Study on insulation and stresses of TBCs on a turbine vane under ununiform temperature field

Numerical Investigation of the Three-Dimensional Temperature Field in the Near Hole Region of a Film Cooled Turbine Vane

Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration ◽

10.1115/90-gt-062 ◽

1990 ◽

Author(s):

X. Coudray

Keyword(s):

Temperature Field ◽

Film Cooling ◽

Thermal Environment ◽

Physical Phenomenon ◽

Turbine Blades ◽

Three Dimensional ◽

Internal Boundary ◽

Surface Distribution ◽

Film Cooling Effectiveness ◽

Turbine Vane

The increased severity of the thermal environment of high pressure turbine blades and vanes requires accurate calculations for the successful design of these parts. In this paper, the prediction of the temperature field in the near-cooling-hole region on a film cooled turbine vane is presented. The surface distribution of the heat transfer coefficient and the film cooling effectiveness on the vane in presence of one or several film cooling injections is obtained from boundary layer calculations and via experimental correlations. Cooling jet coalescence is taken into account as well as the main parameters governing this physical phenomenon. The internal boundary conditions result from available correlations. The study was conducted on two different configurations : a flat plate including an injection through two rows of holes and a turbine vane including three injections through two rows of holes on the suction side. Thermal computations using a three-dimensional finite element code yield strong temperature distortions and high temperature gradients around the injection zones. The study also indicates that the three-dimensional temperature field just downstream of the injections becomes two-dimensional when jet coalescence takes place. The influence of one or several obstructed injection holes on the temperature field is studied; important effects are observed when the main flow temperature is high.

Download Full-text

Characteristics and Application of Temperature-Field Emitters

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100114347 ◽

1975 ◽

Vol 33 ◽

pp. 144-145

Author(s):

N. Tamura ◽

T. Goto ◽

Y. Harada

Keyword(s):

Temperature Field ◽

Electron Microscope ◽

Field Emission ◽

Resolving Power ◽

High Brightness ◽

Field Emitters ◽

Emission Electron ◽

Sufficient Stability ◽

Scanning Electron ◽

Illuminating System

On account of its high brightness, the field emission electron source has the advantage that it provides the conventional electron microscope with highly coherent illuminating system and that it directly improves the, resolving power of the scanning electron microscope. The present authors have reported some results obtained with a 100 kV field emission electron microscope.It has been proven, furthermore, that the tungsten emitter as a temperature field emission source can be utilized with a sufficient stability under a modest vacuum of 10-8 ~ 10-9 Torr. The present paper is concerned with an extension of our study on the characteristics of the temperature field emitters.

Download Full-text

Multiple-fracturing and viewing of the same frozen sample at different depths using a low temperature FESEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100166567 ◽

1996 ◽

Vol 54 ◽

pp. 820-821

Author(s):

M.V. Parthasarathy ◽

C. Daugherty

Keyword(s):

Temperature Field ◽

Low Temperature ◽

Field Emission ◽

Multiple Fracture ◽

Precise Control ◽

Cold Stage ◽

Different Depths ◽

Transfer Device

The versatility of Low Temperature Field Emission SEM (LTFESEM) for viewing frozen-hydrated biological specimens, and the high resolutions that can be obtained with such instruments have been well documented. Studies done with LTFESEM have been usually limited to the viewing of small organisms, organs, cells, and organelles, or viewing such specimens after fracturing them.We use a Hitachi 4500 FESEM equipped with a recently developed BAL-TEC SCE 020 cryopreparation/transfer device for our LTFESEM studies. The SCE 020 is similar in design to the older SCU 020 except that instead of having a dedicated stage, the SCE 020 has a detachable cold stage that mounts on to the FESEM stage when needed. Since the SCE 020 has a precisely controlled lock manipulator for transferring the specimen table from the cryopreparation chamber to the cold stage in the FESEM, and also has a motor driven microtome for precise control of specimen fracture, we have explored the feasibility of using the LTFESEM for multiple-fracture studies of the same sample.

Download Full-text