Autonomous Pathogen Detection System (APDS) NYC Spring 2005 Field Test Report May to July 2005

2005 ◽  
Author(s):  
J M Dzenitis ◽  
A J Makarewicz ◽  
D R Hadley ◽  
D M Gutierrez ◽  
T R Metz ◽  
...  
2000 ◽  
Author(s):  
Scott MacBeth ◽  
Johnnie Jernigan ◽  
Jackie Grody ◽  
Donald L. Thomas ◽  
Michael E. Clark

2018 ◽  
Vol 101 (5) ◽  
pp. 1584-1592
Author(s):  
Kakolie Banerjee ◽  
Brittney Pierson ◽  
Chuxuan Hu ◽  
Elijah Carrier ◽  
Lauren Malsick ◽  
...  

Abstract Background: Listeria spp. are an important foodborne human pathogen because of their ability to cause disease and high mortality in individuals, particularly pregnant women, neonates, the elderly, immunocompromised individuals, and children. The Sample6 DETECTTM HT/L Kit is a semi-automated qualitative pathogen detection system designed to detect Listeria spp. (L. monocytogenes, L. innocua, L. ivanovii, L. seeligeri, L. welshimeri, and L. marthii) in environmental samples using the Sample6 BioIlluminationTM technology. Objective: The study was done to evaluate the Sample6 DETECT HT/L Kit. The assay was evaluated for inclusivity, exclusivity, robustness, product consistency, and stability, and a matrix study of one environmental surface. Methods: The performance of the Sample6 DETECT HT/L was compared with U.S. Food and Drug Administration reference culture method for Listeria using an unpaired study design. Results: The Sample6 DETECT HT/L assay correctly identified all 50 inclusivity isolates and correctly excluded all 30 nontarget strains evaluated. The assay was not affected by minor variations in incubation temperature and time, or sample volume. Results across three production lots spanning the shelf life of the assay were consistent. In the matrix study, the Sample6 DETECT HT/L for Listeria correctly identified each test portion for the presence or absence of Listeria, and there were no statistically significant differences between candidate and reference method results. Conclusions: The data collected in this study demonstrate that the Sample6 DETECT HT/L assay is a reliable method for the detection of Listeria spp. on stainless-steel environmental surfaces after 22 h of enrichment.


1988 ◽  
Author(s):  
Chung-yee Leung ◽  
Cheng-hac Huang ◽  
I-fan Chang

Author(s):  
Daniel Sampaio da Silva ◽  
Si´lvio A. Melo Filho ◽  
Mauro Niehues de Farias ◽  
Anderson Pacheco

The OLAPA pipeline (Oleoduto Arauca´ria–Paranagua´) is a 12in diameter pipeline and, with its 97,6 km in length, crosses a mountain region called “Serra do Mar” attaining elevations of about 900m in a dense forest region. Besides that, this pipeline crosses cities, farms, rivers, including a short submerse stretch in the Paranagua´’s bay. An incident in this pipeline could result in severe consequences, especially under the environmental point of view. Therefore, this pipeline was chosen to test the performance of a new leak detector system in Transpetro. The test consists in comparing the theoretical results with practical values of alarm times obtained from a controlled removal of product in an adequate point, in the middle of the pipeline, simulating a real leak. The system chosen to be tested was the LeakWarn system, which is a computational system that uses the mass balance principle with line pack change to analyze the pipeline operational parameters in order to alert when there is a risk of product leak. This test had the objective to evaluate the LDS and help Transpetro’s management team to analyze and decide whether or not to replace its current leak management system, since this new one showed the expected results and was compatible with the excellence level already achieved in the company. The field test was performed in July 7th 2009, through a vent valve far from the ends of the pipeline and it was made in three different conditions: 1) A big leak in the steady state of operation; 2) A small leak also in the steady state of operation; and 3) A big leak in the transient state of operation (immediately after the pump station start up). In order to proceed this test, a multidisciplinary team was assigned and several resources were used such as: Two tank trucks, a specially designed leakage line with control valves, measuring system, flexible hoses, communication systems and emergency equipments. The complete operation was monitored from the Control Center in Transpetro’s Headquarter, Rio de Janeiro. This paper describes the way the tests were performed and presents the results in order to contribute with useful information to be used in any field test for any other leak detection system. It shows how planning were done in order to insure that all operations would be performed according to strict procedures and in a safe way. It also describes the milestones and the work of each team involved in the activity, as well as their constraints and difficulties that had to be overcome during the planning and execution phases, that lasted approximately one year.


2020 ◽  
Vol 152 ◽  
pp. 112007 ◽  
Author(s):  
Won-Il Lee ◽  
Younghyeon Park ◽  
Sajal Shrivastava ◽  
Taekeon Jung ◽  
Montri Meeseepong ◽  
...  

Author(s):  
F. P. Milanovich ◽  
J. Dzenitis ◽  
B. J. Hindson ◽  
A. J. Makarewicz ◽  
M. T. McBride ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document