scholarly journals An Analogue Experiment on Pervious Concrete Subject to Dust Fall Blocking

2018 ◽  
Vol 4 (5) ◽  
pp. 949 ◽  
Author(s):  
Qijian Lin ◽  
Liang Choufu

Increased urbanization comes with increased traffic volume which gradually decrease the draining effect of porous asphalt concrete through porosity blocking. This study aims to discuss clogging as a result of dust or sand and the subsequent changes at the permeability function after rainfall. Four groups of pervious concrete mixtures were prepared. Aggregates were coarse and fine bottom ashes from the refuse incinerator. Prior to conducting the experiments, the permeability in the groups ranged from 1399.75 ~ 1412.91 ml/15sec. We adopted the 2011 average monthly dust fall in Pingtung County and magnified it by 10 and 20 times to simulate natural dust fall and clump dust fall on the pavement. Ruling out other factors, our results suggest that natural dust fall has little influence on the water permeability of pervious concrete. Water permeability was reduced sharply when the natural dust fall was increased 15 times. Moreover, it never surpassed the 400 ml/15sec minimum of the Japanese porous pavement technical indicator.

2014 ◽  
Vol 26 (6) ◽  
pp. 1811-1815 ◽  
Author(s):  
Zhongyuan Li ◽  
Jie Yang ◽  
Shaobo Li ◽  
Xinyi Xu ◽  
Hanzhi Song

2000 ◽  
Vol 5 ◽  
pp. 96-102
Author(s):  
Satoshi KURODA ◽  
Yoshiteru KATO ◽  
Yasuo GUNJI

2010 ◽  
Vol 24 (7) ◽  
pp. 1207-1213 ◽  
Author(s):  
Quantao Liu ◽  
Erik Schlangen ◽  
Álvaro García ◽  
Martin van de Ven

2019 ◽  
Vol 4 (1) ◽  
pp. 12 ◽  
Author(s):  
Ethan Ellingboe ◽  
Jay Arehart ◽  
Wil Srubar

Pervious concrete, which has recently found new applications in buildings, is both energy- and carbon-intensive to manufacture. However, similar to normal concrete, some of the initial CO2 emissions associated with pervious concrete can be sequestered through a process known as carbonation. In this work, the theoretical formulation and application of a mathematical model for estimating the carbon dioxide (CO2) sequestration potential of pervious concrete is presented. Using principles of cement and carbonation chemistry, the model related mixture proportions of pervious concretes to their theoretical in situ CO2 sequestration potential. The model was subsequently employed in a screening life cycle assessment (LCA) to quantify the percentage of recoverable CO2 emissions—namely, the ratio of in situ sequesterable CO2 to initial cradle-to-gate CO2 emissions—for common pervious concrete mixtures. Results suggest that natural carbonation can recover up to 12% of initial CO2 emissions and that CO2 sequestration potential is maximized for pervious concrete mixtures with (i) lower water-to-cement ratios, (ii) higher compressive strengths, (iii) lower porosities, and (iv) lower hydraulic conductivities. However, LCA results elucidate that mixtures with maximum CO2 sequestration potential (i.e., mixtures with high cement contents and CO2 recoverability) emit more CO2 from a net-emissions perspective, despite their enhanced in situ CO2 sequestration potential.


Sign in / Sign up

Export Citation Format

Share Document