scholarly journals A Novel Approach of Studying the Fluid–Structure–Thermal Interaction of the Piston–Cylinder Interface of Axial Piston Pumps

2021 ◽  
Vol 11 (19) ◽  
pp. 8843
Author(s):  
Junjie Zhou ◽  
Tianrui Li ◽  
Dongyun Wang
Keyword(s):  
Friction Force ◽  
Measurement Data ◽  
Fluid Film ◽  
Fluid Viscosity ◽  
Thermal Interaction ◽  
Fluid Structure ◽  
Axial Piston Pumps ◽  
Piston Cylinder ◽  
Novel Approach ◽  
Axial Piston

The friction in the swash plate type axial piston pumps is mainly influenced by the fluid film in the friction interface. The piston–cylinder interface is one of the key friction interfaces in the pumps. The film geometry is determined by the gap between the piston and the cylinder. The dimensions of the parts determine the gap geometry, and the deformation of the structure also influences the gap geometry. The fluid viscosity is strongly influenced by temperature. Thus, a novel approach of studying the fluid film, the structure, and temperature interaction is provided in this paper. A full and quick fluid–structure–thermal interaction simulation is realized. Then, a dynamic model of the piston–cylinder interface, which integrated the fluid–structure–thermal interacting effects, has been developed. Finally, an approach for calculating the extra friction force between the piston and the cylinder is provided. Compared with the measurement data, the simulation results of the axial friction force achieve a good fit. The present work allows a fast prediction and detailed support for designing the piston–cylinder interfaces.

Heat Transfer and Thermal Elastic Deformation Analysis on the Piston/Cylinder Interface of Axial Piston Machines

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Matteo Pelosi ◽  
Monika Ivantysynova
Keyword(s):  
Heat Transfer ◽  
Temperature Distribution ◽  
Elastic Deformation ◽  
Hydrodynamic Lubrication ◽  
Operating Conditions ◽  
Fluid Film ◽  
Design Elements ◽  
Piston Cylinder ◽  
Viscous Shear ◽  
Axial Piston

The piston/cylinder interface of swash plate–type axial piston machines represents one of the most critical design elements for this type of pump and motor. Oscillating pressures and inertia forces acting on the piston lead to its micro-motion, which generates an oscillating fluid film with a dynamically changing pressure distribution. Operating under oscillating high load conditions, the fluid film between the piston and cylinder has simultaneously to bear the external load and to seal the high pressure regions of the machine. The fluid film interface physical behavior is characterized by an elasto-hydrodynamic lubrication regime. Additionally, the piston reciprocating motion causes fluid film viscous shear, which contributes to a significant heat generation. Therefore, to fully comprehend the piston/cylinder interface fluid film behavior, the influences of heat transfer to the solid boundaries and the consequent solid boundaries’ thermal elastic deformation cannot be neglected. In fact, the mechanical bodies’ complex temperature distribution represents the boundary for nonisothermal fluid film flow calculations. Furthermore, the solids-induced thermal elastic deformation directly affects the fluid film thickness. To analyze the piston/cylinder interface behavior, considering the fluid-structure interaction and thermal problems, the authors developed a fully coupled simulation model. The algorithm couples different numerical domains and techniques to consider all the described physical phenomena. In this paper, the authors present in detail the computational approach implemented to study the heat transfer and thermal elastic deformation phenomena. Simulation results for the piston/cylinder interface of an existing hydrostatic unit are discussed, considering different operating conditions and focusing on the influence of the thermal aspect. Model validation is provided, comparing fluid film boundary temperature distribution predictions with measurements taken on a special test bench.

Measurment of fluid film thickness on the valve plate in oil hydraulic axial piston pumps (Part II: Spherical design effects)

2005 ◽  
Vol 19 (2) ◽  
pp. 655-663 ◽  
Author(s):  
Jiong-Ki Kim ◽  
Hyoung-Eui Kim ◽  
Yong-Bum Lee ◽  
Jae-Youn Jung ◽  
Seok-Hyung Oh
Keyword(s):  
Film Thickness ◽  
Valve Plate ◽  
Fluid Film ◽  
Spherical Design ◽  
Axial Piston Pumps ◽  
Design Effects ◽  
Fluid Film Thickness ◽  
Axial Piston

Surface Deformations Enable High Pressure Operation of Axial Piston Pumps

2011 ◽  
Author(s):  
Matteo Pelosi ◽  
Monika Ivantysynova
Keyword(s):  
Film Thickness ◽  
Material Properties ◽  
Fluid Film ◽  
Cylinder Block ◽  
Steel Cylinder ◽  
Elastic Deformations ◽  
Piston Cylinder ◽  
Fluid Film Thickness ◽  
The Impact ◽  
Axial Piston

In this paper, a fully coupled fluid-structure interaction and thermal numerical model developed by the authors is used to demonstrate the impact of surface elastic deformations on the piston/cylinder fluid film thickness and on the overall axial piston pump rotating kit performance. The piston/cylinder interface is one of the most critical lubricating interfaces of axial piston machines. This interface fulfills simultaneously a bearing and sealing function under oscillating load conditions in a purely hydrodynamic regime. It represents one of the main sources of energy dissipation and it is therefore a key design element, determining axial piston machine efficiency. In the past years, the research group of the authors studied the impact of advanced micro surface design and fluid film thickness micro alteration in the piston/cylinder interface through extensive simulations and experiments. However, the numerical models used did not include the influence of surface elastic deformations, heat transfer and therefore material properties on the piston/cylinder interface behavior. Hence, the aim of this paper is to show the alterations on fluid film thickness and on the consequent coupled physical parameters due to the solid boundaries pressure and thermal surface elastic deformations. A simulation study considering two different material properties for the cylinder bores is performed, where a steel cylinder block and a steel cylinder block with brass bushings are separately studied. Piston/cylinder gap pressure field and coupled gap surface elastic deformations due to pressure and thermal loading are shown for the different materials. The impact of the different materials behavior on lubricating interface performance is discussed.

scholarly journals A Numerical Study on Influence of Temperature on Lubricant Film Characteristics of the Piston/Cylinder Interface in Axial Piston Pumps

Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1842 ◽  
Author(s):  
Yueheng Song ◽  
Jiming Ma ◽  
Shengkui Zeng
Keyword(s):  
Thermal Effect ◽  
Contact Time ◽  
Numerical Study ◽  
Lubricant Film ◽  
Piston Pump ◽  
Pump Efficiency ◽  
Axial Piston Pumps ◽  
Piston Cylinder ◽  
Film Characteristics ◽  
Axial Piston

The loss of kinetic energy of moving parts due to viscous friction of lubricant causes the reduction of piston pump efficiency. The viscosity of lubricant film is mainly affected by the thermal effect. In order to improve energy efficiency of piston pump, this research presents a numerical method to analyze the lubricant film characteristics in axial piston pumps, considering the thermal effect by the coupled multi-disciplinary model, which includes the fluid flow field expressed by Reynolds equation, temperature field expressed by energy equation and heat transfer equation, kinematics expressed by the motion equation. The velocity and temperature distributions of the gap flow of piston/cylinder interface in steady state are firstly numerically computed. Then the distributions are validated by the experiment. Finally, by changing the thermal boundary condition, the influence of thermal effect on the lubricant film, the eccentricity and the contact time between the piston and cylinder are analyzed. Results show that with the increase of temperature, the contact time increases in the form of a hyperbolic tangent function, which will reduce the efficiency of the axial piston pump. There is a critical temperature beyond which the contact time will increase rapidly, thus this temperature is the considered as a key point for the temperature design.

Research on wear prediction of piston/cylinder pair in axial piston pumps

Wear ◽  
2020 ◽  
Vol 456-457 ◽  
pp. 203338 ◽  
Author(s):  
Fei Lyu ◽  
Junhui Zhang ◽  
Guangming Sun ◽  
Bing Xu ◽  
Min Pan ◽  
...  
Keyword(s):  
Wear Prediction ◽  
Axial Piston Pumps ◽  
Piston Cylinder ◽  
Axial Piston
Sign in / Sign up

Export Citation Format

Share Document