scholarly journals Temperature and pH effects on the kinetics of 2-aminophenol auto-oxidation in aqueous solution

2003 ◽  
Vol 1 (3) ◽  
pp. 233-241 ◽  
Author(s):  
Dumitru Oancea ◽  
Mihaela Puiu
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Aqueous Solution ◽  
Ph Effects ◽  
Influence Of Temperature ◽  
First Order ◽  
Incremental Methods ◽  
First Order Kinetics ◽  
Ph Range ◽  
Kinetics Of

AbstractThe kinetics of the auto-oxidation of 2-aminophenol (OAP) to 2-amino-phenoxazin-3-one (APX) was followed in air-saturated aqueous solutions and the influence of temperature and pH on the auto-oxidation rate was studied. The kinetic analysis was based on a spectrophotometric method following the increase of the absorbance of APX. The process follows first order kinetics according to the rate law—d[OAP]/dt=k′[OAP]. The experimental data, within the pH range 4–9.85, were analyzed using both differential and incremental methods. The temperature variation of the overall rate constant was studied at pH=9.85 within the range 25–50°C and the corresponding activation energy was evaluated.

Kinetic of oxidation of methyl orange by vanadium(V) under conditions VO2+ and decavanadates coexist: Catalysis by Triton X-100 micellar medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Methyl Orange ◽  
Solution Ph ◽  
Vanadium Concentration ◽  
Limiting Behavior ◽  
First Order ◽  
First Order Kinetics ◽  
Ph Range ◽  
Kinetic Pattern ◽  
Triton X ◽  
Kinetics Of

The kinetics of oxidation of methyl orange by vanadium(V) {V(V)} has been investigated in the pH range 2.3-3.79. In this pH range V(V) exists both in the form of decavanadates and VO2+. The kinetic results are distinctly different from the results obtained for the same reaction in highly acidic solution (pH < 1) where V(V) exists only in the form of VO2+. The reaction obeys first order kinetics with respect to methyl orange but the rate has very little dependence on total vanadium concentration. The reaction is accelerated by H+ ion but the dependence of rate on [H+] is less than that corresponding to first order dependence. The equilibrium between decavanadates and VO2+ explains the different kinetic pattern observed in this pH range. The reaction is markedly accelerated by Triton X-100 micelles. The rate-[surfactant] profile shows a limiting behavior indicative of a unimolecular pathway in the micellar pseudophase.

Kinetics of Glyphosate Adsorption on Composite Resin from Aqueous Solution

2013 ◽  
Vol 803 ◽  
pp. 157-160
Author(s):  
Zhen Zhen Kong ◽  
Dong Mei Jia ◽  
Su Wen Cui
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Composite Resin ◽  
Order Equation ◽  
Second Order ◽  
First Order ◽  
Basic Resin ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Best Fit

The composite weakly basic resin (D301Fe) was prepared and examined using scanning electron microscopy and Fourier transform infrared spectroscopy. The adsorption kinetics of glyphosate from aqueous solution onto composite weakly basic resin (D301Fe) were investigated under different conditions. The experimental data was analyzed using various adsorption kinetic models like pseudo-first order, the pseudo-second order, the Elovich and the parabolic diffusion models to determine the best-fit equation for the adsorption of glyphosate onto D301Fe. The results show that the pseudo-second order equation fitted the experimental data well and its adsorption was chemisorption-controlled.

Pseudo-Homogenous Kinetics Model for the Synthesis of Dimethyl Carbonate from Urea and Methanol with Heterogeneous Catalyst

2011 ◽  
Vol 233-235 ◽  
pp. 481-486
Author(s):  
Wen Bo Zhao ◽  
Ning Zhao ◽  
Fu Kui Xiao ◽  
Wei Wei
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Dimethyl Carbonate ◽  
Side Reaction ◽  
Order Reaction ◽  
Zero Order ◽  
Kinetics Model ◽  
First Order ◽  
Zero Order Reaction ◽  
Kinetics Of

The synthesis of dimethyl carbonate (DMC) from urea and methanol includes two main reactions: one amino of urea is substituted by methoxy to produce the intermediate methyl carbamate (MC) which further converts to DMC via reaction with methanol again. In a stainless steel autoclave, the kinetics of these reactions was separately investigated without catalyst and with Zn-containing catalyst. Without catalyst, for the first reaction, the reaction kinetics can be described as first order with respect to the concentrations of methanol and methyl carbamate (MC), respectively. For the second reaction, the results exhibit characteristics of zero-order reaction. Over Zn-containing catalyst, the first reaction is neglected in the kinetics model since its rate is much faster than second reaction. After the optimization of reaction condition, the macro-kinetic parameters of the second reaction are obtained by fitting the experimental data to a pseudo-homogenous model, in which a side reaction of DMC synthesis is incorporated since it decreases the yield of DMC drastically at high temperature. The activation energy of the reaction from MC to DMC is 104 KJ/mol while that of the side reaction of DMC is 135 KJ/mol.

scholarly journals Kinetics of barite reduction from refractory barite-sulphide ore

10.30544/237 ◽  
2016 ◽  
Vol 22 (4) ◽  
pp. 261-268 ◽  
Author(s):  
Miroslav D Sokić ◽  
Vladislav Matković ◽  
Jovica Stojanović ◽  
Branislav Marković ◽  
Vaso Manojlović
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Kinetic Model ◽  
Copper Sulphide ◽  
Influence Of Temperature ◽  
Sulphide Ore ◽  
Lead Zinc ◽  
Complex Structural ◽  
Kinetics Of ◽  
Maximum Removal

Refractory sulphide–barite ore was reduced with carbon in order to release lead, zinc, and copper sulphide from barite-pyrite base. Mineralogical investigations showed that due to the complex structural-textural relationships of lead, copper and zinc minerals with gangue minerals, it is not possible to enrich the ore using the conventional methods of mineral processing. The influence of temperature and time was studied to optimize the conditions, and to determine the kinetics of the barite reduction. The maximum removal of barite from ore was 96.7% at 900oC after 180 min. Chemically controlled kinetic model showed the best compliance with the experimental data. An activation energy of 142 kJ/mol was found.

scholarly journals INFLUENCE OF TEMPERATURE AND PH ON THE DECOMPOSITION KINETICS OF PERACETIC ACID IN AQUEOUS SOLUTIONS

2014 ◽  
Vol 44 (3) ◽  
pp. 195-201
Author(s):  
L. KUNIGK ◽  
S. P. GALIZIA ◽  
R.T. K. SHIKISHIMA ◽  
R. GEDRAITE ◽  
C. H. JURKIEWICZ
Keyword(s):  
Activation Energy ◽  
Aqueous Solutions ◽  
Peracetic Acid ◽  
Food Industry ◽  
Decomposition Kinetics ◽  
Order Reaction ◽  
Influence Of Temperature ◽  
First Order ◽  
All Solutions ◽  
Kinetics Of

Peracetic acid (PAA) is a strong oxidant used by the food industry as a sanitizer, in medical area as a disinfectant and by the textiles and paper industries as a bleacher. Its decomposition rate is an important parameter in these applications. The main purpose of this paper is to study the decomposition kinetics of PAA between 25 and 45 °C in solutions with pH 3.11, 5.0 and 7.0. The decomposition of PAA is a first-order reaction for all solutions and temperatures studied. The rate constants were between 2.08·10-3 and 9.44·10-3 h-1 (pH 3.11), between 2.61·10-3 and 16.69·10-3 h-1 (pH 5.0) and between 7.50·10-3 and 47.63·10-3 h-1 (pH 7.0). The activation energy of PAA decomposition in aqueous solutions are 58.36 and 72.89 kJ·mol-1 when pH was 3.11 and 5.0, respectively.

THE NON-ENZYMATIC HYDROLYSIS OF ADENOSINE DIPHOSPHATE

1957 ◽  
Vol 35 (12) ◽  
pp. 1496-1503 ◽  
Author(s):  
K. A. Holbrook ◽  
Ludovic Ouellet
Keyword(s):  
Activation Energy ◽  
Aqueous Solution ◽  
Enzymatic Hydrolysis ◽  
Inorganic Phosphate ◽  
Adenosine Diphosphate ◽  
Hydrogen Ions ◽  
Kcal Mole ◽  
First Order ◽  
Kinetics Of ◽  
Hydrolysis Of

The kinetics of the non-enzymatic hydrolysis of adenosine diphosphate in aqueous solution have been studied at pH 3.5 to 10.5 and temperatures from 80° to 95 °C. The reaction has been followed by measuring colorimetrically the inorganic phosphate liberated according to the over-all reaction[Formula: see text]The reaction has been found to be first order with respect to ADP concentration and to be catalyzed by hydrogen ions. From rate studies at pH 8.0 an activation energy of 24.2 kcal./mole was derived. A mechanism is proposed to account for the observed facts and the mechanism for the hydrolysis of adenosine triphosphate is also discussed.

THE KINETICS OF THE FORMATION OF THE MONOSULPHATO COMPLEX OF IRON (III) IN AQUEOUS SOLUTION

1962 ◽  
Vol 40 (9) ◽  
pp. 1836-1845 ◽  
Author(s):  
G. G. Davis ◽  
W. MacF. Smith
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Ionic Strength ◽  
Continuous Flow ◽  
Hydrogen Ions ◽  
Kcal Mole ◽  
Forward Reaction ◽  
First Order ◽  
Kinetics Of Formation ◽  
Kinetics Of

The kinetics of formation of the monosulphato complex of iron (III) has been examined spectrophotometrically using a continuous-flow technique over the range of temperatures 15.6 to 34.5 °C in an aqueous medium of ionic strength 0.5 and a range of concentrations of hydrogen ions 0.05 to 0.30 M. The experimental data may be interpreted on the assumption that the significant reactions are a bimolecular association opposed by a first-order dissociation [Formula: see text] For the forward reaction ΔH≠ is 18.0 kcal mole−1 and ΔS≠ is 19.4 cal mole−1 deg−1.

scholarly journals The dissociation energy of the C-N bond in benzylamine

1949 ◽  
Vol 198 (1053) ◽  
pp. 285-292 ◽  
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Dissociation Energy ◽  
Heat Of Formation ◽  
Molar Ratio ◽  
Kcal Mole ◽  
First Order ◽  
First Order Kinetics ◽  
Permanent Gases ◽  
Kinetics Of

The kinetics of the thermal decomposition of benzylamine were studied by a flow method using toluene as a carrier gas. The decomposition produced NH 3 and dibenzyl in a molar ratio of 1:1, and small quantities of permanent gases consisting mainly of H 2 . Over a temperature range of 150° (650 to 800° C) the process was found to be a homogeneous gas reaction, following first-order kinetics, the rate constant being expressed by k = 6 x 10 12 exp (59,000/ RT ) sec. -1 . It was concluded, therefore, that the mechanism of the decomposition could be represented by the following equations: C 6 H 5 . CH 2 . NH 2 → C 6 H 5 . CH 2 • + NH 2 •, C 6 H 5 . CH 3 + NH 2 •→ C 6 H 5 . CH 2 • + NH 3 , 2C 6 H 5 . CH 2 •→ dibenzyl, and the experimentally determined activation energy of 59 ± 4 kcal./mole is equal to the dissociation energy of the C-N bond in benzylamine. Using the available thermochemical data we calculated on this basis the heat of formation of the NH 2 radical as 35.5 kcal./mole, in a fair agreement with the result obtained by the study of the pyrolysis of hydrazine. A review of the reactions of the NH 2 radicals is given.

scholarly journals Photodegradation of levofloxacin in aqueous and organic solvents: A kinetic study

2013 ◽  
Vol 63 (2) ◽  
pp. 223-229 ◽  
Author(s):  
Iqbal Ahmad ◽  
Raheela Bano ◽  
Muhammad Ali Sheraz ◽  
Sofia Ahmed ◽  
Tania Mirza ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Degradation Rate ◽  
Hplc Method ◽  
Ph Profile ◽  
Degree Of Ionization ◽  
First Order ◽  
First Order Kinetics ◽  
Anionic Species ◽  
Ph Range ◽  
Kinetics Of

The kinetics of photodegradation of levofloxacin in solution on UV irradiation in the pH range 2.0-12.0 has been studied using a HPLC method. Levofloxacin undergoes first-order kinetics in the initial stages of the reaction and the apparent first-order rate constants are of the order of 0.167 to 1.807×10-3 min-1. The rate-pH profile is represented by a curve indicating the presence of cationic, dipolar and anionic species during the reaction. The singly ionized form of the molecule is non-fluorescent and is less susceptible to photodegradation. The increase in the degradation rate in the pH range 5.0-9.0 may be due to greater reactivity of the ionized species existing in that range. The rate appears to vary with a change in the degree of ionization of the species present in a particular pH range and their susceptibility to photodegradation. Above pH 9, the decrease in the rate of photodegradation may be a result of deprotonation of the piperazinyl group. The levofloxacin molecule is more stable in the pH range around 7, which is then suitable for formulation purposes. The photodegradation of levofloxacin was found to be affected by the dielectric constant and viscosity of the medium

Kinetics and mechanism of the cytochrome c – sulfite reaction

1991 ◽  
Vol 56 (7) ◽  
pp. 1552-1559
Author(s):  
Joaquin F. Perez-Benito ◽  
Conchita Arias
Keyword(s):  
Activation Energy ◽  
Aqueous Solution ◽  
Cytochrome C ◽  
Apparent Activation Energy ◽  
Sodium Sulfite ◽  
Horse Heart Cytochrome ◽  
First Order ◽  
Cyt C ◽  
Ph Range ◽  
Horse Heart Cytochrome C

The reaction between the oxidized form of horse-heart cytochrome c and sodium sulfite in aqueous solution has been studied in the pH range 6.5 – 8.2. The reaction is first order in both oxidant and reductant, is accelerated by an increase in pH and is slowed down by addition of potassium chloride. An increase in pH results in an increase in the apparent activation energy (66-77kJ . mol-1). A mechanism in which both HSO3- and SO32- act as reducing agents is proposed, the activation energies corresponding to the cyt c-HSO3- and cyt c-SO32- reactions being 63 ± 4 and 79 ± 2 kJ mol-1, respectively.

Sign in / Sign up

Export Citation Format

Share Document