Study of Flow Field, Power and Mixing Time in a Two-Phase Stirred Vessel with Dual Rushton Impellers: Experimental Observation and CFD Simulation

2009 ◽  
Vol 4 (1) ◽  
Author(s):  
Ramin Zadghaffari ◽  
Jafarsadegh Moghaddas ◽  
Johan Revstedt
Keyword(s):  
Flow Field ◽  
Cfd Simulation ◽  
Two Phase Flow ◽  
Mixing Time ◽  
Phase Flow ◽  
Two Phase ◽  
Stirred Vessel ◽  
Image Velocimetry ◽  
Planar Laser ◽  
Computational Fluid Dynamics Cfd

An agitated two-phase flow is studied numerically and experimentally in a mixing vessel agitated with two six-blade Rushton turbines. In Computational Fluid Dynamics (CFD), the full Eulerian multiphase approach coupled with the standard turbulence model is performed to deal with two-phase flow. The impeller rotation was modelled by the Multiple Reference Frame (MRF) approach. The simulation was used to investigate the flow field, power and mixing time in single and two-phase cases. The results of the calculations have been verified with the data that was measured by particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) technique. The predicted results show good agreement with the experimental data. The computational model presented in this study could be useful for explaining the two-phase flow patterns on the mixing process and extending the applications of multiphase stirred reactors.

UDV measurements and CFD simulation of two-phase flow in a stirred vessel

2009 ◽  
Vol 9 (6/7) ◽  
pp. 375
Author(s):  
Sanna Haavisto ◽  
Jouni Syrjanen ◽  
Antti Koponen ◽  
Mikko Manninen
Keyword(s):  
Cfd Simulation ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Stirred Vessel

Research Analysis and Experiment Study on Flow Field of Hydrodynamic Coupling

2011 ◽  
Vol 418-420 ◽  
pp. 2006-2011
Author(s):  
Rui Zhang ◽  
Cheng Jian Sun ◽  
Yue Wang
Keyword(s):  
Flow Field ◽  
Cfd Simulation ◽  
Two Phase Flow ◽  
Three Dimensional ◽  
Internal Flow ◽  
Phase Flow ◽  
Complex Flow ◽  
Two Phase ◽  
Operation Conditions ◽  
Hydrodynamic Coupling

CFD simulation and PIV test technology provide effective solution for revealing the complex flow of hydrodynamic coupling’s internal flow field. Some articles reported that the combination of CFD simulation and PIV test can be used for analyzing the internal flow field of coupling, and such analysis focuses on one-phase flow. However, most internal flow field of coupling are gas-fluid two-phase flow under the real operation conditions. In order to reflect the gas-fluid two-phase flow of coupling objectively, CFD three-dimensional numerical simulation is conducted under two typical operation conditions. In addition, modern two-dimensional PIV technology is used to test the two-phase flow. This method of combining experiments and simulation presents the characteristics of the flow field when charging ratios are different.

CFD Simulation of Two-Phase Flow in a Downhole Venturi Meter

2011 ◽  
Vol 130-134 ◽  
pp. 3644-3647
Author(s):  
Ding Feng ◽  
Si Huang ◽  
Yu Hui Guan ◽  
Wei Guo Ma
Keyword(s):  
Optimal Design ◽  
Pressure Drop ◽  
Flow Field ◽  
Cfd Simulation ◽  
Two Phase Flow ◽  
Flow Simulation ◽  
Phase Flow ◽  
Feed Flow Rate ◽  
Two Phase ◽  
Oil Water

This work performs an oil-water two-phase flow simulation in a downhole Venturi meter to investigate the flow field and pressure characteristics with different flow and oil-water ratios. The relation between the pressure drop and the feed flow rate in the flowmeter is investigated for its optimal design.

The Study of Water-Sediment Two Phase Flow Field Measurement Based on Particle Image Velocimetry

2013 ◽  
Vol 368-370 ◽  
pp. 302-310
Author(s):  
Bo Chen
Keyword(s):  
Flow Field ◽  
Two Phase Flow ◽  
Internal Flow ◽  
Glass Particle ◽  
Glass Beads ◽  
Light Transmittance ◽  
Phase Flow ◽  
Two Phase ◽  
Image Velocimetry ◽  
Better Than

Internal flow field of water-sediment two phase flow was hardly observed by PIV system, due to poor light transmittance. To improve this situation, the glass particle was used in experiment instead of sediment particle. According to the experiment results, the light transmittance of the mixture of glass beads and water was better than the mixture of sediment and water; so the relatively clear internal image of the two-phase flow could be obtained by PIV system. According to the experiment, the glass beads movement was similar to sediment in water.

Status of Advanced Two-Phase Flow Model Development for SRM Chamber Flow Field and Combustion Modeling

2004 ◽  
Author(s):  
Gary Luke ◽  
Mark Eagar ◽  
Michael Sears ◽  
Scott Felt ◽  
Bob Prozan
Keyword(s):  
Flow Field ◽  
Flow Model ◽  
Two Phase Flow ◽  
Model Development ◽  
Phase Flow ◽  
Two Phase ◽  
Combustion Modeling

Two-Phase Flow Field Numerical Simulation in Scrubber for Exhaust Gas Desulfurization

2014 ◽  
Vol 541-542 ◽  
pp. 1288-1291
Author(s):  
Zhi Feng Dong ◽  
Quan Jin Kuang ◽  
Yong Zheng Gu ◽  
Rong Yao ◽  
Hong Wei Wang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Flue Gas ◽  
Two Phase Flow ◽  
Three Dimensional ◽  
Flue Gas Desulfurization ◽  
Parameter Design ◽  
Phase Flow ◽  
Two Phase ◽  
Entrance Angle

Calculation fluid dynamics software Fluent was used to conduct three-dimensional numerical simulation on gas-liquid two-phase flow field in a wet flue gas desulfurization scrubber. The k-ε model and SIMPLE computing were adopted in the analysis. The numerical simulation results show that the different gas entrance angles lead to internal changes of gas-liquid two-phase flow field, which provides references for reasonable parameter design of entrance angle in the scrubber.

Comparison of four types of membrane bioreactor systems in terms of shear stress over the membrane surface using computational fluid dynamics

2013 ◽  
Vol 68 (12) ◽  
pp. 2534-2544 ◽  
Author(s):  
N. Ratkovich ◽  
T. R. Bentzen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Membrane Fouling ◽  
Two Phase Flow ◽  
Membrane Surface ◽  
Cross Flow ◽  
Membrane Bioreactors ◽  
Phase Flow ◽  
Two Phase ◽  
Computational Fluid Dynamics Cfd

Membrane bioreactors (MBRs) have been used successfully in biological wastewater treatment to solve the perennial problem of effective solids–liquid separation. A common problem with MBR systems is clogging of the modules and fouling of the membrane, resulting in frequent cleaning and replacement, which makes the system less appealing for full-scale applications. It has been widely demonstrated that the filtration performances in MBRs can be greatly improved with a two-phase flow (sludge–air) or higher liquid cross-flow velocities. However, the optimization process of these systems is complex and requires knowledge of the membrane fouling, hydrodynamics and biokinetics. Modern tools such as computational fluid dynamics (CFD) can be used to diagnose and understand the two-phase flow in an MBR. Four cases of different MBR configurations are presented in this work, using CFD as a tool to develop and optimize these systems.

Sign in / Sign up

Export Citation Format

Share Document