scholarly journals Ground Rules in Forensic Interviews: Should We Make Practice More Applied?

2021 ◽  
Author(s):  
Kelly Lawrence

<p>Introducing ground rules is recommended in many forensic interview best-practice protocols, but children do not always use them when they should. There is not yet a consensus in the literature on the best way to teach the rules, and many of the practice methods researched are not feasible for practitioners. Additionally, increased intensity of practice can lead to adverse effects on other aspects of child testimony too. We draw on cognitive learning literature to understand how to better facilitate ground rule use amongst children in forensic interviews. Ninety-three children between the ages of 5-12 from Greater Wellington region, New Zealand, participated in a staged event at their school and were interviewed using the National Institute of Child Health and Human Development (NICHD) Protocol (Lamb et al., 2018) 2-3 weeks later. At the interview, children practised the ground rules ‘I don’t know’ (IDK), ‘I don’t understand’ (IDU) and ‘Correct me’ (CM) in one of four ways which varied by the degree of match between the practice and interview context. Children were asked difficult questions designed to elicit the rules throughout the interview, and coding children’s accuracy of reporting also examined the broader effects of practice method and rule use. No significant effects were found between the practice method and responses to difficult questions for the IDK and CM rules. The Control condition, which received no ground rules instruction or practice, was significantly different to the other practice conditions for the IDU rule. In addition to this, there was no significant effect of practice method or competency at using ground rules on children’s general accuracy about the event. Several possible explanations for this pattern of results are explored in the discussion section.</p>

2021 ◽  
Author(s):  
Kelly Lawrence

<p>Introducing ground rules is recommended in many forensic interview best-practice protocols, but children do not always use them when they should. There is not yet a consensus in the literature on the best way to teach the rules, and many of the practice methods researched are not feasible for practitioners. Additionally, increased intensity of practice can lead to adverse effects on other aspects of child testimony too. We draw on cognitive learning literature to understand how to better facilitate ground rule use amongst children in forensic interviews. Ninety-three children between the ages of 5-12 from Greater Wellington region, New Zealand, participated in a staged event at their school and were interviewed using the National Institute of Child Health and Human Development (NICHD) Protocol (Lamb et al., 2018) 2-3 weeks later. At the interview, children practised the ground rules ‘I don’t know’ (IDK), ‘I don’t understand’ (IDU) and ‘Correct me’ (CM) in one of four ways which varied by the degree of match between the practice and interview context. Children were asked difficult questions designed to elicit the rules throughout the interview, and coding children’s accuracy of reporting also examined the broader effects of practice method and rule use. No significant effects were found between the practice method and responses to difficult questions for the IDK and CM rules. The Control condition, which received no ground rules instruction or practice, was significantly different to the other practice conditions for the IDU rule. In addition to this, there was no significant effect of practice method or competency at using ground rules on children’s general accuracy about the event. Several possible explanations for this pattern of results are explored in the discussion section.</p>


Author(s):  
Andreia F. Paiva ◽  
Adam Nolan ◽  
Charlotte Thumser ◽  
Flavia H. Santos

Abstract: Background and Aims: Screening and assessment of cognitive changes in adults with Intellectual Disabilities, mainly Down Syndrome (DS), is crucial to offer appropriate services to their needs. We present a systematic review of the existing instruments assessing dementia, aiming to support researchers and clinicians’ best practice. Methods: Searches were carried out in the databases Web of Science; PubMed; PsycINFO in March 2019 and updated in May 2020. Studies were selected and examined if they: (1) focused on assessing age-related cognitive changes in person with ID; (2) included adults and/or older adults; (3) included scales and batteries for cognitive assessment. Results: Forty-eight cross-sectional studies and twenty-six longitudinal studies were selected representing a total sample of 5,851 participants (4,089 DS and 1,801 with other ID). In those studies, we found 38 scales, questionnaires, and inventories, and 13 batteries for assessing cognitive and behavioural changes in adults with DS and other ID. Conclusion: The most used instrument completed by an informant or carer was the Dementia Questionnaire for Learning Disabilities (DLD), and its previous versions. We discuss the strengths and limitations of the instruments and outline recommendations for future use.


2016 ◽  
Vol 43 (7) ◽  
pp. 599 ◽  
Author(s):  
Jordan O. Hampton ◽  
Timothy H. Hyndman ◽  
Michael Laurence ◽  
Andrew L. Perry ◽  
Peter Adams ◽  
...  

Increased scrutiny of animal welfare in wildlife management has seen a recent proliferation in the use of procedural documents (standard operating procedures, codes of practice etc.). Some procedural documents are presumed to represent ‘best practice’ methods, whereby adherence to prescribed inputs is explicitly purported to generate humane outcomes. However, the relationship between what is done to animals (inputs) and what they experience (outputs), as assessed by animal-based measures, has received little attention. Procedural documents are commonly developed in the absence of empirical animal-based measures, creating uncertainty in animal welfare outcomes. Prescribed procedures are valuable as guidelines for standardising methodology, but the development of ‘welfare standards’ that focus on desired thresholds for animal-based measures offers many advantages for improving animal welfare. Refinement of the use of procedural documents in wildlife management is required to ensure they generate desirable outcomes for animals, and do not preclude the development of improved methods.


2021 ◽  
Author(s):  
Jamie Dorey ◽  
Georgy Rassadkin ◽  
Douglas Ridgway

Abstract The field experience in the continental US suggests that approximately 33% of plug and abandonment operations are non-routine, and 5% require re-entry (Greer C.R., 2018). In some scenarios, the most cost-efficient option for the intervention is drilling an intercept well to re-enter the target well or multiple wells externally using advanced survey management and magnetic ranging techniques. This paper presents the methods applied of relief well methodologies from the planning to execution of a complex multiple-well abandonment project. Improvements in Active Magnetic Ranging sensor design and applications have improved the availability of highly precise tools for the purpose of locating and intercepting wellbores where access is not possible. These instruments were commonplace on relief well interventions, however, have found a new application in solving one of the major issues facing the oil and gas industry. Subsurface abandonments are a complex task that requires a robust methodology. In this paper, we describe the techniques that have been built upon the best practices from industry experience (ISCWSA WISC eBook). This paper also illustrates how the combination of advanced survey management, gyro surveying, and magnetic ranging can be used following the best industry practices for fast and cost-efficient non-routine plug and abandonment. Case studies of several abandonment projects are presented showing the various technical challenges which are common on idle and legacy wells. The projects include wells that are currently under the ownership of an operator and orphaned wells that have been insufficiently abandoned and left idle over many decades. The case studies outline how the application of relief well methodologies to the execution of complex sub surface interventions led to the successful outcomes of meeting environmental and government regulations for wellbore abandonment. This includes performing multiple zonal isolations between reservoirs, water zones and preventing oil and gas seepage to the surface. The projects and their outcomes prove economically viable strategies for tackling the growing issue of idle and orphaned wells globally in a fiscally responsible manner. Combining industry best practice methods for relief well drilling, along with the technological advancements in magnetic ranging systems is a solution for one of the largest dilemmas facing the oil and gas industry in relation to idle and orphaned wellbores. These applications allow previously considered impossible abandonments to be completed with a high probability of long-term success in permanent abandonment.


2020 ◽  
pp. 215-246
Author(s):  
James Bennett ◽  
Gerard Gould

In this chapter on life-threatening thoracic problems in anaesthesia, the authors offer their guidance and expertise on the best-practice methods of dealing with each of these. These problems include tracheal/bronchial obstruction, inhaled foreign body, tracheal injury or laceration, bronchopleural fistula, hypoxia/pneumothorax/high airway pressure during one-lung ventilation, dynamic hyperinflation, cardiac herniation postpneumonectomy, major airway bleeding, and bleeding during mediastinoscopy. In addition, the definitions, presentation, management strategies, investigations, risk factors, exclusions and causes, and any special considerations for each potential thoracically related situation are given and elaborated upon. Lists of up-to-date online resources and further reading are also provided here, offering invaluable know-how to encourage the reader to broaden their knowledge.


2019 ◽  
Vol 8 (8) ◽  
pp. 1201 ◽  
Author(s):  
Michael R. Skilton ◽  
David S. Celermajer ◽  
Erich Cosmi ◽  
Fatima Crispi ◽  
Samuel S. Gidding ◽  
...  

Atherosclerosis underlies most myocardial infarctions and ischemic strokes. The timing of onset and the rate of progression of atherosclerosis differ between individuals and among arterial sites. Physical manifestations of atherosclerosis may begin in early life, particularly in the abdominal aorta. Measurement of the abdominal aortic intima-media thickness by external ultrasound is a non-invasive methodology for quantifying the extent and severity of early atherosclerosis in children, adolescents, and young adults. This review provides an evidence-based rationale for the assessment of abdominal aortic intima-media thickness—particularly as an age-appropriate methodology for studying the natural history of atherosclerosis in the young in comparison to other methodologies—establishes best practice methods for assessing abdominal aortic intima-media thickness, and identifies key gaps in the literature, including those that will identify the clinical relevance of this measure.


Author(s):  
Gianlorenzo Bucchieri ◽  
Massimo Galbiati ◽  
Daniele Coutandin ◽  
Stefano Zecchi

This paper addresses the methodology used to design the layout of the tip cooling nozzles of a high pressure rotor blade turbine. The methodology used is through a complete CAE approach, by means of a parametric CFD model which is run several times for the exploration of several designs by an optimizer. Hence the design is carried out automatically by parallel computations, with the optimization algorithms taking the decisions rather than the design engineer. The engineer instead takes decision regarding the physical settings of the CFD model to employ, the number and the extension of the geometrical parameters of the blade tip holes and the optimization algorithms to be employed. From CFD validation the final design of the tip cooling geometry found by the optimizer has proved to be better than the base design, which used mean values of all input parameters, and than the design proposed by an experienced heat transfer AVIO engineer, who used standard best practice methods. Furthermore the large number of experiences gained by the simulations run by the optimizer allowed the designer to find laws, functions and correlation between input parameters and performance output, with a further and deeper insight on this specific design problem.


Sign in / Sign up

Export Citation Format

Share Document