Comparison of elasticity and shell theory solutions for long circular cylindrical shells.

AIAA Journal ◽  
1966 ◽  
Vol 4 (12) ◽  
pp. 2090-2096 ◽  
Author(s):  
K. T. SUNDARA RAJA IYENGAR ◽  
C. V. YOGANANDA
Keyword(s):  
Shell Theory ◽  
Cylindrical Shells ◽  
Circular Cylindrical Shells

scholarly journals Vibration of rotating circular cylindrical shells with distributed springs

2021 ◽  
Vol 37 ◽  
pp. 346-358
Author(s):  
Fuchun Yang ◽  
Xiaofeng Jiang ◽  
Fuxin Du
Keyword(s):  
Boundary Conditions ◽  
Galerkin Method ◽  
Shell Theory ◽  
Rotation Speed ◽  
Cylindrical Shells ◽  
Free Vibrations ◽  
Governing Equations ◽  
Natural Response ◽  
Circular Cylindrical Shells ◽  
The Galerkin Method

Abstract Free vibrations of rotating cylindrical shells with distributed springs were studied. Based on the Flügge shell theory, the governing equations of rotating cylindrical shells with distributed springs were derived under typical boundary conditions. Multicomponent modal functions were used to satisfy the distributed springs around the circumference. The natural responses were analyzed using the Galerkin method. The effects of parameters, rotation speed, stiffness, and ratios of thickness/radius and length/radius, on natural response were also examined.

A Multi-Mode Approach for the Nonlinear Vibrations of Circular Cylindrical Shells

2001 ◽  
Author(s):  
Francesco Pellicano ◽  
Marco Amabili ◽  
Michael P. Païdoussis
Keyword(s):  
Degrees Of Freedom ◽  
Nonlinear Vibrations ◽  
Shell Theory ◽  
Cylindrical Shells ◽  
Nonlinear Behavior ◽  
Symbolic Manipulation ◽  
Comparison Functions ◽  
Circular Cylindrical Shells ◽  
Multi Mode

Abstract The nonlinear vibrations of simply supported, circular cylindrical shells, having geometric nonlinearities is analyzed. Donnell’s nonlinear shallow-shell theory is used, and the partial differential equations are spatially discretized by means of the Galerkin procedure, using a large number of degrees of freedom. A symbolic manipulation code is developed for the discretization, allowing an unlimited number of modes. In the displacement expansion particular care is given to the comparison functions in order to reduce as much as possible the dimension of the dynamical system, without losing accuracy. Both driven and companion modes are included, allowing for traveling-wave response of the shell. The fundamental role of the axisymmetric modes, which are included in the expansion, is confirmed and a convergence analysis is performed. The effect of the geometric shell characteristics, radius, length and thickness, on the nonlinear behavior is analyzed.

Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells Stiffened by a Bonded Central Shell Segment

2004 ◽  
Author(s):  
U. Yuceoglu ◽  
V. O¨zerciyes
Keyword(s):  
Cylindrical Shell ◽  
Shell Theory ◽  
Natural Frequencies ◽  
Circular Cylindrical Shell ◽  
Cylindrical Shells ◽  
Adhesive Layer ◽  
Shear Stresses ◽  
First Order ◽  
Stress Resultant ◽  
Circular Cylindrical Shells

This study is concerned with the “Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells Stiffened by a Bonded Central Shell Segment.” The base shell is made of an orthotropic “full” circular cylindrical shell reinforced and/or stiffened by an adhesively bonded dissimilar, orthotropic “full” circular cylindrical shell segment. The stiffening shell segment is located at the mid-center of the composite system. The theoretical analysis is based on the “Timoshenko-Mindlin-(and Reissner) Shell Theory” which is a “First Order Shear Deformation Shell Theory (FSDST).” Thus, in both “base (or lower) shell” and in the “upper shell” segment, the transverse shear deformations and the extensional, translational and the rotary moments of inertia are taken into account in the formulation. In the very thin and linearly elastic adhesive layer, the transverse normal and shear stresses are accounted for. The sets of the dynamic equations, stress-resultant-displacement equations for both shells and the in-between adhesive layer are combined and manipulated and are finally reduced into a ”Governing System of the First Order Ordinary Differential Equations” in the “state-vector” form. This system is integrated by the “Modified Transfer Matrix Method (with Chebyshev Polynomials).” Some asymmetric mode shapes and the corresponding natural frequencies showing the effect of the “hard” and the “soft” adhesive cases are presented. Also, the parametric study of the “overlap length” (or the bonded joint length) on the natural frequencies in several modes is considered and plotted.

Development of beam modal function for free vibration analysis of FML circular cylindrical shells

2017 ◽  
Vol 24 (14) ◽  
pp. 3026-3035 ◽  
Author(s):  
Masood Mohandes ◽  
Ahmad Reza Ghasemi ◽  
Mohsen Irani-Rahagi ◽  
Keivan Torabi ◽  
Fathollah Taheri-Behrooz
Keyword(s):  
Free Vibration ◽  
Shell Theory ◽  
Volume Fraction ◽  
Equations Of Motion ◽  
Cylindrical Shells ◽  
Free Vibration Analysis ◽  
Governing Equations ◽  
Fiber Metal Laminate ◽  
Circular Cylindrical Shells ◽  
Fiber Metal

The free vibration of fiber–metal laminate (FML) thin circular cylindrical shells with different boundary conditions has been studied in this research. Strain–displacement relations have been obtained according to Love’s first approximation shell theory. To satisfy the governing equations of motion, a beam modal function model has been used. The effects of different FML parameters such as material properties lay-up, volume fraction of metal, fiber orientation, and axial and circumferential wavenumbers on the vibration of the shell have been studied. The frequencies of shells have been calculated for carbon/epoxy and glass/epoxy as composites and for aluminum as metal. The results demonstrate that the influences of FML lay-up and volume fraction of composite on the frequencies of the shell are remarkable.

Laminated Transversely Isotropic Cylindrical Shells

1971 ◽  
Vol 38 (2) ◽  
pp. 400-407 ◽  
Author(s):  
J. A. Zukas ◽  
J. R. Vinson
Keyword(s):  
Shell Theory ◽  
Transverse Isotropy ◽  
Cylindrical Shells ◽  
Pyrolytic Graphite ◽  
Transversely Isotropic ◽  
Sample Problem ◽  
Governing Equations ◽  
Slow Cooling ◽  
Circular Cylindrical Shells ◽  
Thin Shell Theory

A theory for the analysis of stresses in laminated circular cylindrical shells subjected to arbitrary axisymmetric mechanical and thermal loadings has been developed. This theory, specifically for use with pyrolytic-graphite-type materials, differs from the classical thin shell theory in that it includes the effects of transverse shear deformation and transverse isotropy, as well as thermal expansion through the shell thickness. Solutions in several forms are developed for the governing equations. The form taken by the solution function is governed by geometric considerations. A range in which the various solution forms occur was determined numerically. As a sample problem, the slow cooling of pyrolytic graphite deposited onto a commercial graphite mandrel was considered. Investigation of normal and shear stress behavior at the pyrolytic graphite-mandrel interface showed that these stresses decrease in magnitude with increasing E/Gc ratio and increasing deposit to mandrel thickness (ha/hb) ratio. This implies that a thin mandrel and a material weak in shear are desirable to minimize the possibilities of flaking and delamination of the pyrolytic graphite.

Sign in / Sign up

Export Citation Format

Share Document