scholarly journals Activity of Two Antimicrobial Peptides against Enterococcus faecalis in a Model of Biofilm-Mediated Endodontic Infection

Antibiotics ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 1220
Author(s):  
Giovanni Mergoni ◽  
Maddalena Manfredi ◽  
Pio Bertani ◽  
Tecla Ciociola ◽  
Stefania Conti ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Laser Scanning ◽  
Opportunistic Infections ◽  
Early Stage ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Biofilm Inhibition ◽  
Endodontic Infection ◽  
Viable Bacteria ◽  
Biofilm Development

Enterococcus faecalis is a common cause of biofilm-associated opportunistic infections, which are often difficult to treat. The formation of E. faecalis biofilms on the dentinal walls of the root canal is frequently the cause of endodontic treatment failure and secondary apical periodontitis. In a preliminary work, two recognized antifungal peptides, KP and L18R, showed antibacterial activity against planktonic E. faecalis cells at micromolar concentrations. Moreover, L18R proved to reduce the biomass in the early stage of E. faecalis biofilm development on polystyrene plates, while a qualitative biofilm inhibition was demonstrated on hydroxyapatite disks by confocal laser scanning microscopy (CLSM). The aim of this study was to better characterize the effect of both peptides on E. faecalis biofilm. A reduction in metabolic activity after peptide treatment was detected by Alamar Blue assay, while a remarkable impairment in the architecture of E. faecalis biofilms on hydroxyapatite disks, along with a significant reduction in viable bacteria, was caused mostly by L18R, as assessed by CLSM and scanning electron microscopy. The lack of cytotoxicity of the investigated peptides against L929 murine fibroblasts was also determined. Obtained results suggest L18R as a promising candidate for the development of new strategies for endodontic infection control.

scholarly journals Engineering of Injectable Antibiotic-laden Fibrous Microparticles Gelatin Methacryloyl Hydrogel for Endodontic Infection Ablation

2022 ◽  
Vol 23 (2) ◽  
pp. 971
Author(s):  
Juliana S. Ribeiro ◽  
Eliseu A. Münchow ◽  
Ester A. F. Bordini ◽  
Nathalie S. Rodrigues ◽  
Nileshkumar Dubey ◽  
...  
Keyword(s):  
Cell Viability ◽  
Laser Scanning ◽  
Morphological Characterization ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Biofilm Inhibition ◽  
Endodontic Infection ◽  
Significant Toxicity ◽  
Viable Bacteria ◽  
Hydrogel Swelling

This study aimed at engineering cytocompatible and injectable antibiotic-laden fibrous microparticles gelatin methacryloyl (GelMA) hydrogels for endodontic infection ablation. Clindamycin (CLIN) or metronidazole (MET) was added to a polymer solution and electrospun into fibrous mats, which were processed via cryomilling to obtain CLIN- or MET-laden fibrous microparticles. Then, GelMA was modified with CLIN- or MET-laden microparticles or by using equal amounts of each set of fibrous microparticles. Morphological characterization of electrospun fibers and cryomilled particles was performed via scanning electron microscopy (SEM). The experimental hydrogels were further examined for swelling, degradation, and toxicity to dental stem cells, as well as antimicrobial action against endodontic pathogens (agar diffusion) and biofilm inhibition, evaluated both quantitatively (CFU/mL) and qualitatively via confocal laser scanning microscopy (CLSM) and SEM. Data were analyzed using ANOVA and Tukey’s test (α = 0.05). The modification of GelMA with antibiotic-laden fibrous microparticles increased the hydrogel swelling ratio and degradation rate. Cell viability was slightly reduced, although without any significant toxicity (cell viability > 50%). All hydrogels containing antibiotic-laden fibrous microparticles displayed antibiofilm effects, with the dentin substrate showing nearly complete elimination of viable bacteria. Altogether, our findings suggest that the engineered injectable antibiotic-laden fibrous microparticles hydrogels hold clinical prospects for endodontic infection ablation.

scholarly journals Differential Lipopolysaccharide Core Capping Leads to Quantitative and Correlated Modifications of Mechanical and Structural Properties in Pseudomonas aeruginosa Biofilms

2009 ◽  
Vol 191 (21) ◽  
pp. 6618-6631 ◽  
Author(s):  
Peter C. Y. Lau ◽  
Theresa Lindhout ◽  
Terry J. Beveridge ◽  
John R. Dutcher ◽  
Joseph S. Lam
Keyword(s):  
Mechanical Properties ◽  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Structural Changes ◽  
Early Stage ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Bacterial Biofilms ◽  
Microbial Infections ◽  
Biofilm Development

ABSTRACT Bacterial biofilms are responsible for the majority of all microbial infections and have profound impact on industrial and geochemical processes. While many studies documented phenotypic differentiation and gene regulation of biofilms, the importance of their structural and mechanical properties is poorly understood. Here we investigate how changes in lipopolysaccharide (LPS) core capping in Pseudomonas aeruginosa affect biofilm structure through modification of adhesive, cohesive, and viscoelastic properties at an early stage of biofilm development. Microbead force spectroscopy and atomic force microscopy were used to characterize P. aeruginosa biofilm interactions with either glass substrata or bacterial lawns. Using isogenic migA, wapR, and rmlC mutants with defined LPS characteristics, we observed significant changes in cell mechanical properties among these strains compared to wild-type strain PAO1. Specifically, truncation of core oligosaccharides enhanced both adhesive and cohesive forces by up to 10-fold, whereas changes in instantaneous elasticity were correlated with the presence of O antigen. Using confocal laser scanning microscopy to quantify biofilm structural changes with respect to differences in LPS core capping, we observed that textural parameters varied with adhesion or the inverse of cohesion, while areal and volumetric parameters were linked to adhesion, cohesion, or the balance between them. In conclusion, this report demonstrated for the first time that changes in LPS expression resulted in quantifiable cellular mechanical changes that were correlated with structural changes in bacterial biofilms. Thus, the interplay between architectural and functional properties may be an important contributor to bacterial community survival.

scholarly journals Use of electromagnetic stimulation on an Enterococcus faecalis biofilm on root canal treated teeth in vitro

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Beatriz H. D. Panariello ◽  
Justin K. Kindler ◽  
Kenneth J. Spolnik ◽  
Ygal Ehrlich ◽  
George J. Eckert ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Root Canal ◽  
Laser Scanning ◽  
Confocal Imaging ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microscopy Imaging ◽  
Electromagnetic Stimulation ◽  
Root Canal Disinfection

AbstractRoot canal disinfection is of utmost importance in the success of the treatment, thus, a novel method for achieving root canal disinfection by electromagnetic waves, creating a synergistic reaction via electric and thermal energy, was created. To study electromagnetic stimulation (EMS) for the disinfection of root canal in vitro, single rooted teeth were instrumented with a 45.05 Wave One Gold reciprocating file. Specimens were sterilized and inoculated with Enterococcus faecalis ATCC 29,212, which grew for 15 days to form an established biofilm. Samples were treated with 6% sodium hypochlorite (NaOCl), 1.5% NaOCl 1.5% NaOCl with EMS, 0.9% saline with EMS or 0.9% saline. After treatments, the colony forming units (CFU) was determined. Data was analyzed by Wilcoxon Rank Sums Test (α = 0.05). One sample per group was scored and split for confocal laser scanning microscopy imaging. There was a significant effect with the use of NaOCl with or without EMS versus 0.9% saline with or without EMS (p = 0.012 and 0.003, respectively). CFUs were lower when using 0.9% saline with EMS versus 0.9% saline alone (p = 0.002). Confocal imaging confirmed CFU findings. EMS with saline has an antibiofilm effect against E. faecalis and can potentially be applied for endodontic disinfection.

scholarly journals Repurposing Napabucasin as an Antimicrobial Agent against Oral Streptococcal Biofilms

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Xinyi Kuang ◽  
Tao Yang ◽  
Chenzi Zhang ◽  
Xian Peng ◽  
Yuan Ju ◽  
...  
Keyword(s):  
Dental Caries ◽  
Laser Scanning ◽  
Antibacterial Activities ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Oral Streptococci ◽  
Oral Keratinocytes ◽  
Microbial Composition ◽  
Biofilm Inhibition ◽  
Multispecies Biofilms

Objectives. Disruption of microbial biofilms is an effective way to control dental caries. Drug resistance and side effects of the existing antimicrobials necessitate the development of novel antibacterial agents. The current study was aimed at investigating the antibacterial activities of the repurposed natural compound napabucasin against oral streptococci. Methods. The minimum inhibitory concentration, minimum bactericidal concentration, minimum biofilm inhibition concentration, and minimum biofilm reduction concentration of Streptococcus mutans, Streptococcus gordonii, and Streptococcus sanguinis were examined by a microdilution method. Cytotoxicity of napabucasin against human oral keratinocytes, human gingival epithelia, and macrophage RAW264.7 was evaluated by CCK8 assays. The dead/live bacterium and exopolysaccharide in the napabucasin-treated multispecies biofilms were evaluated by confocal laser scanning microscopy. Microbial composition within the napabucasin-treated biofilms was further visualized by fluorescent in situ hybridization and qPCR. And the cariogenicity of napabucasin-treated biofilms was evaluated by transverse microradiography. Results. Napabucasin exhibited good antimicrobial activity against oral streptococcal planktonic cultures and biofilms but with lessened cytotoxicity as compared to chlorhexidine. Napabucasin reduced the cariogenic S. mutans and increased the proportion of the commensal S. gordonii in the multispecies biofilms. More importantly, napabucasin significantly reduced the demineralization capability of biofilms on tooth enamels. Conclusion. Napabucasin shows lessened cytotoxicity and comparable antimicrobial effects to chlorhexidine. Repurposing napabucasin may represent a promising adjuvant for the management of dental caries.

scholarly journals Importance of Initial Interfacial Steps during Chalcopyrite Bioleaching by a Thermoacidophilic Archaeon

2020 ◽  
Vol 8 (7) ◽  
pp. 1009
Author(s):  
Camila Safar ◽  
Camila Castro ◽  
Edgardo Donati
Keyword(s):  
High Temperatures ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Copper Recovery ◽  
Confocal Laser ◽  
Mineral Surface ◽  
Thermophilic Microorganisms ◽  
Valuable Metals ◽  
Refractory Mineral ◽  
Biofilm Development

Studies of thermophilic microorganisms have shown that they have a considerable biotechnological potential due to their optimum growth and metabolism at high temperatures. Thermophilic archaea have unique characteristics with important biotechnological applications; many of these species could be used in bioleaching processes to recover valuable metals from mineral ores. Particularly, bioleaching at high temperatures using thermoacidophilic microorganisms can greatly improve metal solubilization from refractory mineral species such as chalcopyrite (CuFeS2), one of the most abundant and widespread copper-bearing minerals. Interfacial processes such as early cell adhesion, biofilm development, and the formation of passive layers on the mineral surface play important roles in the initial steps of bioleaching processes. The present work focused on the investigation of different bioleaching conditions using the thermoacidophilic archaeon Acidianus copahuensis DSM 29038 to elucidate which steps are pivotal during the chalcopyrite bioleaching. Fluorescent in situ hybridization (FISH) and confocal laser scanning microscopy (CLSM) were used to visualize the microorganism–mineral interaction. Results showed that up to 85% of copper recovery from chalcopyrite could be achieved using A. copahuensis. Improvements in these yields are intimately related to an early contact between cells and the mineral surface. On the other hand, surface coverage by inactivated cells as well as precipitates significantly reduced copper recoveries.

scholarly journals Bacterial lipopolysaccharides variably modulate in vitro biofilm formation of Candida species

2010 ◽  
Vol 59 (10) ◽  
pp. 1225-1234 ◽  
Author(s):  
H. M. H. N. Bandara ◽  
O. L. T. Lam ◽  
R. M. Watt ◽  
L. J. Jin ◽  
L. P. Samaranayake
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Significant Inhibition ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dependent Manner ◽  
Bacterial Lipopolysaccharides ◽  
Species Specific ◽  
Biofilm Development

The objective of this study was to evaluate the effect of the bacterial endotoxin LPS on Candida biofilm formation in vitro. The effect of the LPS of Pseudomonas aeruginosa, Klebsiella pneumoniae, Serratia marcescens and Salmonella typhimurium on six different species of Candida, comprising Candida albicans ATCC 90028, Candida glabrata ATCC 90030, Candida krusei ATCC 6258, Candida tropicalis ATCC 13803, Candida parapsilosis ATCC 22019 and Candida dubliniensis MYA 646, was studied using a standard biofilm assay. The metabolic activity of in vitro Candida biofilms treated with LPS at 90 min, 24 h and 48 h was quantified by XTT reduction assay. Viable biofilm-forming cells were qualitatively analysed using confocal laser scanning microscopy (CLSM), while scanning electron microscopy (SEM) was employed to visualize the biofilm structure. Initially, adhesion of C. albicans was significantly stimulated by Pseudomonas and Klebsiella LPS. A significant inhibition of Candida adhesion was noted for the following combinations: C. glabrata with Pseudomonas LPS, C. tropicalis with Serratia LPS, and C. glabrata, C. parapsilosis or C. dubliniensis with Salmonella LPS (P<0.05). After 24 h of incubation, a significant stimulation of initial colonization was noted for the following combinations: C. albicans/C. glabrata with Klebsiella LPS, C. glabrata/C. tropicalis/C. krusei with Salmonella LPS. In contrast, a significant inhibition of biofilm formation was observed in C. glabrata/C. dubliniensis/C. krusei with Pseudomonas LPS, C. krusei with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. parapsilosis/C. dubliniensis /C. krusei with Salmonella LPS (P<0.05). On further incubation for 48 h, a significant enhancement of biofilm maturation was noted for the following combinations: C. glabrata/C. tropicalis with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. glabrata with Salmonella LPS, and a significant retardation was noted for C. parapsilosis/C. dubliniensis/C. krusei with Pseudomonas LPS, C. tropicalis with Serratia LPS, C. glabrata/C. parapsilosis/C. dubliniensis with Klebsiella LPS and C. dubliniensis with Salmonella LPS (P<0.05). These findings were confirmed by SEM and CLSM analyses. In general, the inhibition of the biofilm development of LPS-treated Candida spp. was accompanied by a scanty architecture with a reduced numbers of cells compared with the profuse and densely colonized control biofilms. These data are indicative that bacterial LPSs modulate in vitro Candida biofilm formation in a species-specific and time-dependent manner. The clinical and the biological relevance of these findings have yet to be explored.

scholarly journals Microbial Composition and Structure of Aerobic Granular Sewage Biofilms

2007 ◽  
Vol 73 (19) ◽  
pp. 6233-6240 ◽  
Author(s):  
S. D. Weber ◽  
W. Ludwig ◽  
K.-H. Schleifer ◽  
J. Fried
Keyword(s):  
Activated Sludge ◽  
Laser Scanning ◽  
Extracellular Polymeric Substances ◽  
Phase 1 ◽  
Simultaneous Detection ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microbial Composition ◽  
Granule Formation ◽  
Biofilm Development

ABSTRACT Aerobic activated sludge granules are dense, spherical biofilms which can strongly improve purification efficiency and sludge settling in wastewater treatment processes. In this study, the structure and development of different granule types were analyzed. Biofilm samples originated from lab-scale sequencing batch reactors which were operated with malthouse, brewery, and artificial wastewater. Scanning electron microscopy, light microscopy, and confocal laser scanning microscopy together with fluorescence in situ hybridization (FISH) allowed insights into the structure of these biofilms. Microscopic observation revealed that granules consist of bacteria, extracellular polymeric substances (EPS), protozoa and, in some cases, fungi. The biofilm development, starting from an activated sludge floc up to a mature granule, follows three phases. During phase 1, stalked ciliated protozoa of the subclass Peritrichia, e.g., Epistylis spp., settle on activated sludge flocs and build tree-like colonies. The stalks are subsequently colonized by bacteria. During phase 2, the ciliates become completely overgrown by bacteria and die. Thereby, the cellular remnants of ciliates act like a backbone for granule formation. During phase 3, smooth, compact granules are formed which serve as a new substratum for unstalked ciliate swarmers settling on granule surfaces. These mature granules comprise a dense core zone containing bacterial cells and EPS and a loosely structured fringe zone consisting of either ciliates and bacteria or fungi and bacteria. Since granules can grow to a size of up to several millimeters in diameter, we developed and applied a modified FISH protocol for the study of cryosectioned biofilms. This protocol allows the simultaneous detection of bacteria, ciliates, and fungi in and on granules.

Alginate production affects Pseudomonas aeruginosa biofilm development and architecture, but is not essential for biofilm formation

2004 ◽  
Vol 53 (7) ◽  
pp. 679-690 ◽  
Author(s):  
Andres Plata Stapper ◽  
Giri Narasimhan ◽  
Dennis E. Ohman ◽  
Johnny Barakat ◽  
Morten Hentzer ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Fluorescent Protein ◽  
Cell System ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Alginate Production ◽  
Green Fluorescent ◽  
Biofilm Development

Extracellular polymers can facilitate the non-specific attachment of bacteria to surfaces and hold together developing biofilms. This study was undertaken to qualitatively and quantitatively compare the architecture of biofilms produced by Pseudomonas aeruginosa strain PAO1 and its alginate-overproducing (mucA22) and alginate-defective (algD) variants in order to discern the role of alginate in biofilm formation. These strains, PAO1, Alg+ PAOmucA22 and Alg− PAOalgD, tagged with green fluorescent protein, were grown in a continuous flow cell system to characterize the developmental cycles of their biofilm formation using confocal laser scanning microscopy. Biofilm Image Processing (bip) and Community Statistics (comstat) software programs were used to provide quantitative measurements of the two-dimensional biofilm images. All three strains formed distinguishable biofilm architectures, indicating that the production of alginate is not critical for biofilm formation. Observation over a period of 5 days indicated a three-stage development pattern consisting of initiation, establishment and maturation. Furthermore, this study showed that phenotypically distinguishable biofilms can be quantitatively differentiated.

Sign in / Sign up

Export Citation Format

Share Document