scholarly journals Convective heat transfer in microchannels with varying flow cross-section

2019 ◽  
Author(s):  
◽  
Kai Xian Cheng
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Cross Section ◽  
Convective Heat ◽  
Flow Cross Section ◽  
Flow Cross

On the Convective Heat Transfer in a Tube of Elliptic Cross Section Maintained Under Constant Wall Temperature

1986 ◽  
Vol 108 (1) ◽  
pp. 33-39 ◽  
Author(s):  
M. A. Ebadian ◽  
H. C. Topakoglu ◽  
O. A. Arnas
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Temperature Distribution ◽  
Convective Heat Transfer ◽  
Cross Section ◽  
Convective Heat ◽  
Wall Temperature ◽  
Elliptic Cross Section ◽  
Constant Wall Temperature ◽  
Elliptic Cross

The convective heat transfer problem along the portion of a tube of elliptic cross section maintained under a constant wall temperature where hydrodynamically and thermally fully developed flow conditions prevail is solved in this paper. The successive approximation method is used for the solution utilizing elliptic coordinates. Analytical expressions for temperature distribution and Nusselt number corresponding to the first cycle of approximation are obtained in terms of the ellipticity of the cross section. In the case of a circular section, the first cycle approximation of the Nusselt number is obtained as 3.7288 compared to the exact value of 3.6568. Representative temperature distribution curves are plotted and compared to those corresponding with constant wall heat flux conditions.

Convective Heat Transfer in Elliptical Microchannels Under Slip Flow Regime and H1 Boundary Conditions

2015 ◽  
Vol 138 (4) ◽  
Author(s):  
Pamela Vocale ◽  
Gian Luca Morini ◽  
Marco Spiga
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Boundary Conditions ◽  
Convective Heat Transfer ◽  
Cross Section ◽  
Convective Heat ◽  
Slip Flow ◽  
The Cross ◽  
Cross Section Geometry

In this work, hydrodynamically and thermally fully developed gas flow through elliptical microchannels is numerically investigated. The Navier–Stokes and energy equations are solved by considering the first-order slip flow boundary conditions and by assuming that the wall heat flux is uniform in the axial direction, and the wall temperature is uniform in the peripheral direction (i.e., H1 boundary conditions). To take into account the microfabrication of the elliptical microchannels, different heated perimeter lengths are analyzed along the microchannel wetted perimeter. The influence of the cross section geometry on the convective heat transfer coefficient is also investigated by considering the most common values of the elliptic aspect ratio, from a practical point of view. The numerical results put in evidence that the Nusselt number is a decreasing function of the Knudsen number for all the considered configurations. On the contrary, the role of the cross section geometry in the convective heat transfer depends on the thermal boundary condition and on the rarefaction degree. With the aim to provide a useful tool for the designer, a correlation that allows evaluating the Nusselt number for any value of aspect ratio and for different working gases is proposed.

Thermal effect of LD end-pumped laser crystal with circular cross-section based on convective heat-transfer model

2012 ◽  
Vol 38 (1) ◽  
pp. 89-92
Author(s):  
李健 LI Jian ◽  
乔焱 QIAO Yan ◽  
崔伟 CUI Wei ◽  
董浩然 DONG Haoran ◽  
毕学进 BI Xuejin
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Thermal Effect ◽  
Cross Section ◽  
Convective Heat ◽  
Laser Crystal ◽  
Circular Cross Section ◽  
Heat Transfer Model ◽  
Transfer Model

Natural Convective Heat Transfer From an Isothermal Vertical Square Cylinder Mounted on a Flat Adiabatic Base

2008 ◽  
Author(s):  
Patrick H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Cross Section ◽  
Convective Heat ◽  
Vertical Cylinder ◽  
Base Plate ◽  
Cylinder Surface ◽  
Vertical Side ◽  
Study Results ◽  
Wide Range

Natural convective heat transfer from an isothermal vertical cylinder with a square cross-section which has an exposed horizontal top surface has been numerically studied. The exposed upper surface is maintained at the same temperature as the vertical walls of the cylinder. The cylinder is mounted on a flat horizontal adiabatic base plate. The interest in this situation stems from the fact that it is an approximate model of some electrical component cooling situations. The flow has been assumed to be steady and laminar and it has been assumed that the fluid properties are constant except for the density change with temperature which gives rise to the buoyancy forces, this having been treated by using the Boussinesq approach. The solution has been obtained by numerically solving the three-dimensional governing equations, these equations being written in terms of dimensionless variables. The numerical solution has been obtained using a commercial finite element method based code, FIDAP. The solution has the following parameters: the Rayleigh number, Ra, based on the height of the heated cylinder, h, and the overall temperature difference Tw − Tf, the dimensionless size of the square cross-section of the cylinder surface, W = w/h, w being the size of the cross-section, and the Prandtl number, Pr. Because of the applications that motivated this study, results have only been obtained for Pr = 0.7. A wide range of the other governing parameters has been considered. The conditions under which the heat transfer from the exposed upper surface can be neglected compared to that from the vertical side walls in the evaluation of the mean Nusselt number for the entire cylinder have been explored.

Sign in / Sign up

Export Citation Format

Share Document