Raw-Material Availability and the Organization of Technology

1994 ◽  
Vol 59 (1) ◽  
pp. 21-34 ◽  
Author(s):  
William Andrefsky
Keyword(s):  
Production Technology ◽  
Raw Materials ◽  
Poor Quality ◽  
Important Variable ◽  
Raw Material ◽  
Stone Tool ◽  
High Quality ◽  
Formal Tool ◽  
Lithic Raw Materials ◽  
Tool Types

Ethnographic examples of stone-tool makers in Australia and archaeological examples from three different areas in the western United States indicate that the availability of lithic raw materials is an important variable conditioning stone-tool production technology. Attributes of availability such as abundance and quality of lithic raw materials condition the production of formal- vs. informal-tool types. Poor-quality raw materials tend to be manufactured into informal-tool designs. High-quality lithic raw materials tend to be manufactured into formal-tool designs when such materials occur in low abundance. When high-quality materials occur in great abundance both formal- and informal-tool designs are manufactured. Other factors, such as residential mobility or sedentism, are found to be less-important determinates of lithic-production technology.

Energetic Efficiency and Lithic Technology: An Upper Mississippian Example

1992 ◽  
Vol 57 (3) ◽  
pp. 467-481 ◽  
Author(s):  
Robert J. Jeske
Keyword(s):  
Lithic Technology ◽  
Optimal Foraging Theory ◽  
Poor Quality ◽  
Raw Material ◽  
Stone Tool ◽  
Energy Budgets ◽  
Energetic Efficiency ◽  
Human Populations ◽  
Projectile Points ◽  
Formal Tool

Optimal-foraging theory and the concept of energetic efficiency have been used in archaeology for over a decade, usually to explore subsistence behavior. People, however, made choices for energy expenditure in other areas of culture, including lithic technology. It is suggested that a shift in the allocation of energy as an adaptive response to changes in social organization caused the widely noted decline in formal tool types and stone-tool refinement in the late prehistoric periods in eastern North America. Data from an Upper Mississippian village are used to demonstrate the economic use of poor-quality lithic raw material. A bipolar technique was used to produce flake blanks for triangular projectile points as well as a peculiar but common Upper Mississippian tool, the humpback biface. It is suggested that bipolar reduction and other lithic efficiency and economizing strategies are indicators of stress on the energy budgets of human populations.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

scholarly journals Preliminary Archaeopetrological Study of the Lithic Industry From the l’Hort de la Boquera Rock Shelter (Margalef de Montsant, Tarragona, Spain): Applying Mineralogical and Geochemical Techniques

2018 ◽  
Vol 56 ◽  
pp. 23-33
Author(s):  
Mar Rey-Solé ◽  
Maria Pilar García-Argüelles ◽  
Jordi Nadal ◽  
Xavier Mangado ◽  
Anders Scherstén ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Raw Materials ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Study Results ◽  
Lithic Industry ◽  
Plasma Mass Spectrometry

The l’Hort de la Boquera site is located in the northeastern part of Iberia and its stone tool assemblage includes up to 25,000 flint artefacts. This is the first approach to the analysis of the raw material through an archaeopetrological study. Results were obtained by use of mineralogi¬cal techniques: macroscopic and petrographic analysis, Scanning Electronic Microscopy (SEM), Micro-Raman and X-Ray diffraction (XRD); additionally, Laser Ablation Inductively Coupled Plasma Mass Spectrometry was applied. It has been possible to discriminate at least four flint categories, the ‘Evaporitic flint type’ (with two local subvarieties – ‘Common evaporitic’ and ‘Garnet’ varieties) that comes from local outcrops of the Ulldemolins Complex, and two flint types that had their origin further afield: the ‘Charophyta flint type’ (coming from the Torrente de Cinca Unit) and the ‘Dark flint type’ (from the La Serra Llarga Formation).These results make this study the most comprehensive analysis of raw materials that has been carried out in the area so far

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

scholarly journals Procurement and mobility during the Late Pleistocene: Characterising the stone-tool assemblage of the Picamoixons site (Tarragona, NE Iberian Peninsula)

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
María Soto
Keyword(s):  
Iberian Peninsula ◽  
Late Pleistocene ◽  
Raw Materials ◽  
Management Strategies ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
Hunter Gatherers ◽  
Definition Of ◽  
Ne Iberian Peninsula

The Picamoixons site is a rockshelter located in the province of Tarragona (NE Iberian Peninsula). It was object of two rescue campaigns during 1988 and 1993, which led to the recovery of a complete archaeological assemblage, including stone tools as well as faunal and portable art remains that date the occupation to the 14th to 11th millennium BP (calibrated). This study involves a petrographic characterisation of the stone-tool assemblage in order to establish: 1) the procurement areas, 2) the raw materials management strategies and 3) the mobility radius and territorial sizes of the hunter-gatherers groups that occupied the site. The method applied comprises in a multiscale analysis that includes systematic prospection, the petrographic characterisation of geological and archaeological samples, an analysis of the chert types represented in the knapping sequence, and the definition of the mobility axes and areas frequented according to lithic procurement.A petrographic analysis of the chert in the prospected area led to the definition of nine macroscopic varieties related to five types (Vilaplana, Morera, Maset, Vilella and Tossa cherts), related to Lower and Upper Muschelkalk (Triassic), Lutetian, Bartonian (Palaeocene) and Sannonian (Oligocene) deposits.The study of the knapping sequences indicates the main exploitation of Bartonian cherts (Tossa type), and the use of Lutetian cherts (Maset and Morera types) for configuring retouched tools. The exploitation of the remaining raw material types identified is considered sporadic and opportunistic.Defining the procurement areas enabled the mobility radius to be assessed as between 3 and 30 km, highlighting the importance of the fluvial basins as natural movement pathways. The results indicate that the main procurement territory was 16 km2 in area, associable with a forager radius. The most remote procurement distances suggest a maximum exploitation area of 260 km2, defining an intra-regional range. This range presents parallelisms with various contemporaneous hunter-gatherers groups in Western Europe, suggesting a progressive mobility reduction dynamic during the Late Pleistocene-Initial Holocene.

CARBON AND FUEL FROM RUBBER WASTE

2020 ◽  
pp. 103-108
Author(s):  
Gennadi I. Zhuravsky ◽  
Maksim I. Nitievski
Keyword(s):  
Zinc Oxide ◽  
Water Vapor ◽  
Raw Materials ◽  
Liquid Waste ◽  
Raw Material ◽  
High Grade ◽  
High Quality ◽  
Technical Carbon ◽  
Rubber Waste ◽  
Composite Mixture

The results of studies of thermolysis waste in the environment of overheated water vapor are presented. It is shown that as a result of fractionation from liquid waste thermolysis products, gasoline and diesel fuel fractions can be obtained. It is proposed to use a composite mixture of liquid and solid waste thermolysis products as raw materials for high-grade technical carbon. Studies have shown that high-grade technical carbon can be obtained as raw materials using a composite mixture of rubber waste thermolysis products as raw materials. The technological line of obtaining technical carbon from the products of thermolysis of worn tires is described. Analysis of the ash produced by the process of burning the composite mixture shows that it contains compounds of iron, zinc and silicon. Therefore, this ash is of interest as a high-quality raw material for the production of zinc oxide, as one of the main ingredients of rubber mixtures.

POTENSI PENGEMBANGAN PLASTIK BIODEGRADABLE BERBASIS PATI SAGU DAN UBIKAYU DI INDONESIA / The Development Potential of Sago and Cassava Starch-Based Biodegradable Plastic in Indonesia

2017 ◽  
Vol 36 (2) ◽  
pp. 67
Author(s):  
Elmi Kamsiati ◽  
Heny Herawati ◽  
Endang Yuli Purwani
Keyword(s):  
Production Technology ◽  
Raw Materials ◽  
Environmentally Friendly ◽  
Biodegradable Plastics ◽  
Cassava Starch ◽  
Packaging Material ◽  
Biodegradable Plastic ◽  
Raw Material ◽  
Main Ingredient ◽  
Production Stages

<p>Plastic is a packaging materials that are widely used but has an adverse impact on the environment because it is difficult to degrade in nature. Production technology of biodegradable plastics from natural resources that have characteristic environmentally friendly has developed. Starch-based biodegradable plastic is a widely developed type because the production process is simple and the raw materials more readily available. The starch of cassava and sago has potential as a raw material of biodegradable plastic because of the availability and its characteristic. Also, to make starch as the main ingredient, plasticizers and structural strengthening materials are required to produce biodegradable plastic with excellent characteristics. The production stages of biodegradable plastics include mixing, heating, and casting. The starch-based biodegradable plastic that can apply to an environmentally friendly packaging material has an excellent opportunity developed in Indonesia.</p><p>Keywords: Starch, sago, cassava, biodegradable plastics, production technology</p><p> </p><p><strong>Abstrak</strong></p><p>Plastik merupakan bahan pengemas yang banyak digunakan namun berdampak buruk bagi lingkungan karena sulit terdegradasi di alam. Teknologi produksi plastik biodegradable atau bioplastik yang dibuat dari bahan alami dan ramah lingkungan sudah mulai dikembangkan. Plastik biodegradable berbahan dasar pati relatif lebih mudah diproduksi dan bahan baku mudah diperoleh. Pati ubi kayu dan sagu memiliki potensi sebagai bahan baku plastik biodegradable ditinjau dari ketersediaan dan karakteristiknya. Selain pati sebagai bahan utama, diperlukan pula plastisizer atau bahan pemlastis dan bahan penguat struktur untuk menghasilkan plastik biodegradable dengan karakteristik yang baik. Tahapan produksinya meliputi pencampuran, pemanasan, dan pencetakan. Plastik biodegradable berbahan dasar pati dapat digunakan sebagai bahan pengemas yang ramah lingkungan dan berpeluang besar dikembangkan.</p><p>Kata kunci: Pati, sagu, ubi kayu, bioplastik, teknologi produksi</p>

scholarly journals Turonian flint economy in the easternmost Magdalenian: new data from Stare Baraki, site 1 (eastern Poland)

2020 ◽  
Vol 12 (12) ◽  
Author(s):  
Tadeusz Wiśniewski ◽  
Maciej T. Krajcarz ◽  
Karol Standzikowski
Keyword(s):  
Raw Materials ◽  
Included Study ◽  
Raw Material ◽  
The West ◽  
Eastern Area ◽  
Vistula River ◽  
Archaeological Materials ◽  
Lithic Raw Materials ◽  
The Right ◽  
Almost All

AbstractMagdalenian communities exploited mostly local and regional good-quality lithic raw materials. In south-eastern Poland, being the easternmost fringe of the Magdalenian range, Turonian grey flint had a particular importance. Outcrops of this raw material occur both at the west and at the east sides the Vistula River Gorge. The varieties from the eastern area (called here “eastern Turonian flint” or ETF) are common among inventories of the Magdalenian sites situated to west of the Vistula river. This fact points toward the frequent penetration of the ETF outcrop area by those societies. However, no Magdalenian sites were known directly from the ETF deposit area, and this gap in knowledge restricted further understanding of the character and diversity of Magdalenian activity there. Therefore, in this paper, we present the results of searching for Magdalenian sites within the ETF outcrop zone. Applied methodology included study of the archive archaeological materials, followed by detail survey and excavation of the selected site—Stare Baraki 1. This site documents a short stay or multiple stays of Magdalenian people, who were focused on Turonian flint knapping. Lithic inventory records collecting of several local flint varieties at the distance up to around 20 km from the site, followed by almost all stages of flint working. The material from Stare Baraki is the first known and currently the only trace of the Magdalenian people inside the zone of Turonian flint deposits on the right bank of the Vistula river. The study in Stare Baraki delivered new data for the reconstruction of territory exploitation strategies used in the easternmost Magdalenian.

scholarly journals Raw material optimization and stone tool engineering in the Early Stone Age of Olduvai Gorge (Tanzania)

2020 ◽  
Vol 17 (162) ◽  
pp. 20190377 ◽  
Author(s):  
Alastair Key ◽  
Tomos Proffitt ◽  
Ignacio de la Torre
Keyword(s):  
Functional Performance ◽  
Material Selection ◽  
Raw Materials ◽  
Cutting Tools ◽  
Raw Material ◽  
Stone Tool ◽  
Olduvai Gorge ◽  
Stone Age ◽  
Material Optimization ◽  
Early Stone Age

For more than 1.8 million years hominins at Olduvai Gorge were faced with a choice: whether to use lavas, quartzite or chert to produce stone tools. All are available locally and all are suitable for stone tool production. Using controlled cutting tests and fracture mechanics theory we examine raw material selection decisions throughout Olduvai's Early Stone Age. We quantify the force, work and material deformation required by each stone type when cutting, before using these data to compare edge sharpness and durability. Significant differences are identified, confirming performance to depend on raw material choice. When combined with artefact data, we demonstrate that Early Stone Age hominins optimized raw material choices based on functional performance characteristics. Doing so flexibly: choosing raw materials dependent on their sharpness and durability, alongside a tool's loading potential and anticipated use-life. In this way, we demonstrate that early lithic artefacts at Olduvai Gorge were engineered to be functionally optimized cutting tools.

Microbiological and Sensory Suitability of a Novel Raw Material from Porcine Blood and Collagenous Rind Protein as an Ingredient in a Fermented Raw Salami-Type Sausage

2009 ◽  
Vol 72 (4) ◽  
pp. 826-836 ◽  
Author(s):  
BERNHARD NOWAK ◽  
THEDA von MUEFFLING
Keyword(s):  
Raw Materials ◽  
Meat Product ◽  
Raw Material ◽  
High Quality ◽  
B Values ◽  
Porcine Blood ◽  
Quality Product ◽  
Plate Counts ◽  
By Products ◽  
High Quality Product

The aim of this investigation was to develop a treatment for combined porcine blood corpuscle concentrate (BCC) and porcine collagenous connective tissue (rind) so as to make more use of these slaughter by-products as an ingredient in a high-quality product such as salami-type sausage. For this study, BCC was preserved, standardized (sBCC) (15% NaCl and 25% protein content), and then added (proportion of sBCC to rind, 15:85) to rind subjected to different treatments designated A, B, and C (A, 2 h at 90°C; B, 5 min at 90°C; and C, 2 h at 3°C). One half of each mixture was again heated (designated A1, B1, and C1; F70, ∼15), and the other half was only cooled (designated A2, B2, and C2). The now colored, highly proteinaceous rind mixtures (A1 to C2) were then cooled and granulated (designated GBR-A1 to GBR-C2). Three of the granulates (GBRA1, -B1, and -B2) proved to be promising new raw materials: their aerobic plate counts were &lt;log 4.0 CFU/g, and their color was appealing (L* values, 23.9 to 25.9; a* values, 17.7 to 22.2; b* values, 11.5 to 12.7). These granulates were then substituted for part (5%) of the meat in the production of fermented raw salami-type sausages. Two of the sausages (SA1 and SB1) were microbiologically stable (containing mainly lactobacilli) and had positive sensory, chemical, and physical properties (e.g., protein, 21%; water activity, 0.90; pH, between 5.3 and 5.4 on day 36) meeting all standards for commercially produced raw sausages. Our investigation yielded a practicable way to treat and combine two slaughter by-products for use in a high-quality meat product.

Sign in / Sign up

Export Citation Format

Share Document