scholarly journals The Effect of Collagen-I Coatings of 3D Printed PCL Scaffolds for Bone Replacement on Three Different Cell Types

2021 ◽  
Vol 11 (22) ◽  
pp. 11063
Author(s):  
Lucas Weingärtner ◽  
Sergio H. Latorre ◽  
Dirk Velten ◽  
Anke Bernstein ◽  
Hagen Schmal ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Type I Collagen ◽  
Testing Machine ◽  
Cell Types ◽  
The Body ◽  
Type I ◽  
Human Tissues ◽  
Cytotoxicity Studies ◽  
Cell Scaffold ◽  
Different Cell Types

Introduction The use of scaffolds in tissue engineering is becoming increasingly important as solutions need to be found to preserve human tissues such as bone or cartilage. Various factors, including cells, biomaterials, cell and tissue culture conditions, play a crucial role in tissue engineering. The in vivo environment of the cells exerts complex stimuli on the cells, thereby directly influencing cell behavior, including proliferation and differentiation. Therefore, to create suitable replacement or regeneration procedures for human tissues, the conditions of the cells’ natural environment should be well mimicked. Therefore, current research is trying to develop 3-dimensional scaffolds (scaffolds) that can elicit appropriate cellular responses and thus help the body regenerate or replace tissues. In this work, scaffolds were printed from the biomaterial polycaprolactone (PCL) on a 3D bioplotter. Biocompatibility testing was used to determine whether the printed scaffolds were suitable for use in tissue engineering. Material and Methods An Envisiontec 3D bioplotter was used to fabricate the scaffolds. For better cell-scaffold interaction, the printed polycaprolactone scaffolds were coated with type-I collagen. Three different cell types were then cultured on the scaffolds and various tests were used to investigate the biocompatibility of the scaffolds. Results Reproducible scaffolds could be printed from polycaprolactone. In addition, a coating process with collagen was developed, which significantly improved the cell-scaffold interaction. Biocompatibility tests showed that the PCL-collagen scaffolds are suitable for use with cells. The cells adhered to the surface of the scaffolds and as a result extensive cell growth was observed on the scaffolds. The inner part of the scaffolds, however, remained largely uninhabited. In the cytotoxicity studies, it was found that toxicity below 20% was present in some experimental runs. The determination of the compressive strength by means of the universal testing machine Z005 by ZWICK according to DIN EN ISO 604 of the scaffolds resulted in a value of 68.49 ± 0.47 MPa.

scholarly journals Separate cis-acting DNA elements of the mouse pro-alpha 1(I) collagen promoter direct expression of reporter genes to different type I collagen-producing cells in transgenic mice.

1995 ◽  
Vol 129 (5) ◽  
pp. 1421-1432 ◽  
Author(s):  
J Rossert ◽  
H Eberspaecher ◽  
B de Crombrugghe
Keyword(s):  
Transgenic Mice ◽  
Type I Collagen ◽  
Cell Types ◽  
Proximal Promoter ◽  
Type I ◽  
High Level Expression ◽  
Cis Acting ◽  
High Level ◽  
Different Cell Types ◽  
Beta Galactosidase

The genes coding for the two type I collagen chains, which are active selectively in osteoblasts, odontoblasts, fibroblasts, and some mesenchymal cells, constitute good models for studying the mechanisms responsible for the cell-specific activity of genes which are expressed in a small number of discrete cell types. To test whether separate genetic elements could direct the activity of the mouse pro-alpha 1(I) collagen gene to different cell types in which it is expressed, transgenic mice were generated harboring various fragments of the proximal promoter of this gene cloned upstream of the Escherichia coli beta-galactosidase gene. During embryonic development, X-gal staining allows for the precise identification of the different cell types in which the beta-galactosidase gene is active. Transgenic mice harboring 900 bp of the pro-alpha 1(I) proximal promoter expressed the transgene at relatively low levels almost exclusively in skin. In mice containing 2.3 kb of this proximal promoter, the transgene was also expressed at high levels in osteoblasts and odontoblasts, but not in other type I collagen-producing cells. Transgenic mice harboring 3.2 kb of the proximal promoter showed an additional high level expression of the transgene in tendon and fascia fibroblasts. The pattern of expression of the lacZ transgene directed by the 0.9- and 2.3-kb pro-alpha 1(I) proximal promoters was confirmed by using the firefly luciferase gene as a reporter gene. The pattern of expression of this transgene, which can be detected even when it is active at very low levels, paralleled that of the beta-galactosidase gene. These data strongly suggest a modular arrangement of separate cell-specific cis-acting elements that can activate the mouse pro-alpha(I) collagen gene in different type I collagen-producing cells. At least three different types of cell-specific elements would be located in the first 3.2 kb of the promoter: (a) an element that confers low level expression in dermal fibroblasts; (b) a second that mediates high level expression in osteoblasts and odontoblasts; and (c) one responsible for high level expression in tendon and fascia fibroblasts. Our data also imply that other cis-acting cell-specific elements which direct activity of the gene to still other type I collagen-producing cells remain to be identified.

Mutations responsible for MYH9-related thrombocytopenia impair SDF-1-driven migration of megakaryoblastic cells

2011 ◽  
Vol 106 (10) ◽  
pp. 693-704 ◽  
Author(s):  
Valeria Bozzi ◽  
Emanuele Panza ◽  
Serena Barozzi ◽  
Cristian Gruppi ◽  
Marco Seri ◽  
...  
Keyword(s):  
Type I Collagen ◽  
Cell Types ◽  
Type I ◽  
Wild Type ◽  
Mutant Proteins ◽  
Wild Type Counterpart ◽  
Platelet Release ◽  
Myosin Iia ◽  
Different Cell Types

SummaryMYH9-related disease (MYH9-RD) is an autosomal-dominant thrombocytopenia caused by mutations in the gene for the heavy chain of nonmuscle myosin-IIA (NMMHC-IIA). Recent in vitro studies led to the hypothesis that thrombocytopenia of MYH9-RD derives from an ectopic platelet release by megakaryocytes in the osteoblastic areas of bone marrow (BM), which are enriched in type I collagen, rather than in vascular spaces. SDF-1-driven migration of megakaryocytes within BM to reach the vascular spaces is a key mechanism for platelet biogenesis. Since myosin-IIA is implicated in polarised migration of different cell types, we hypothesised that MYH9 mutations could interfere with this mechanism. We therefore investigated the SDF-1-driven migration of a megakaryoblastic cell line, Dami cells, on type I collagen or fibrinogen by a modified transwell assay. Inhibition of myosin-IIA ATPase activity suppressed the SDF-1-driven migration of Dami cells, while over-expression of NMMHC-IIA increased the efficiency of chemotaxis, indicat- ing a role for NMMHC-IIA in this mechanism. Transfection of cells with three MYH9 mutations frequently responsible for MYH9-RD (p.R702C, p.D1424H, or p.R1933X) resulted in a defective SDF-1-driven migration with respect to the wild-type counterpart and in increased cell spreading onto collagen. Analysis of differential localisation of wild-type and mutant proteins suggested that mutant NMMHC-IIAs had an impaired cytoplasmic re-organisation in functional cytoskeletal structures after cell adhesion to collagen. These findings support the hypothesis that a defect of SDF-1-driven migration of megakaryocytes induced by MYH9 mutations contributes to ectopic platelet release in the BM osteoblastic areas, resulting in ineffective platelet production.

scholarly journals A thermoreversible, photocrosslinkable collagen bio-ink for free-form fabrication of scaffolds for regenerative medicine

TECHNOLOGY ◽  
2017 ◽  
Vol 05 (04) ◽  
pp. 185-195 ◽  
Author(s):  
Kathryn E. Drzewiecki ◽  
Juilee N. Malavade ◽  
Ijaz Ahmed ◽  
Christopher J. Lowe ◽  
David I. Shreiber
Keyword(s):  
Tissue Engineering ◽  
Regenerative Medicine ◽  
Self Assembly ◽  
Type I Collagen ◽  
The Body ◽  
Free Form ◽  
Type I ◽  
Freeze Dried ◽  
Good Pattern ◽  
Further Development

As a biomaterial, collagen has been used throughout tissue engineering and regenerative medicine. Collagen is native to the body, is highly biocompatible, and naturally promotes cell adhesion and regeneration. However, collagen fibers and the inherent weak mechanical properties of collagen hydrogels interfere with further development of collagen as a bio-ink. Herein, we demonstrate the use of a modified type-I collagen, collagen methacrylamide (CMA), as a fibril-forming bio-ink for free-form fabrication of scaffolds. Like collagen, CMA can self-assemble into a fibrillar hydrogel at physiological conditions. In contrast, CMA is photocrosslinkable and thermoreversible, and photocrosslinking eliminates thermoreversibility. Free-form fabrication of CMA was performed through self-assembly of the CMA hydrogel, photocrosslinking the structure of interest using a photomask, and cooling the entire hydrogel, which results in cold-melting of unphotocrosslinked regions. Printed hydrogels had a resolution on the order of [Formula: see text]350[Formula: see text][Formula: see text]m, and can be fabricated with or without cells and maintain viability or be further processed into freeze-dried sponges, all while retaining pattern fidelity. A subcutaneous implant study confirmed the biocompatibility of CMA in comparison to collagen. Free-form fabrication of CMA allows for printing of macroscale, customized scaffolds with good pattern fidelity and can be implemented with relative ease for continued research and development of collagen-based scaffolds in tissue engineering.

scholarly journals Collagen-Based Electrospun Materials for Tissue Engineering: A Systematic Review

2021 ◽  
Vol 8 (3) ◽  
pp. 39
Author(s):  
Britani N. Blackstone ◽  
Summer C. Gallentine ◽  
Heather M. Powell
Keyword(s):  
Systematic Review ◽  
Tissue Engineering ◽  
Collagen Type I ◽  
The Body ◽  
Pool Data ◽  
Type I ◽  
High Concentrations ◽  
Increased Strength

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.

Tissue Engineering of Bone by Osteoinductive Biomaterials

MRS Bulletin ◽  
1996 ◽  
Vol 21 (11) ◽  
pp. 36-39 ◽  
Author(s):  
Ugo Ripamonti ◽  
Nicolaas Duneas
Keyword(s):  
Tissue Engineering ◽  
Bone Formation ◽  
Type I Collagen ◽  
Demineralized Bone Matrix ◽  
Bone Matrix ◽  
Mesenchymal Cells ◽  
Tissue Response ◽  
Type I ◽  
New Bone Formation ◽  
Demineralized Bone

Recent advances in materials science and biotechnology have given birth to the new and exciting field of tissue engineering, in which the two normally disparate fields are merging into a profitable matrimony. In particular the use of biomaterials capable of initiating new bone formation via a process called osteoinduction is leading to quantum leaps for the tissue engineering of bone.The classic work of Marshall R. Urist and A. Hari Reddi opened the field of osteoinductive biomaterials. Urist discovered that, upon implantation of devitalized, demineralized bone matrix in the muscle of experimental animals, new bone formation occurs within two weeks, a phenomenon he described as bone formation by induction. The tissue response elicited by implantation of demineralized bone matrix in muscle or under the skin includes activation and migration of undifferentiated mesenchymal cells by chemotaxis, anchoragedependent cell attachment to the matrix, mitosis and proliferation of mesenchymal cells, differentiation of cartilage, mineralization of the cartilage, vascular invasion of the cartilage, differentiation of osteoblasts and deposition of bone matrix, and finally mineralization of bone and differentiation of marrow in the newly developed ossicle.The osteoinductive ability of the extracellular matrix of bone is abolished by the dissociative extraction of the demineralized matrix, but is recovered when the extracted component, itself inactive, is reconstituted with the inactive residue—mainly insoluble collagenous bone matrix. This important experiment showed that the osteoinductive signal resides in the solubilized component but needs to be reconstituted with an appropriate carrier to restore the osteoinductive activity. In this case, the carrier is the insoluble collagenous bone matrix—mainly crosslinked type I collagen.

scholarly journals PERITONEAL ADHESIONS TYPE I, III AND TOTAL COLLAGEN ON POLYPROPYLENE AND COATED POLYPROPYLENE MESHES: EXPERIMENTAL STUDY IN RATS

2017 ◽  
Vol 30 (2) ◽  
pp. 77-82 ◽  
Author(s):  
Lucas Félix ROSSI ◽  
Manoel Roberto Maciel TRINDADE ◽  
Armando José D`ACAMPORA ◽  
Luise MEURER
Keyword(s):  
Type I Collagen ◽  
Cell Types ◽  
Type Iii Collagen ◽  
Type I ◽  
Abdominal Adhesions ◽  
Peritoneal Adhesions ◽  
Type Iii ◽  
Total Collagen

ABSTRACT Background: Hernia correction is a routinely performed treatment in surgical practice. The improvement of the operative technique and available materials certainly has been a great benefit to the quality of surgical results. The insertion of prostheses for hernia correction is well-founded in the literature, and has become the standard of treatment when this type of disease is discussed. Aim: To evaluate two available prostheses: the polypropylene and polypropylene coated ones in an experimental model. Methods: Seven prostheses of each kind were inserted into Wistar rats (Ratus norvegicus albinus) in the anterior abdominal wall of the animal in direct contact with the viscera. After 90 days follow-up were analyzed the intra-abdominal adhesions, and also performed immunohistochemical evaluation and videomorphometry of the total, type I and type III collagen. Histological analysis was also performed with hematoxylin-eosin to evaluate cell types present in each mesh. Results: At 90 days the adhesions were not different among the groups (p=0.335). Total collagen likewise was not statistically different (p=0.810). Statistically there was more type III collagen in the coated polypropylene group (p=0.039) while type I was not different among the prostheses (p=0.050). The lymphocytes were statistically more present in the polypropylene group (p=0.041). Conclusion: The coated prosthesis was not different from the polypropylene one regarding the adhesion. Total and type I collagen were not different among the groups, while type III collagen was more present on the coated mesh. There was a greater number of lymphocytes on the polypropylene mesh.

Tissue engineering of dental pulp on type I collagen

2004 ◽  
Vol 29 (4) ◽  
pp. 370
Author(s):  
Gwang-Hee Lee ◽  
Sung-Yoon Huh ◽  
Sang-Hyuk Park
Keyword(s):  
Tissue Engineering ◽  
Dental Pulp ◽  
Type I Collagen ◽  
Type I

scholarly journals Cryo-Electron Microscopy Structure and Interactions of the Human Cytomegalovirus gHgLgO Trimer with Platelet-Derived Growth Factor Receptor Alpha

mBio ◽  
2021 ◽  
Vol 12 (5) ◽  
Author(s):  
Jing Liu ◽  
Adam Vanarsdall ◽  
Dong-Hua Chen ◽  
Andrea Chin ◽  
David Johnson ◽  
...  
Keyword(s):  
Birth Defects ◽  
Adult Population ◽  
Growth Factor Receptor ◽  
Cell Types ◽  
The Body ◽  
Platelet Derived Growth Factor ◽  
Cryo Electron Microscopy ◽  
Factor Receptor Alpha ◽  
Complex Protein ◽  
Different Cell Types

HCMV is a herpesvirus that infects a large percentage of the adult population and causes significant levels of disease in immunocompromised individuals and birth defects in the developing fetus. The virus encodes a complex protein machinery that coordinates infection of different cell types in the body, including a trimer formed of gH, gL, and gO subunits.

Regulation of collagen I gene expression by ras

1992 ◽  
Vol 12 (10) ◽  
pp. 4714-4723
Author(s):  
J L Slack ◽  
M I Parker ◽  
V R Robinson ◽  
P Bornstein
Keyword(s):  
Type I Collagen ◽  
The Body ◽  
Transformed Cells ◽  
Type I ◽  
Mrna Levels ◽  
Oncogenic Ras ◽  
Genes Encoding ◽  
Flanking Region ◽  
Collagen Genes ◽  
I Gene

Although transformation of rodent fibroblasts can lead to dramatic changes in expression of extracellular matrix genes, the molecular basis and physiological significance of these changes remain poorly understood. In this study, we have investigated the mechanism(s) by which ras affects expression of the genes encoding type I collagen. Levels of both alpha 1(I) and alpha 2(I) collagen mRNAs were markedly reduced in Rat 1 fibroblasts overexpressing either the N-rasLys-61 or the Ha-rasVal-12 oncogene. In fibroblasts conditionally transformed with N-rasLys-61, alpha 1(I) transcript levels began to decline within 8 h of ras induction and reached 1 to 5% of control levels after 96 h. In contrast, overexpression of normal ras p21 had no effect on alpha 1(I) or alpha 2(I) mRNA levels. Nuclear run-on experiments demonstrated that the transcription rates of both the alpha 1(I) and alpha 2(I) genes were significantly reduced in ras-transformed cells compared with those in parental cells. In addition, the alpha 1(I) transcript was less stable in transformed cells. Chimeric plasmids containing up to 3.6 kb of alpha 1(I) 5'-flanking DNA and up to 2.3 kb of the 3'-flanking region were expressed at equivalent levels in both normal and ras-transformed fibroblasts. However, a cosmid clone containing the entire mouse alpha 1(I) gene, including 3.7 kb of 5'- and 4 kb of 3'-flanking DNA, was expressed at reduced levels in fibroblasts overexpressing oncogenic ras. We conclude that oncogenic ras regulates the type I collagen genes at both transcriptional and posttranscriptional levels and that this effect, at least for the alpha 1(I) gene, may be mediated by sequences located either within the body of the gene itself or in the distal 3'-flanking region.

Infection and immunity

2021 ◽  
pp. 853-920
Keyword(s):  
Major Histocompatibility Complex ◽  
Immune System ◽  
Cell Types ◽  
The Body ◽  
Acquired Immunity ◽  
Histocompatibility Complex ◽  
Repair Mechanisms ◽  
Antigen Presenting ◽  
Different Cell Types

‘Infection and immunity’ considers the response of the body to pathogens, such as bacteria, viruses, prions, fungi, and parasites, which are discussed in terms of their nature, life cycle, and modes of infection. The role of the immune system in defence against infection is discussed, including innate and adaptive (acquired) immunity, antigens, the major histocompatibility complex, and the different cell types involved (antigen-presenting cells, T-cells, and B-cells). The mechanisms and cellular basis of inflammation are considered, as are post-infection repair mechanisms, and pathologies of the immune system such as hypersensitivity, autoimmunity and transplantations, and immunodeficiency (both primary and secondary to other diseases).

Sign in / Sign up

Export Citation Format

Share Document