scholarly journals Effect of sodium bicarbonate residue on some characteristics of processed meat products

2018 ◽  
Vol 6 (2) ◽  
pp. 249-255
Author(s):  
Behrouz Akbari-adergani ◽  
Behrouz Akbari-adergani ◽  
Neda Sallak ◽  
Neda Sallak ◽  
Gholamreza Jahed khaniki ◽  
...  
Keyword(s):  
Sodium Bicarbonate ◽  
Meat Product ◽  
Meat Products ◽  
Quality Characteristics ◽  
Processed Meat ◽  
Ground Meat ◽  
Organoleptic Properties ◽  
Ph Values ◽  
Bicarbonate Ions ◽  
Significant Difference

Using sodium bicarbonate (SB) in cooking meat products is a controversial subject. The aim of this study was to estimate an effect of different SB concentrations on the quality characteristics and organoleptic properties of meat in Kubideh Kebab, an Iranian popular meat product. Ground meat was divided into four groups (a, b, c, and d). After that, SB was added in ratio 0.25, 0.50, 1.00, and 2.00 g/kg respectively. A sample without SB was considered as a blank sample. The Kebab samples were prepared and cooked properly at 350°C for 4–6 minutes and at 450°C for 2–4 minutes. A significant difference was observed in the pH values and the cooking loss between the blank sample and those Kebab samples that were cooked at 350°C and 450°C and pre-treated with SB in the amount of 0.25–2.00 g per 1 kg of meat (P < 0.05). The amount of residual bicarbonate ions increased significantly in the cooked Kebab samples at both treatment temperatures in the a-d group in comparison with the blank sample, as well as between the groups (P = 0.00). The organoleptic properties did not change in the a-d groups in comparison with the blank sample.

scholarly journals Study of Chemical and Organoleptic PropertiesTofu Nugget on Various Percentage In Additionto The Seaweed Porridge (Eucheuma cottoni)

Pro Food ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 859-869
Author(s):  
Nurul Asriani ◽  
Nurhayati . ◽  
Yeni Sulastri
Keyword(s):  
Protein Content ◽  
Water Content ◽  
Meat Product ◽  
Chemical Properties ◽  
Ash Content ◽  
Processed Meat ◽  
Ground Meat ◽  
Organoleptic Properties ◽  
Significance Level ◽  
Study Results

ABSTRACT Nugget is a form/kind of processed meat product made from ground meat with mold foursquare pieces and coated with seasoned flour. This study aims to determine seaweed porridge's effect on the chemical and organoleptic properties of tofu nuggets. The method used in this study was an experimental method by conducting experiments in the Laboratory. The design that used in this study was a Completely Randomized Design (CRD) with one factor treatment, namely the addition of seaweed pulp with 6 treatments in making tofu nuggets, namely P0 = 0% seaweed pulp (as a control), P1 = 10%, P2 = 20 %, P3 = 30%, P4 = 40%, P5 = 50%. The result of the Data from observational analysis using diversity analysis at a 5% significance level. If there is a significantly different treatment, further tests (BNJ) are carried out at the same real level. The study results show that the concentration of the addition of seaweed porridge significantly influences the chemical properties (water content and ash content) and organoleptic properties (color and taste) while for protein content, texture and aroma did not significantly affect. The best treatment was obtained at P5 treatment with water content (54.33%), ash content (6.53%), protein content (5.94%) with savoty taste, brown color, soft texture, and preferred aroma. ABSTRAK Nugget adalah suatu bentuk produk olahan daging yang terbuat dari daging giling yang dicetak dalam bentuk potongan empat persegi dan dilapisi dengan tepung berbumbu. Penelitian ini bertujuan untu mengetahui pengaruh penambahan bubur rumput laut terhadap sifat kimia dan organoleptik nugget tahu. Metode yang digunakan dalam penelitian ini adalah metode eksperimental dengan melakukan percobaan di Laboratorium. Rancangan yang digunakan dalam penelitian ini adalah Rancangan Acak Lengkap (RAL) dengan perlakuan satu faktor yaitu penambahan bubur rumput laut dengan 6 perlakuan dalam pembuatan nugget tahu yaitu P0 = 0 % bubur rumput laut (sebagai control) , P1 = 10 %, P2 = 20 %, P3 = 30 %, P4 = 40 %, P5 = 50 %. Data hasil pengamatan analisa menggunakan analisa keragaman pada taraf nyata 5%. Bila ada perlakuan yang berbeda nyata maka dilakukan uji lanjut (BNJ) pada taraf nyata yang sama. Hasil penelitian menunjukan bahwa konsentrasi penambahan bubur rumput laut berpengaruh secara nyata terhadap sfat kimia (kadar air dan kadar abu) serta sifat organoleptik (warna dan rasa) sedangkan untuk kadar protein, tekstur dan aroma tidak berpengaruh secara nyata. Perlakuan terbaik diperoleh pada perlakuan P5 dengan kadar air (54,33%), kadar abu (6,53%), kadar protein (5,94%) dengan rasa gurih, warna coklat, tekstur lembut dan aroma yang disukai.

Using Histological and Chemical Methods for Detection of Unauthorized Tissues Addition in Emulsion Type Meat Product

2020 ◽  
Keyword(s):  
Vascular Tissue ◽  
Meat Product ◽  
Calcium Content ◽  
Processed Meat ◽  
Low Protein ◽  
Significant Difference ◽  
Different Types ◽  
Plant Stem ◽  
High Level ◽  
Reliable Methods

Total twenty different processed meat plant producing emulsion type sausage were histologically and chemically examined for detection of adulteration with unauthorized tissues. Results revealed that samples were adulterated with different types of animal tissues included; hyaline cartilage, tendon, spongy bone, peripheral nerve trunk, basophilic matrix, lymphatic tissue, fascia, fibrocartilage and vascular tissue. Moreover, these samples were adulterated Also, adulterated with plant tissue included; plant stem, leaves and root. Chemical analysis showed a significant difference in their chemical composition (moisture, fat, protein, ash and calcium) content. Moisture and fat content varied around the permissible limit of E.S.S. while low protein, high ash and calcium content was detected in the examined samples. Therefore, Histological and chemical examinations can be used as reliable methods to detect adultration using unauthorized addition of both animal and plant tissues in processed meat product samples which revealed a high level of falsification.

scholarly journals The Effect of the Addition of Fiber Preparations on the Color of Medium-Grounded Pasteurized and Sterilized Model Canned Meat Products

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2247
Author(s):  
Mirosław Słowiński ◽  
Joanna Miazek ◽  
Krzysztof Dasiewicz ◽  
Marta Chmiel
Keyword(s):  
Meat Product ◽  
Meat Products ◽  
Quality Characteristics ◽  
Consumer Acceptance ◽  
Meat Industry ◽  
Industrial Practice ◽  
Yellow Color ◽  
Hue Angle ◽  
Canned Meat ◽  
Color Components

A beneficial aspect of the use of fiber preparations in the meat industry is the improvement of some quality characteristics of meat products. However, the preparation added in the amount of 3 or 6% may affect their color. The effect of the addition of barley, wheat and oat fiber preparations with different fiber lengths, in quantities allowing the product to be indicated as “high in fiber” or “source of fiber”, to pasteurized or sterilized medium-grounded canned meat products on their color, was determined. In the obtained canned meat products, the basic chemical composition and the L*, a* and b*, C* (Chroma) and h* (hue angle) color components were determined. The addition of the barley fiber preparation BG 300 to the model canned meat products caused a significant (p ≤ 0.05) darkening and an increase in the proportion of yellow color. In an industrial practice, this may result in poorer consumer acceptance of the meat product. Fiber length of wheat and barley fiber had no effect on the color components of products. The 6% addition of the wheat fiber preparations WF 200R and WF 600R or the oat fiber preparations HF 200 and HF 600 caused an apparent lightening of their color (ΔE > 2) compared to the control products.

scholarly journals Review on Pathogenic Bacteria Listeria monocytogenes, The Detection and The Sequencing Gene Methods Isolated from Meat Products

2019 ◽  
Vol 6 (2) ◽  
Author(s):  
Bhakti Etza Setiani ◽  
Yoyok Budi Pramono ◽  
Lutfi Purwitasari
Keyword(s):  
Listeria Monocytogenes ◽  
Pathogenic Bacteria ◽  
Meat Product ◽  
Meat Products ◽  
Processed Meat ◽  
Confirmation Test ◽  
Optimum Ph ◽  
Bacterium Species ◽  
Genotypic Identification ◽  
Ph Range

A study was conducted to review on pathogenic bacteria Listeria monocytogenes, the detection and the sequencing gene methods isolated from meat products, compare selected methods that detect the presence of Listeria monocytogenes in selected raw and processed meat products. Results indicate that Listeria monocytogenenes (originally named Bacterium monocytogenes) is a gram-positive, non-sporeforming, highly mobile, rod-type, and facultative anaerobic bacterium species. It can grow under temperatures between -1.5°C to 45°C and at pH range between 4.4 and 9.4, with the optimum pH of 7. Rapid methods (PCR based and VIDAS-LDUO®) detected Listeria monocytogenes faster than the conventional method. It was also gathered that Phenotypic identification and Genotypic identification are two types of confirmation test for Listeria monocytogenes. Listeria monocytogenenes can be found in raw meat and meat product because of environmental contamination, cross contamination or error process.

Effects of irradiation source and dose level on quality characteristics of processed meat products

2017 ◽  
Vol 130 ◽  
pp. 259-264 ◽  
Author(s):  
Youn-Kyung Ham ◽  
Hyun-Wook Kim ◽  
Ko-Eun Hwang ◽  
Dong-Heon Song ◽  
Yong-Jae Kim ◽  
...  
Keyword(s):  
Dose Level ◽  
Meat Products ◽  
Quality Characteristics ◽  
Processed Meat

CONTROL OF CLOSTRIDIUM BOTULINUM AND STAPHYLOCOCCUS AUREUS IN SEMI-PRESERVED MEAT PRODUCTS

1972 ◽  
Vol 35 (9) ◽  
pp. 514-523 ◽  
Author(s):  
Han's Riemann ◽  
W. H. Lee ◽  
C. Genigeorgis
Keyword(s):  
Staphylococcus Aureus ◽  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
Clostridium Botulinum ◽  
Meat Product ◽  
Meat Products ◽  
Rapid Decline ◽  
Ph Values ◽  
And Staphylococcus Aureus ◽  
Brine Concentration

Clostridium botulinum and Staphylococcus aureus are naturally occurring contaminants in semi-preserved meat products. They can be inhibited by (a) storage below 3 C, (b) 10% sodium chloride (brine concentration), (c) pH values below 4.5, or (d) proper combinations of these factors. However, most meat products do not have the pH values and brine concentrations required to completely inhibit C. botulinum and S. aureus and there is always a risk of temperature abuse. Improved safety can be achieved by adding 1% or more glucose to the product. The glucose will, in the event of temperature abuse, generally be fermented to lactic acid by the indigenous microflora in the product. As a result, the pH value drops to a level at which the brine concentration is sufficient to inhibit C. botulinum and S. aureus. A better approach to safety is to add, together with glucose, a radiation-killed preparation of lactic acid bacteria, e.g., Pediococcus cerevisiae. Such preparations cause a rapid decline in pH only when the product is exposed to a high temperature, and they are stable during storage of meat products. Addition of irradiated lactic acid bacteria to meat products has not yet been officially approved. Another way to improve the safety of semi-preserved meat is to add sufficient glucono-delta-lactone to reduce the initial pH of the product to a level at which the salt concentration is inhibitory. Use of larger amounts of glucono-delta-lactone may result in flavor and color problems even when the meat product is kept at refrigeration temperatures.

Proposed Technique for the Determination of Both Moisture and Fat in the Same Sample of Meat or Meat Product

1972 ◽  
Vol 55 (3) ◽  
pp. 578-580
Author(s):  
Edward H Cohen ◽  
Charles P Kimmelman
Keyword(s):  
Moisture Content ◽  
Boiling Point ◽  
Meat Product ◽  
Meat Products ◽  
Ground Meat ◽  
Pork Sausage ◽  
Selective Solvents ◽  
Time Period ◽  
Oil Residue

Abstract The moisture content of ground meat, processed frankfurters, and uncooked pork sausage mixtures was determined within a 15-30 min time period and with a minimum of 95% recovery of moisture. Selective solvents, such as octane, nonane, toluene, xylene, ethylbenzene, and cumenc were evaluated. After removal of the moisture, the residue in the flask was sampled for the fat content . A 20 ml aliquot of the cooled total solution was removed, transferred to a tared vessel, and evaporated at its boiling point under a stream of nitrogen. The oil residue was weighed and calculated as percent fat. Recoveries of fat ranged from 95 to 100% for all solvents and meat products tested except for the uncooked pork sausage mixture. The latter product yielded 80–91% recovery of fat for all solvents. To obtain a 95–100% recovery from the uncooked pork sausage mixture required an additional 15–30 min digestion. The tim e required for fat determinations was from 15–30 min, depending upon the boiling point of the solvent.

Artificial meat and the future of the meat industry

2017 ◽  
Vol 57 (11) ◽  
pp. 2216 ◽  
Author(s):  
Sarah P. F. Bonny ◽  
Graham E. Gardner ◽  
David W. Pethick ◽  
Jean-François Hocquette
Keyword(s):  
New Technologies ◽  
Meat Products ◽  
Farming Systems ◽  
Processed Meat ◽  
Low Grade ◽  
Meat Industry ◽  
Ground Meat ◽  
Market Place ◽  
The Future

The global population is estimated to plateau at 9 billion by the year 2050; however, projected food-production estimates would supply for only 8 billion people, using the ‘business as usual’ approach. In particular, the meat industry would need to increase production by ~50–73%. In response, there are several different options that have the potential to satisfy demand and increase production. Some of these options require advanced technologies and many may be considered as ‘artificial’ by different consumer groups. Within the meat industry itself, available technologies include selective breeding, agroecology systems, animal cloning and genetic modification. Alternatively, meat proteins can be replaced or substituted with proteins from plants, fungi, algae or insects. Finally, meat products could be produced using in vitro culturing and three-dimensional printing techniques. The protein produced by these techniques can be considered in the following three categories: modified livestock systems, synthetic meat systems, and meat substitutes. In the future, it is likely that meat substitutes will increase market share through competition with low-grade cuts of meat, sausages, ground meat and processed meat. However, synthetic meat systems and meat substitutes have significant barriers to commercialisation and widespread adoption that will affect their presence at least in the high-end premium sector in the market. To meet growing demands for protein, and in the face of growing competition from other sectors, the conventional meat industry must adopt new technologies and farming systems. These must be tailored to the challenges facing the industry and must effectively respond to consumer demands and the changing market place.

scholarly journals Studi Tentang Preferensi Konsumen, Sifat Fisiko Kimia dan Nilai Organoleptik Sei Daging Babi asal Kupang (Nusa Tenggara Timur)

2017 ◽  
Vol 10 (1) ◽  
pp. 23
Author(s):  
Soffy Soetji Widarti ◽  
Hari Purnomo ◽  
Djalal Rosyidi
Keyword(s):  
Protein Content ◽  
Meat Product ◽  
Consumer Preference ◽  
Organoleptic Properties ◽  
Randomized Design ◽  
Physico Chemical ◽  
Significant Difference ◽  
Effectivity Index ◽  
Completely Randomized Design ◽  
Carbohydrate Contents

<p class="p1">Pork sei is a meat product from Kupang (East Nusa Tenggara) that produced traditionally using curing and smoking methods. The purpose of this study was to observe consumer preference, physico-chemical and organoleptic properties of pork sei which is currently very popular in East Nusa <span class="s1">Tenggara. </span>The research was carried out by the method of observation and experiment using Completely Randomized Design with three replications. <span class="s1">The observations were carried out on four </span>restaurants and pork sei consumer in Kupang. Variables measured were moisture, protein, fat and carbohydrate contents, pH, and organoleptic test including color, texture, taste and tenderness. The results showed that there was no significant difference among pork sei originated from the four selected restaurants on fat content, carbohydrate content, pH, texture and tenderness. However, the protein content, taste and color were different significantly (P &lt; 0.05). <span class="s2">Based on the effectivity index </span>analysis, it can be concluded that the best samples was originated from restaurant A.</p>

scholarly journals REAL TIME POLYMERASE CHAIN REACTION (RT-PCR) FOR DNA PIG CONTAMINATION IDENTIFICATION SAUSAGE IN SIX DISTRICT PANDEGLANG BANTEN

2021 ◽  
Vol 1 (1) ◽  
pp. 81-88
Author(s):  
Hadi Susilo
Keyword(s):  
Polymerase Chain Reaction ◽  
Real Time ◽  
Meat Product ◽  
Meat Products ◽  
Pcr Analysis ◽  
Processed Meat ◽  
Rt Pcr ◽  
Chain Reaction ◽  
Dna Purity ◽  
Polymerase Chain

Sausage is a meat product processed that is popular food especially in Pandeglang, Banten Province. The importance of halal certificates or the existence of the MUI (Indonesian Ulama Council) halal logo for processed meat products makes Muslim people confident to consume them. The aim this research was to identify pig DNA contamination in sausage products in six  districts in Pandeglang without the MUI halal labels using RT-PCR (Real Time-Polymerase Chain Reaction). RT PCR that can calculate to pig to fill these sample free from pig contamination. This research was divided into two stage, the first stage is extracted or carried out DNA and the second stage is RT PCR analysis. The results of the DNA purity test on sausage samples had DNA purity values ​​of 1.84-1.9 (A260 / A280) and resulted in sample concentrations ranging from 37.8 to 102.5 ng / µl.  The only amplification on the FAM curve was in the positive control pig.  the Cq value ranges from 30 - 31.29. The results of RT PCR on sausage samples in the district area in Pandeglang Banten did not detect the presence of pig DNA.

Sign in / Sign up

Export Citation Format

Share Document