scholarly journals Reliability analysis of a complex repairable system in series configuration with switch and catastrophic failure using copula repair

2015 ◽  
Vol 799-800 ◽  
pp. 1035-1039
Author(s):  
Ahmad Fauzi Fudzin ◽  
Mohd Amin Abd Majid

Robot arrangement in the automotive assembly plant in manufacturing environment consists of series and parallel configurations. Robot subsystems at painting lines were configured in series configuration while overall system was configured in parallel. Interruption of operations due to breakdown at both subsystems during operation would affect the production throughput. The robots’ breakdown data for each subsystem were acquired for reliability analysis of parallel-serial configuration of robots. This study is to analyze the serial subsystems robot reliability compared to reliability of robots in overall system in parallel-serial configuration. The seven years actual breakdown data were acquired from the automotive painting plant. By using the reliability block diagram (RBD) method, at the 5000 operating hours, the two subsystems at the painting lines were evaluated. Reliability of the two subsystems are 0.029 and 0.119 respectively. While the overall parallel-serial system has the reliability of 0.145. It is proven that the parallel-serial reliability of the system is better compared to series configuration of the subsystems. With parallel-serial system, the production line would not be interrupted during the corrective or preventive maintenance worked.


2015 ◽  
Vol 32 (7) ◽  
pp. 2505-2517 ◽  
Author(s):  
Xiao-jian Yi ◽  
B.S. Dhillon ◽  
Jian Shi ◽  
Hui-na Mu ◽  
Hai-ping Dong

2014 ◽  
Vol 38 (24) ◽  
pp. 6075-6097 ◽  
Author(s):  
Wenqing Wu ◽  
Yinghui Tang ◽  
Miaomiao Yu ◽  
Ying Jiang

2017 ◽  
Vol 170 (3) ◽  
pp. 66-72
Author(s):  
Jerzy MERKISZ ◽  
Łukasz RYMANIAK

The article discusses the possibility of determining the environmental indicators for vehicles of different categories in relation to CO2 emissions. These are called toxicity indicators because they concern the compounds: CO, THC and NOx. Three Euro V compliant vehicles with different propulsion systems types were used for the study: a 0.9 dm3 urban passenger car with a SI engine and a start-stop system, a 2.5 dm3 off-road vehicle with a CI engine, and a city bus with a hybrid drive system in series configuration and a CI engine with a displacement of 6.7 dm3. Measurements were made in actual operating conditions in the Poznan agglomeration using a portable emissions measurement system (PEMS). The paper presents the characteristics of the operating time shares of vehicles and propulsion systems as well as CO2 emissions depending on the engine load and crankshaft rotational speed for individual vehicles. The determined toxicity indicators allowed to indicate their usefulness, to make comparisons between tested vehicles, and to identify directions for further work on the application and interpretation of these indicators.


Author(s):  
R. MARCELLI ◽  
F. GIACOMOZZI ◽  
B. MARGESIN ◽  
G. BARTOLUCCI ◽  
G. MINUCCI

Sign in / Sign up

Export Citation Format

Share Document