scholarly journals Influence of Regulated Drip Irrigation on Productivity and Physicochemical Traits of Tomato ‘Tofane’ under Hot Desert Climate

2020 ◽  
Vol 28 (1) ◽  
pp. 93-100
Author(s):  
Chenafi Azzeddine ◽  
Bachir Bey Mostapha ◽  
Chennafi Houria
Keyword(s):  
Water Content ◽  
Fruit Quality ◽  
Drip Irrigation ◽  
Deficit Irrigation ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Stage Iii ◽  
Regulated Deficit Irrigation ◽  
Desert Climate

AbstractThe impact of regulated drip-irrigation on productivity and fruit quality of tomato ‘Tofane’ has been studied under a warm dry desert climate in southern Algeria. Yield, fruit weight and size, water content and parameters of fruit quality – total soluble solids, phenolic compounds, carotenoids, vitamin C, pH and titratable acidity were determined. Two irrigation treatments were applied in 2012 and 2013: T1, optimal irrigation (100% evapotranspiration – ETc) during the whole growth period (growth stages I, II and III); T2, optimal irrigation during I and II stages, and regulated deficit irrigation (67% ETc) during stage III (from fruit set to full fruit maturity of first and second bunch). T1 treatment during the whole season showed the highest values of soil water potential (Ψsoil), between −0.02 MPa and −0.06 MPa, on depths of 0.3 and 0.6 m, respectively. During stage III, regulated deficit irrigation caused the lowest Ψsoil values, which were between −0.1 MPa and −0.12 MPa on a soil depth of 0.3 and 0.6 m, respectively. Deficit irrigation caused significant decrease of water content in fruits and not significant decrease of fruit weight and size, as well as fruit yield while water saving for irrigation amounted to 10%. Comfort-irrigated tomato plants produced fruits containing significantly higher titratable acidity, total soluble solids and vit. C content. There was a tendency to decrease carotenoid content and increase phenolic content in both years of the study. Due to the possibility of water saving with not significant yield decrease, it seems that the reduction of water use in growth stage III would be an adequate strategy for tomato cultivation in hot, dry climate.

scholarly journals High-density linkage map construction and identification of loci regulating fruit quality traits in blueberry

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Molla F. Mengist ◽  
Hamed Bostan ◽  
Elisheba Young ◽  
Kristine L. Kay ◽  
Nicholas Gillitt ◽  
...  
Keyword(s):  
Linkage Map ◽  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
High Density ◽  
Soluble Solids ◽  
Quality Traits ◽  
Total Soluble Solids ◽  
Fruit Quality Traits ◽  
High Density Linkage Map

AbstractFruit quality traits play a significant role in consumer preferences and consumption in blueberry (Vaccinium corymbosum L). The objectives of this study were to construct a high-density linkage map and to identify the underlying genetic basis of fruit quality traits in blueberry. A total of 287 F1 individuals derived from a cross between two southern highbush blueberry cultivars, ‘Reveille’ and ‘Arlen’, were phenotyped over three years (2016–2018) for fruit quality-related traits, including titratable acidity, pH, total soluble solids, and fruit weight. A high-density linkage map was constructed using 17k single nucleotide polymorphisms markers. The linkage map spanned a total of 1397 cM with an average inter-loci distance of 0.08 cM. The quantitative trait loci interval mapping based on the hidden Markov model identified 18 loci for fruit quality traits, including seven loci for fruit weight, three loci for titratable acidity, five loci for pH, and three loci for total soluble solids. Ten of these loci were detected in more than one year. These loci explained phenotypic variance ranging from 7 to 28% for titratable acidity and total soluble solid, and 8–13% for pH. However, the loci identified for fruit weight did not explain more than 10% of the phenotypic variance. We also reported the association between fruit quality traits and metabolites detected by Proton nuclear magnetic resonance analysis directly responsible for these fruit quality traits. Organic acids, citric acid, and quinic acid were significantly (P < 0.05) and positively correlated with titratable acidity. Sugar molecules showed a strong and positive correlation with total soluble solids. Overall, the study dissected the genetic basis of fruit quality traits and established an association between these fruit quality traits and metabolites.

scholarly journals FOLIAR APPLICATIONS OF ZINC, IRON AND MANGANESE INFLUENCE THE PLANT GROWTH AND FRUIT QUALITY OF PAPAYA CV. RED LADY

2020 ◽  
Vol 8 (5) ◽  
pp. 551-557
Author(s):  
Gurjot Singh Pelia ◽  
◽  
A K Baswal ◽  
Keyword(s):  
Plant Growth ◽  
Fruit Quality ◽  
Foliar Application ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Total Carotenoids ◽  
Heavy Soil

Prevalence of heavy soil is a major problem for fruit cultivation under Punjab conditions consequently leading to deficiency of several micro-nutrients including zinc (Zn), iron (Fe), and manganese (Mn) which adversely affects the growth and productivity. In this view, a study was planned to investigate the effect of foliar applications of zinc sulphate (ZnSO4), iron sulphate (FeSO4), and manganese sulphate (MnSO4) on vegetative growth, reproductive growth and fruit quality of papaya cv. Red lady. Plants sprayed with ZnSO4 (0.4 %) exhibited significantly highest plant height, plant girth, number of leaves, petiole length; initiated an earliest flowering and fruiting; and improved fruit quality viz., fruit weight, fruit length, titratable acidity, soluble solids concentrations, ascorbic acid content, total phenols content, and total carotenoids content as compared with the control and all other treatments. In conclusion, foliar application ZnSO4 (0.4 %) significantly improved plant growth and fruit quality in papaya cv. Red lady.

scholarly journals Apple Orchard Productivity and Fruit Quality under Organic, Conventional, and Integrated Management

HortScience ◽  
2006 ◽  
Vol 41 (1) ◽  
pp. 99-107 ◽  
Author(s):  
Gregory M. Peck ◽  
Preston K. Andrews ◽  
John P. Reganold ◽  
John K. Fellman
Keyword(s):  
Fruit Quality ◽  
Crop Yields ◽  
Block Design ◽  
Leaf Tissue ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Apple Orchard ◽  
Soluble Solids ◽  
Crop Load ◽  
Flesh Firmness

Located on a 20-ha commercial apple (Malus domestica Borkh.) orchard in the Yakima Valley, Washington, a 1.7-ha study area was planted with apple trees in 1994 in a randomized complete block design with four replications of three treatments: organic (ORG), conventional (CON), and integrated (INT). Soil classification, rootstock, cultivar, plant age, and all other conditions except management were the same on all plots. In years 9 (2002) and 10 (2003) of this study, we compared the orchard productivity and fruit quality of `Galaxy Gala' apples. Measurements of crop yield, yield efficiency, crop load, average fruit weight, tree growth, color grades, and weight distributions of marketable fruit, percentages of unmarketable fruit, classifications of unmarketable fruit, as well as leaf, fruit, and soil mineral concentrations, were used to evaluate orchard productivity. Apple fruit quality was assessed at harvest and after refrigerated (0 to 1 °C) storage for three months in regular atmosphere (ambient oxygen levels) and for three and six months in controlled atmosphere (1.5% to 2% oxygen). Fruit internal ethylene concentrations and evolution, fruit respiration, flesh firmness, soluble solids concentration (SSC), titratable acidity (TA), purgeable volatile production, sensory panels, and total antioxidant activity (TAA) were used to evaluate fruit quality. ORG crop yields were two-thirds of the CON and about half of the INT yields in 2002, but about one-third greater than either system in 2003. High ORG yields in 2003 resulted in smaller ORG fruit. Inconsistent ORG yields were probably the result of several factors, including unsatisfactory crop load management, higher pest and weed pressures, lower leaf and fruit tissue nitrogen, and deficient leaf tissue zinc concentrations. Despite production difficulties, ORG apples had 6 to 10 N higher flesh firmness than CON, and 4 to 7 N higher than INT apples, for similar-sized fruit. Consumer panels tended to rate ORG and INT apples to have equal or better overall acceptability, firmness, and texture than CON apples. Neither laboratory measurements nor sensory evaluations detected differences in SSC, TA, or the SSC to TA ratio. Consumers were unable to discern the higher concentrations of flavor volatiles found in CON apples. For a 200 g fruit, ORG apples contained 10% to 15% more TAA than CON apples and 8% to 25% more TAA than INT apples. Across most parameters measured in this study, the CON and INT farm management systems were more similar to each other than either was to the ORG system. The production challenges associated with low-input organic apple farming systems are discussed. Despite limited technologies and products for organic apple production, the ORG apples in our study showed improvements in some fruit quality attributes that could aid their marketability.

scholarly journals Influence of Pre- and Postharvest Summer Pruning on the Growth, Yield, Fruit Quality, and Carbohydrate Content of Early Season Peach Cultivars

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Ali Ikinci
Keyword(s):  
Fruit Quality ◽  
Growth Yield ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Carbohydrate Content ◽  
Shoot Length ◽  
Soluble Solids ◽  
Carbohydrate Accumulation ◽  
Cross Sectional ◽  
Climate Conditions

Winter and summer pruning are widely applied processes in all fruit trees, including in peach orchard management. This study was conducted to determine the effects of summer prunings (SP), as compared to winter pruning (WP), on shoot length, shoot diameter, trunk cross sectional area (TCSA) increment, fruit yield, fruit quality, and carbohydrate content of two early ripening peach cultivars (“Early Red” and “Maycrest”) of six years of age, grown in semiarid climate conditions, in 2008 to 2010. The trees were grafted on GF 677 rootstocks, trained with a central leader system, and spaced 5 × 5 m apart. The SP carried out after harvesting in July and August decreased the shoot length significantly; however, it increased its diameter. Compared to 2009, this effect was more marked in year 2010. In general, control and winter pruned trees of both cultivars had the highest TCSA increment and yield efficiency. The SP increased the average fruit weight and soluble solids contents (SSC) more than both control and WP. The titratable acidity showed no consistent response to pruning time. The carbohydrate accumulation in shoot was higher in WP and in control than in SP trees. SP significantly affected carbohydrate accumulation; postharvest pruning showed higher carbohydrate content than preharvest pruning.

Effects of Trichoderma harzianum on the yield and fruit quality of tomato plants (Lycopersicon esculentum) grown in an unheated greenhouse

2006 ◽  
Vol 46 (1) ◽  
pp. 131 ◽  
Author(s):  
U. Bal ◽  
S. Altintas
Keyword(s):  
Fruit Quality ◽  
Trichoderma Harzianum ◽  
Root Zone ◽  
Total Yield ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Marketable Yield ◽  
Growing Media ◽  
Growing Period

Trichoderma harzianum was applied to seedling growing media (a peat and soil-based mixture or greenhouse soil) at the time of sowing, at transplanting to vials and at planting. The factorial experiment using 2 seedling growing media, 2 cultivars and 4 dosages of T. harzianum at 0 (control), 4 g/m2, 10 g/m2 and 24 g/m2 showed that the Trichoderma dosage had no significant effect on the yield or fruit quality. None of the 3 factor interactions between the criteria studied, that is, total yield, marketable yield, early yield, individual fruit weight, total soluble solids and titratable acidity, were significant except for fruit diameter. The 3 factor combination of Peat × Belleveu F1 × 10 g/m2 resulted in the highest total yield, marketable yield and early yield with 1552, 1373 and 681 g/plant, respectively. The interaction between media and cultivars was significant for all the yield characteristics studied. However, the main effect of T. harzianum on early yield was the highest at 4 g/m2, producing 527 g/plant in comparison to the control with 374 g/plant. It was, therefore, hypothesised that the positive effect of T. harzianum, observed in the early yield, may be extended to the whole growing period by further applications, that is, by periodical renewal of the T. harzianum population at the root zone.

scholarly journals Effect of Low Pressure and Low Oxygen Treatments on Fruit Quality and the In Vivo Growth of Penicillium digitatum and Penicillium italicum in Oranges

Horticulturae ◽  
2021 ◽  
Vol 7 (12) ◽  
pp. 582
Author(s):  
John Archer ◽  
Penta Pristijono ◽  
Quan V. Vuong ◽  
Lluís Palou ◽  
John B. Golding
Keyword(s):  
Fruit Quality ◽  
Titratable Acidity ◽  
Low Pressure ◽  
Fruit Weight ◽  
Penicillium Digitatum ◽  
Soluble Solids ◽  
Low Oxygen ◽  
Exogenous Ethylene ◽  
In Vivo Growth

Penicillium digitatum and P. italicum are the major postharvest pathogens in citrus. To reduce postharvest decay, the use of low-oxygen (0.9 kPa O2) (LO) or low-pressure (6.6 kPa) (LP) treatments were evaluated during the storage of navel oranges for four or eight days. The results showed that exposure to both LO and LP treatments reduced in vivo pathogen growth compared to the untreated (UTC) oranges, with LO being the most effective. The effects of LO and LP on fruit metabolism and quality were further assessed, and it was found that there was no effect on fruit ethylene production, respiration rate, TSS (total soluble solids), TA (titratable acidity) or fruit firmness. However, both LO and LP treatments did have an effect on juice ethanol concentration and fruit weight-loss. The effect of adding exogenous ethylene at either LP (1 µL/L) or atmospheric pressure (AP) (at either 0.1, 1 µL/L) was also evaluated, and results showed that the addition of ethylene at these concentrations had no effect on mould diameter at LP or AP. Therefore, both LO of 0.9 kPa O2 and LP of 6.6 kPa at 20 °C are potential non-chemical postharvest treatments to reduce mould development during storage with minimal effects on fruit quality.

scholarly journals Effect of Cultivar and Site on Fruit Quality as Demonstrated by the NE-183 Regional Project on Apple Cultivars

2005 ◽  
Vol 15 (4) ◽  
pp. 886-895 ◽  
Author(s):  
S.S. Miller ◽  
R.W. McNew ◽  
B.H. Barritt ◽  
L. Berkett ◽  
S.K. Brown ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Growing Seasons ◽  
Solids Concentration ◽  
Regional Project ◽  
Apple Cultivars ◽  
Hedonic Scale

Cultivar and planting site are two factors that often receive minimal attention, but can have a significant impact on the quality of apple (Malus ×domestica) produced. A regional project, NE-183 The Multidisciplinary Evaluation of New Apple Cultivars, was initiated in 1995 to systematically evaluate 20 newer apple cultivars on Malling.9 (M.9) rootstock across 19 sites in North America. This paper describes the effect of cultivar and site on fruit quality and sensory attributes at a number of the planting sites for the 1998 through 2000 growing seasons. Fruit quality attributes measured included fruit weight, length: diameter ratio, soluble solids concentration (SSC), titratable acidity (TA), flesh firmness, red overcolor, and russet. Fruit sensory characteristics rated included crispness, sweetness, and juiciness, based on a unipolar intensity scale (where 1 = least and 5 = most), and acidity, flavor, attractiveness, and desirability based on a bipolar hedonic scale (where 1 = dislike and 5 = like extremely). All fruit quality and sensory variables measured were affected by cultivar. The two-way interaction of cultivar and planting site was significant for all response variables except SSC, TA, russet, crispness, and sweetness ratings. The SSC: TA ratio was strongly correlated with sweetness and acidity sensory rating, but was weakly correlated with flavor rating. The results demonstrate that no one cultivar is ideally suited for all planting sites and no planting site is ideal for maximizing the quality of all apple cultivars.

scholarly journals GA3—INDUCED FRUIT SET OF RABBITEYE BLUEBERRY

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 689c-689
Author(s):  
Raguel Cano—M ◽  
Rebecca L. Darnell
Keyword(s):  
Fruit Quality ◽  
Fruit Development ◽  
Fruit Set ◽  
Total Yield ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Full Bloom ◽  
Development Period

The effects of different GA3 concentrations and application times on fruit set, fruit development period, and fruit quality in rabbiteye blueberry (Vaccinium ashei Reade) were studied. Flower clusters were sprayed with 100 or 250 ppm GA3 at 90% full bloom and again 7 days later, or with 125 ppm GA3 at 90% full bloom and again 7, 21, and 42 days later, under greenhouse conditions. Fruit set was monitored every 10 days and fruit weight, fruit development period, soluble solids, and titratable acidity were measured at harvest. Fruit set in GA3 treatments averaged 69 to 76% compared to an average of 43% for the pollinated control. Weight of GA3 treated berries averaged 1.2, g while that of pollinated berries averaged 2.0 g. However, calculated total yield was greater for the GA3 treatments compared to the pollinated control, averaging 244 and 206 g/treatment, respectively. GA3 increased the fruit development period by 2 to 11 days, depending on the treatment. Soluble solids and titratable acidity were not affected by any treatment.

In-row Vegetation-free Strip Width Effect on Established ‘Navaho’ Blackberry

2017 ◽  
Vol 32 (1) ◽  
pp. 85-89 ◽  
Author(s):  
Nicholas T. Basinger ◽  
Katherine M. Jennings ◽  
David W. Monks ◽  
Wayne E. Mitchem ◽  
Penelope M. Perkins-Veazie ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Growth Yield ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Strip Width ◽  
Soluble Solids ◽  
Cumulative Yield ◽  
Current Recommendation ◽  
Berry Weight ◽  
Berry Quality

AbstractA field study was conducted in 2014 and 2015 in an established 5-yr old commercial blackberry planting to determine the effect of vegetation-free strip width (VFSW) on ‘Navaho’ blackberry vegetative growth, yield and fruit quality parameters, identify the optimum VFSW for blackberry plantings in the southeastern USA, and provide practical groundcover management recommendations that can increase the productivity of blackberry plantings. In Fall 2013, tall fescue was seeded in-row and allowed to establish. In Spring 2014, VFSW treatments (0, 0.6, 0.9, 1.2, and 1.8 m) were established in a randomized complete block statistical design with four replications. Blackberry growth measurements included primocane and floricane number, cane diam, individual fruit weight and yield. Fruit quality measurements included, soluble solids concentration (SSC), titratable acidity (TA) and pH. Primocane number increased with increasing VFSW in both years. Floricane number increased with increasing VFSW in 2014. Primocane diam decreased with increasing VFSW in 2014 but had a quadratic response in 2015. Berry weight and cumulative yield increased with increasing VFSW in both years. The only berry quality component affected by VFSW was pH, which decreased as VFSW increased. Results indicate that widening the VFSW in blackberry from the current recommendation of 1.2 m to 1.8 m could provide growers a means to increase plant growth, berry weight, and cumulative yield blackberry of a planting.

Changes in physico-chemical and sensory fruit quality attributes of apricot during ripening

2020 ◽  
pp. 36-40
Author(s):  
Munir Ahmad ◽  
Sami Ullah ◽  
Ishtiaq Ahmad Rajwana ◽  
Gulzar Akhtar ◽  
Kashif Razzaq ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Fruit Ripening ◽  
Titratable Acidity ◽  
Sensory Attributes ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Total Phenolic ◽  
Ambient Conditions ◽  
Physico Chemical ◽  
Varietal Variation

Varietal variation in apricot causes differential changes in fruit quality during ripening. A study was executed to evaluate the effect of apricot varietal variation on fruit physico-chemical and sensory attributes during fruit ripening. Fruits of two apricot cultivars, ‘Old Cap’ and ‘Red Flesh’ obtained from Baluchistan were monitored at ambient conditions (25 ± 2 °C and 60-65% RH) during fruit ripening for physico-chemical and sensory attributes. Irrespective to days at shelf during fruit ripening, fruits of ‘Red Flesh’ apricot exhibited significantly reduced fruit weight loss with greater fruit firmness, total soluble solids (TSS), total phenolic content (TPC), ascorbic acid and antioxidant scavenging activity (ASA) than ‘Old Cap’ apricot fruits. However, titratable acidity (TA) of ‘Old Cap’ apricot fruits remained significantly higher than ‘Red Flesh’ apricot fruits during ripening. At eating soft stage, sensory attributes including fruit pulp colour, taste, flavour and overall acceptability of ‘Red Flesh’ apricot fruits were superior to ‘Old Cap’ apricot fruits. In conclusion, ‘Red Flesh’ apricot showed better fruit physico-chemical attributes during fruit ripening and fruit sensory attributes at eating soft stage than ‘Old Cap’ apricot fruits.

Sign in / Sign up

Export Citation Format

Share Document