Investigation into the impact of sub-populations of agglomerates on the particle size distribution and flow properties of conventional microcrystalline cellulose grades

2010 ◽  
Vol 16 (5) ◽  
pp. 542-548 ◽  
Author(s):  
John F. Gamble ◽  
Wing-Sin Chiu ◽  
Mike Tobyn
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Microcrystalline Cellulose ◽  
Flow Properties ◽  
The Impact

scholarly journals Green Preparation, Spheroidal, and Superior Property of Nano-1,3,5,7-Tetranittro-1,3,5,7-Tetrazocane

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Xinlei Jia ◽  
Jingyu Wang ◽  
Conghua Hou ◽  
Yingxin Tan
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Fractal Dimension ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Fractal Theory ◽  
Crystal Form ◽  
Decomposition Temperature ◽  
Scanning Calorimetry ◽  
The Impact

Herein, a green process for preparing nano-HMX, mechanical demulsification shearing (MDS) technology, was developed. Nano-HMX was successfully fabricated via MDS technology without using any chemical reagents, and the fabrication mechanism was proposed. Based on the “fractal theory,” the optimal shearing time for mechanical emulsification was deduced by calculating the fractal dimension of the particle size distribution. The as-prepared nano-HMX was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). And the impact sensitivities of HMX particles were contrastively investigated. The raw HMX had a lower fractal dimension of 1.9273. The ideal shearing time was 7 h. The resultant nano-HMX possessed a particle size distribution ranging from 203.3 nm to 509.1 nm as compared to raw HMX. Nano-HMX particles were dense spherical, maintaining β-HMX crystal form. In addition, they had much lower impact sensitivity. However, the apparent activation energy as well as thermal decomposition temperature of nano-HMX particles was decreased, attributing to the reduced probability for hotspot generation. Especially when the shearing time was 7 h, the activation energy was markedly decreased.

Mechanism of the Impact of Particle Size Distribution to Bed-Inventory Overturn for Pant-Leg Circulating Fluidized Bed

2013 ◽  
Vol 90 (4) ◽  
pp. 885-895 ◽  
Author(s):  
Jining Sun ◽  
Zhe Wang ◽  
Weiyu Cao ◽  
Haihang Wu ◽  
Zheng Li ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Fluidized Bed ◽  
Circulating Fluidized Bed ◽  
The Impact

scholarly journals Relationship between Particle Size Distribution of Low-Rank Pulverized Coal and Power Plant Performance

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Rajive Ganguli ◽  
Sukumar Bandopadhyay
Keyword(s):  
Particle Size ◽  
Power Plant ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Power Plants ◽  
Pulverized Coal ◽  
Plant Performance ◽  
Low Rank ◽  
Volatile Content ◽  
The Impact

The impact of particle size distribution (PSD) of pulverized, low rank high volatile content Alaska coal on combustion related power plant performance was studied in a series of field scale tests. Performance was gauged through efficiency (ratio of megawatt generated to energy consumed as coal), emissions (SO2,NOx, CO), and carbon content of ash (fly ash and bottom ash). The study revealed that the tested coal could be burned at a grind as coarse as 50% passing 76 microns, with no deleterious impact on power generation and emissions. The PSD’s tested in this study were in the range of 41 to 81 percent passing 76 microns. There was negligible correlation between PSD and the followings factors: efficiency, SO2,NOx, and CO. Additionally, two tests where stack mercury (Hg) data was collected, did not demonstrate any real difference in Hg emissions with PSD. The results from the field tests positively impacts pulverized coal power plants that burn low rank high volatile content coals (such as Powder River Basin coal). These plants can potentially reduce in-plant load by grinding the coal less (without impacting plant performance on emissions and efficiency) and thereby, increasing their marketability.

Sign in / Sign up

Export Citation Format

Share Document