Transient Creep-Fatigue Crack Growth in Creep-Ductile and Creep-Brittle Materials

2020 ◽  
Author(s):  
Thomas Siegmund
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Brittle Materials ◽  
Transient Creep ◽  
Creep Fatigue ◽  
Creep Fatigue Crack

scholarly journals Creep-Fatigue Crack Growth in Sn-3.0Ag-0.5Cu Solder

2010 ◽  
Vol 4 (9) ◽  
pp. 1410-1426 ◽  
Author(s):  
Tae Wuk WOO ◽  
Masao SAKANE ◽  
Kwang Soo KIM ◽  
Kaoru KOBAYASHI ◽  
Hyun Chul PARK
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Creep Fatigue ◽  
Creep Fatigue Crack

scholarly journals A Concise Binomial Model for Nonlinear Creep-Fatigue Crack Growth Behavior at Elevated Temperatures

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 651
Author(s):  
Jianxing Mao ◽  
Zhixing Xiao ◽  
Dianyin Hu ◽  
Xiaojun Guo ◽  
Rongqiao Wang
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Dwell Time ◽  
Elevated Temperatures ◽  
Nonlinear Creep ◽  
Nickel Based Superalloy ◽  
Proposed Model ◽  
Creep Fatigue ◽  
Creep Fatigue Crack

The creep-fatigue crack growth problem remains challenging since materials exhibit different linear and nonlinear behaviors depending on the environmental and loading conditions. In this paper, we systematically carried out a series of creep-fatigue crack growth experiments to evaluate the influence from temperature, stress ratio, and dwell time for the nickel-based superalloy GH4720Li. A transition from coupled fatigue-dominated fracture to creep-dominated fracture was observed with the increase of dwell time at 600 °C, while only the creep-dominated fracture existed at 700 °C, regardless of the dwell time. A concise binomial crack growth model was constructed on the basis of existing phenomenal models, where the linear terms are included to express the behavior under pure creep loading, and the nonlinear terms were introduced to represent the behavior near the fracture toughness and during the creep-fatigue interaction. Through the model implementation and validation of the proposed model, the correlation coefficient is higher than 0.9 on ten out of twelve sets of experimental data, revealing the accuracy of the proposed model. This work contributes to an enrichment of creep-fatigue crack growth data in the typical nickel-based superalloy at elevated temperatures and could be referable in the modeling for damage tolerance assessment of turbine disks.

The Effect of Cyclic Hardening Model on Deformation Behavior of Cracked Body Under Creep-Fatigue Loading Condition

2020 ◽  
Author(s):  
Hyun-Woo Jung ◽  
Yun-Jae Kim ◽  
Yukio Takahashi ◽  
Kamran Nikbin ◽  
Catrin M. Davies ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Deformation Behavior ◽  
Kinematic Hardening ◽  
Cyclic Hardening ◽  
Local Deformation ◽  
Hardening Model ◽  
Creep Fatigue ◽  
Creep Fatigue Crack

Abstract In this study, to determine appropriate cyclic hardening model for simulating creep-fatigue crack growth, sensitivity of hardening model on global/local deformation behavior during creep-fatigue crack growth is studied using finite element (FE) debonding analysis method. Three hardening models derived from tensile stress-strain curve to treat large strain near crack are considered in this study: isotropic hardening model, kinematic hardening model and combined hardening model. Simulation results indicate that cyclic hardening model does not make large difference in global deformation behavior but make difference in local deformation behavior. The effect of hardening model on inelastic strain and stress near crack are discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document