scholarly journals Spectrophotometric Analysis Evaluating Apical Microleakage in Retrograde Filling using GIC, MTA and Biodentine: An in-vitro study

2020 ◽  
Author(s):  
Manisha Nepal ◽  
Snigdha Shubham ◽  
Rupam Tripathi ◽  
Jwolan Khadka ◽  
Deepa Kunwar ◽  
...  
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Materials ◽  
Diamond Bur ◽  
Retrograde Filling ◽  
Significant Difference ◽  
Supernatant Solution

Abstract Background The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs. Methods Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N= 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 minutes. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm. Results The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC> MTA> Biodentine> negative control group. The significant difference was observed between GIC and MTA (p=0.0001) and GIC and Biodentine (p=0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p=0.127) and Diamond bur (p=0.496) respectively. Conclusions Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

scholarly journals Spectrophotometric Analysis Evaluating Apical Microleakage in Retrograde Filling using GIC, MTA and Biodentine: An in-vitro study

2020 ◽  
Author(s):  
Manisha Nepal ◽  
Snigdha Shubham ◽  
Rupam Tripathi ◽  
Jwolan Khadka ◽  
Deepa Kunwar ◽  
...  
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Materials ◽  
Diamond Bur ◽  
Retrograde Filling ◽  
Significant Difference ◽  
Supernatant Solution

Abstract Background The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs.Methods Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N= 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 minutes. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm.esults The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC> MTA> Biodentine> negative control group. The significant difference was observed between GIC and MTA (p=0.0001) and GIC and Biodentine (p=0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p=0.127) and Diamond bur (p=0.496) respectively.Conclusions Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

scholarly journals Spectrophotometric Analysis Evaluating Apical Microleakage in Retrograde Filling using GIC, MTA and Biodentine: An in-vitro study

2019 ◽  
Author(s):  
Manisha Nepal ◽  
Snigdha Shubham ◽  
Rupam Tripathi ◽  
Jwolan Khadka ◽  
Deepa Kunwar
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Materials ◽  
Diamond Bur ◽  
Retrograde Filling ◽  
Significant Difference ◽  
Supernatant Solution

Abstract Background The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs.Methods Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N= 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 minutes. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm.Results The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC> MTA> Biodentine> negative control group. The significant difference was observed between GIC and MTA (p=0.0001) and GIC and Biodentine (p=0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p=0.127) and Diamond bur (p=0.496) respectively.Conclusions Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

In Vitro Comparison of MTA and BC RRM-Fast Set Putty as Retrograde Filling Materials

2021 ◽  
Author(s):  
Carla Arvelaiz ◽  
Andreina Fernandes ◽  
Veronica Graterol ◽  
Katiuska Gomez ◽  
Jose Francisco Gomez-Sosa ◽  
...  
Keyword(s):  
Brain Heart Infusion ◽  
Bacterial Count ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Material ◽  
Human Teeth ◽  
Retrograde Filling ◽  
Significant Difference

Abstract Background: To compare, in vitro, the bioceramic materials (MTA and BC RRM-fast set putty) capacity to prevent microleakage of Enterococcus faecalis over time. Methods: An experimental design was made with forty extracted human teeth, coronally cut, and prepared to be placed in a leakage system under sterile conditions. They were randomly divided into an experimental group: thirty teeth (fifteen for retrograde filling material MTA and BC RRM-fast set putty, respectively) and a control group: ten teeth (five positive control, five negative control). The 3 mm root-ends were submerged in a brain-heart infusion broth with a red phenol indicator. The coronal access of each sample was inoculated with E. faecalis every seven days to maintain bacterial viability. The lower chamber was evaluated daily for 30 days to observe the turbidity of the culture medium and establish the presence and day of the filtration. Calculation of the colony-forming units (CFU) was performed for each leaked sample. Results: Of the total samples prepared for each type of bioceramic material, leaked 60.0% (9/15) of the MTA group and 40.0% (6/15) of the BC RRM-fast set putty group. All positive controls filtered on the first day of evaluation, while 20% (1/5) of the negative control leaked in the second week. There was no significant difference in leakage between the bioceramic material types, nor concerning the bacterial count and the type of cement used (p = 0.101). Conclusions: This study suggests that BC RRM-fast set putty and MTA have a similar sealing capacity when used as a retrograde filling material in vitro.

scholarly journals Resistance to Fracture of Dental Roots Obturated with Different Materials

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Berkan Celikten ◽  
Ceren Feriha Uzuntas ◽  
Kamran Gulsahi
Keyword(s):  
Fracture Resistance ◽  
Testing Machine ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Positive Control Group ◽  
Control Group ◽  
Root Canal Filling ◽  
Filling Materials ◽  
Group 2

The aim of this study was to compare the vertical fracture resistance of roots obturated with different root canal filling materials and sealers. Crowns of 55 extracted mandibular premolar teeth were removed to provide root lengths of 13 mm. Five roots were saved as negative control group (canals unprepared and unfilled). Fifty root canals were instrumented and then five roots were saved as positive control group (canals prepared but unfilled). The remaining 45 roots were randomly divided into three experimental groups (n=15root/group) and obturated with the following procedures: in group 1, glass ionomer-based sealer and cone (ActiV GP obturation system); in group 2, bioceramic sealer and cone (EndoSequence BC obturation system); and in group 3, roots were filled with bioceramic sealer and cone (Smartpaste bio obturation system). All specimens were tested in a universal testing machine for measuring fracture resistance. For each root, the force at the time of fracture was recorded in Newtons. The statistical analysis was performed by using Kruskal-Wallis and post hoc test. There were no significant differences between the three experimental groups. The fracture values of three experimental and negative control groups were significantly higher than the positive control group. Within the limitations of this study, all materials increased the fracture resistance of instrumented roots.

scholarly journals Evaluation of the Sealing Ability of Three Obturation Techniques Using a Glucose Leakage Test

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Katarzyna Olczak ◽  
Halina Pawlicka
Keyword(s):  
Continuous Wave ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Thermal Methods ◽  
Root Canals ◽  
Anterior Teeth ◽  
Sealing Ability ◽  
Significant Difference

The aim of this study was to evaluate the sealing ability of three different canal filling techniques. Sixty-four roots of extracted human maxillary anterior teeth were prepared using ProTaper® rotary instruments. The specimens were then randomly divided into 3 experimental groups (n=16) and 2 control groups (n=8). The root canals were filled using cold lateral compaction (CLC group), continuous wave condensation technique using the Elements Obturation Unit® (EOU group), and ProTaper obturators (PT group). For the negative control group, 8 roots were filled using lateral compaction as in the CLC group, and the teeth were covered twice with a layer of nail varnish (NCG group). Another 8 roots were filled using lateral compaction, but without sealer, and these were used as the positive control (PCG group). A glucose leakage model was used for quantitative evaluation of microleakage for 24 hours and 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12 weeks. No significant difference in the cumulative amount of leakage was found between the three experimental groups at all observation times. The lateral condensation of cold gutta-percha can guarantee a similar seal of canal fillings as can be achieved by using thermal methods, in the round canals.

scholarly journals A Digital Microscopic Inspection of Dentinal Defects after Using Endodontic Retreatment Files

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Ammar AbuMostafa ◽  
Hala Almoqayyad ◽  
Al-Omari Mohammad
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Material ◽  
Root Canals ◽  
Root Canal Retreatment ◽  
Significant Difference ◽  
Digital Microscope ◽  
Microscopic Inspection

Aim. The study aimed at evaluating the incidence of dentinal defects after root canal retreatment with ProTaper Universal retreatment (PTUR) and XP-endo Shaper and Finisher R (XP). Materials and Methods. Sixty extracted single-rooted human premolars were selected and divided into 4 groups of 15 teeth each. In the negative control group, the teeth were left unprepared. In the positive control group, the teeth were prepared with ProTaper Next and obturated with no further retreatment. In the PTUR and XP groups, the teeth were prepared and obturated followed by removal of the filling material at body temperature using PTUR and XP instruments, respectively. The roots were then sectioned at 3, 6, and 9 mm from the apex and observed under a digital microscope to detect defects. Results. PTUR group showed significantly higher ( p value <0.05) incidence of defects than the other groups. Comparison of no defects versus defects between groups in different areas of root canals demonstrated significant difference among the groups in the apical and cervical regions. Conclusion. Within the limitations of the present study, PTUR files created significantly more dentinal defects than XP files, with most of those defects at the cervical and apical areas of the root canals.

scholarly journals HISTOPATHOLOGICAL STRUCTURE OF WHITE RATS LIVER AFTER GIVING ANT NEST EXTRACT DUE TO INDUCED PARACETAMOL TOXIC DOSE

2019 ◽  
pp. 14
Author(s):  
I Made Merdana ◽  
I Made Kardena ◽  
Ketut Budiasa ◽  
I Made Dodi Gunawan
Keyword(s):  
Rat Liver ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Toxic Dose ◽  
White Rats ◽  
Significant Difference ◽  
Ant Nest ◽  
Histopathologic Changes

This study aim was to determine the influence ant nest plant extract (Myrmecodia pendans) on histopathological changeof white rat liver (Rattus novergicus) due to induced with paracetamol toxic dose. This study used 24 male white rats, divided into four groups, negative control group (P0) given placebo, positive control group (P1) given paracetamol dose 250 mg / kg bw for 10 days, P2 given ant nest extract 250 mg / kg bw and paracetamol dose 250 mg / kg bw for 10 days, P3 given ants nest extract 250 mg / kg bw for seven days, then continued by giving paracetamol and ants nest extract with dose 250 mg / kg bw for ten days. After the treatment done, all the rats were dinecropsed. Liver organs were taken and processed for making histopathology preparations. Parameters examined included hemorrhage, congestion, degeneration and necrosis. The data obtained were analyzed statistically by using Kruskal Wallis test followed by Mann Whitney test. Mann Whitney test results for all categories of histopathologic changes in  hemorrhagic, congestion, degeneration, and necrosis between negative control group (P0) and positive control group (P1) were significantly different (P <0.05), between negative control (P0) with P2 and P3 there was no significant difference (P> 0,05). Afterward, between the positive control (P1) and P2 with P3 there was a significant difference (P <0.05). I can be concludedthat the administration of paracetamol dose 250 mg/kg bw for 10 days affects the histopathologic changes of white rat liver. The administration of ant nest plant extracts can reduce the side effects of toxic doses of paracetamol.

scholarly journals Pengaruh Kitosan Terhadap Jumlah Osteoklas dan Osteoblas Pada Tikus Galur Wistar Model Menopause

2017 ◽  
Vol 1 (2) ◽  
pp. 76-87
Author(s):  
Muhammad Nur
Keyword(s):  
Treatment Group ◽  
Total Sample ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Positive Control Group ◽  
Control Group ◽  
Control Group Design ◽  
White Rats ◽  
Significant Difference

Chitosan is one of the most abundant and dispersed polymers in nature. It has a rapid healing effect for tissues and has an effect on bone remodeling. The purpose of this study was to prove that giving chitosan influenced the decrease of osteoclast number and increasing number of osteoblasts in female mice of wistar strain of ovariectomy menopause model.This study used a posttest only control group design. The total sample of 30 rats divided into three groups was randomized, osteoporosis was made with the menopausal model which was performed ovariectomy in the positive control group and the treatment group then in the treatment group was given chitosan extract of single dose of 45 mg / day via Nasogastric Tube (NGT). K1 was a negative control group (without ovariectomy and without chitosan), K2 was a positive control group (with no chitosan ovariectomy), K3 was the treatment group (ovariectomy and chitosan 45 mg / day).The results showed significant differences in the number of osteoblasts between K1 and K3, K2 with K3, and no significant differences were found in the K1 group with K2. While the number of osteoclasts showed that there were significant differences in K1 group with K2 and no significant difference was found in K1 group with K3, K2 with K3.Conclusions in this study showed that 45 mg / day of chitosan doses could significantly increase osteoblast counts in menopause female white rats and decrease the number of osteoclasts performed by ovariectomy with chitosan administration.

scholarly journals The Effect of Tempeh Gembus Variations to Serum Levels of High Sensitivity C-Reactive Protein (hsCRP) and Serum Levels of Fibrinogen of Sprague Dawley Rats with Aterogenic Diet

2018 ◽  
Vol 25 (1) ◽  
pp. 91-97 ◽  
Author(s):  
Partika Kharunia Dewi ◽  
Diana Nur Afifah ◽  
Ninik Rustanti ◽  
Mohammad Sulchan ◽  
Gemala Anjani
Keyword(s):  
Serum Levels ◽  
Negative Control Group ◽  
Positive Control ◽  
Atherogenic Diet ◽  
Negative Control ◽  
Positive Control Group ◽  
Control Group ◽  
Standard Diet ◽  
Sprague Dawley ◽  
Significant Difference

Abstract Background and aims: Cardiovascular diseases are widespread and causes many deaths in the world. The concentration of acute phase protein: C-reactive protein (CRP) and fibrinogen will rise dramatically when inflammation happens, which that can be used as an early marker of cardiovascular disease risk. Tempeh gembus contains fiber, unsaturated fatty acids and isoflavones are believed to reduce the inflammatory reaction. The aim of the study was to determinate the effect of tempeh gembus variations to levels of hcCRP and levels of fibrinogen of Sprague Dawley rats with atherogenic diet. Material and methods: This study was quasi-experimental with posttest only randomized control group design using 35 Sprague Dawley mice. The rats were randomized into 5 groups: negative control group given the standard diet, the positive control group given standard diet and atherogenic diet, and three treatment groups were given the standard diet, atherogenic diet and variation of tempeh gembus (tempeh gembus, heated tempeh gembus and tempeh gembus with bromelain enzyme) for 28 days. Serum levels of hsCRP and fibrinogen examined using ELISA (Enzyme-linked Immunosorbent Assay). Results and conclusions: The administration of tempeh gembus with bromelain enzyme is the most effective treatment for hsCRP serum level indicated a significant difference (p=0.028) between the negative control group, positive control group and first group with the third group. Fibrinogen serum levels showed significant differences in all treatment groups (p =0.042), administration of tempeh gembus with bromelain enzyme is the most effective treatment is shown by a significant difference between the negative control group and the positive control group with third group. The administration of tempeh gembus with bromelain enzyme for 28 days can reduce the serum levels of hsCRP and fibrinogen on rats significantly.

scholarly journals Potential of Cocoa Extract (Theobroma cacao) in Inhibiting Erythrocyte Damage Induced by Physalia utriculus Venom

2020 ◽  
Vol 6 (3) ◽  
pp. 157
Author(s):  
Adinningtyas Intansari ◽  
Al Munawir ◽  
Laksmi Indreswari
Keyword(s):  
Theobroma Cacao ◽  
Ethanol Extract ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Marine Biota ◽  
Erythrocyte Lysis ◽  
Theobroma Cacao L

Physalia utriculus is one of the invertebrate marine biota that is often found in Indonesia. Some symptoms of venoming due to jellyfish stings cause pain, itching, and hemolysis. In Indonesia, 13 cases of jellyfish stings were reported in 2005-2009 with three people dying in Java, Bali, and Bangka. Cocoa beans (Theobroma cacao L.) contain fat, carbohydrates, proteins, and polyphenol compounds that are useful as antioxidants. Polyphenols in the form of epicathechins, catechins, and procyanidins serve to provide protection to hemolysis. The purpose of this study was to determine the potential of ethanol extract of cacao (Theobroma cacao L.) in inhibiting the damage of erythrocyte induced by Physalia utriculus in vitro. This study used 28 samples of erythrocytes divided into seven groups, namely the normal control group, negative controls, and treatment with cocoa ethanol extract 0.2%, 0.1%, 0.04%, and 0.02%. Each subsequent group induced venom Physalia utriculus. The results showed that the average speed of erythrocyte lysis in the treatment group by giving cocoa ethanol extract 0.2%, 0.1%, 0.04%, and 0.02% respectively (seconds ± standard deviation) was 858,25 ± 94,44; 1.000,5 ± 159,93; 678,5 ± 19,71; and 1.006 ± 159,50. The mean speed of erythrocyte lysis in the negative control group was 1,025 ± 164.63 and the positive control group with the administration of N-Acetylcystein can last up to one hour after administration of venoms. Test for normality and homogeneity shows that data is normally distributed and homogeneous. One Way Annova analysis shows the significance value of p <0.05, then a post hoc analysis test was performed with the Bonferoni method to find out the differences in significance in each group. In this study it can be concluded that the administration of cocoa ethanol extract has no potential to inhibit erythrocyte damage that has been venomed by Physalia utriculus in vitro. Keywords: Physalia utriculus, cacao, erythrocyte damage

Sign in / Sign up

Export Citation Format

Share Document