scholarly journals Cutting Performance of High Purity Alumina Ceramic Tools formed by a High-speed Centrifugal Compaction process.

1995 ◽  
Vol 42 (4) ◽  
pp. 464-468 ◽  
Author(s):  
Shunzo Tashima ◽  
Yasuo Yamane ◽  
Hidenori Kuroki ◽  
Norihiko Narutaki
Keyword(s):  
High Purity ◽  
High Speed ◽  
Alumina Ceramic ◽  
Cutting Performance ◽  
Compaction Process ◽  
Ceramic Tools

Cutting performance and wear mechanism of Sialon ceramic tools in high speed face milling GH4099

2020 ◽  
Vol 46 (2) ◽  
pp. 1621-1630 ◽  
Author(s):  
Jianfei Sun ◽  
Shun Huang ◽  
Haitao Ding ◽  
Wuyi Chen
Keyword(s):  
Wear Mechanism ◽  
High Speed ◽  
Face Milling ◽  
Cutting Performance ◽  
Ceramic Tools ◽  
Sialon Ceramic

Study on the Cutting Performance of Al2O3-TiC-TiN Ceramic Tool Materials

2016 ◽  
Vol 693 ◽  
pp. 1148-1154 ◽  
Author(s):  
Yu Huan Fei ◽  
Chuan Zhen Huang ◽  
Han Lian Liu ◽  
Bin Zou
Keyword(s):  
Wear Resistance ◽  
High Speed ◽  
Cutting Tools ◽  
Tool Material ◽  
Cutting Performance ◽  
Cutting Condition ◽  
The Novel ◽  
Ceramic Tools ◽  
Diffusion Wear ◽  
Hot Pressing Sintering

In this work, two kinds of Al2O3-TiC-TiN ceramic cutting tools (AC2U and AC2UN2) were developed by hot-pressing sintering techniques. The mechanical properties were measured and the cutting performance was investigated. The workpiece used in the cutting experiment was quenched carbon tool steel T10A, and the tool material for comparison was LT55. The wear resistance and the main wear patterns of the ceramic tools were analyzed at the high speed of 300m/min. The results indicated that the novel Al2O3-TiC-TiN ceramic cutting tools showed better cutting performance than LT55, and AC2UN2 was better suitable for machining quenched T10A. When the cutting condition was v=300m/min, f=0.1mm/r and ap=0.1mm, the adhesion wear and abrasive wear of the novel ceramic tools were slighter than those of LT55, the diffusion wear resistance of AC2U was better and the oxidation resistance of AC2UN2 was better.

Cutting Performance of Ceramic Tools in Turning of Mild Steel

2012 ◽  
Vol 523-524 ◽  
pp. 493-496 ◽  
Author(s):  
Ryutaro Tanaka ◽  
Akira Hosokawa ◽  
Tatsuaki Furumoto ◽  
Takashi Ueda
Keyword(s):  
Mild Steel ◽  
Tool Life ◽  
Cutting Speed ◽  
Alumina Ceramic ◽  
Cutting Performance ◽  
The Other ◽  
Ceramic Tool ◽  
Ceramic Tools ◽  
Coated Carbide ◽  
Standard Steel

This study deals with the cutting performance of ceramic tools in turning of mild steel and BN free-machining steel based on it. The tool lives of ceramic tools in turning standard steel were less than 15 min at the cutting speed 250 m/min. On the other hand, the tool lives in turning of BN free-machining steel were obvious longer than that of standard steel. The tool life of TiC added alumina ceramic tool reached almost 10 hours in the case that the tool life criteria was set at VB=0.3mm. This tool life was twice as long as that of coated carbide tool.

Sign in / Sign up

Export Citation Format

Share Document