braced Frames

Adding braces to moment frames is considered to be quite an efficient technique for increasing the global stiffness and strength of the structure. It has not only been used in steel moment frames, but also in reinforced concrete (RC) moment frames in recent years. It certainly can increase the energy absorption capacity of structures and also decrease the demand imposed by seismic ground motions. Steel braces are anchored firmly to boundary beams and columns. They are modeled as truss elements and increase earthquake resistance of the building. Buckling restrained braced frames (BRBFs) in which members yield under both tension and compression without significant buckling have been used in recent years in order to ensure the desired seismic performance of special concentrically braced frames. BRBFs are similar to the special concentrically braced frames in that seismic accelerations are resisted by a building-frame members and diagonal braces whereas the design procedure is different. BRBs should be designed to permit ductile yielding both in compression and tension. In this paper, flat-slab RC building with two different configurations of buckling restraint braces (BRBs) is studied. The buildings have 4-storey with 5 bays in both X-and Y-directions and have been designed according to Turkish Specification of Reinforced Concrete Design (TS 500). In order to explore overall behavior up to failure and lateral load resisting capacities for these buildings, nonlinear static analyses have then been performed using SAP 2000-V14.1. Pushover analysis under constant gravity loads and monotonically increasing lateral forces during an earthquake until a target displacement is reached is generally carried out as an effective tool for performance based design. The major outcome of a pushover analysis is the capacity curve which shows the base shear vs. the roof displacement relationship and represents the overall performance of the building. The results of the analyses are presented in terms of capacity curve and energy dissipation.

Preliminary report on steel building damage from the Darfield earthquake of September 4, 2010

2010 ◽  
Vol 43 (4) ◽  
pp. 351-359 ◽  
Author(s):  
Michel Bruneau ◽  
Myrto Anagnostopoulou ◽  
Greg MacRae ◽  
Charles Clifton ◽  
Alistair Fussell
Keyword(s):  
Preliminary Report ◽  
Steel Structures ◽  
Building Damage ◽  
Braced Frames ◽  
Concentrically Braced Frames ◽  
Seismic Demands ◽  
Eccentrically Braced Frames ◽  
Concentrically Braced ◽  
Steel Building ◽  
Steel Tanks

This paper presents preliminary findings based on the performance of various steel structures during the Darfield earthquake of September 4, 2010, including concentrically braced frames, eccentrically braced frames, steel tanks, and steel houses. With a few exceptions, steel structures performed well during this earthquake, but much of this is attributed to the fact that seismic demands from the Darfield earthquake were generally lower than considered in their design.

scholarly journals Shake Table Testing of Self‐Centring Concentrically Braced Frames

ce/papers ◽  
2021 ◽  
Vol 4 (2-4) ◽  
pp. 1949-1956
Author(s):  
Jamie Goggins ◽  
Yadong Jiang ◽  
Brian M. Broderick ◽  
Suhaib Salawdeh ◽  
Gerard J. O'Reilly ◽  
...  
Keyword(s):  
Shake Table ◽  
Braced Frames ◽  
Concentrically Braced Frames ◽  
Shake Table Testing ◽  
Concentrically Braced
Sign in / Sign up

Export Citation Format

Share Document