scholarly journals Surface Preparation and Treatment for Large-Scale 3D-Printed Composite Tooling Coating Adhesion

Coatings ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 457 ◽  
Author(s):  
Philipp Sauerbier ◽  
James Anderson ◽  
Douglas Gardner
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Lower Cost ◽  
Numerical Control ◽  
Fused Deposition Modelling ◽  
Filler Materials ◽  
Coating Adhesion ◽  
Fused Deposition ◽  
Composite Tooling ◽  
3D Printed

Recent advances in large-scale thermoplastic additive manufacturing (AM), using fused deposition modelling (FDM), have shown that the technology can effectively produce large aerospace tools with common feed stocks, costing 2.3 $/kg, such as a 20% carbon-filled acrylonitrile butadiene styrene (ABS). Large-scale additive manufacturing machines have build-volumes in the range of cubic meters and use commercially available pellet feedstock thermoplastics, which are significantly cheaper (5–10 $/kg) than the filament feedstocks for desktop 3D printers (20–50 $/kg). Additionally, large-scale AM machines have a higher material throughput on the order of 50 kg/h. This enables the cost-efficient tool production for several industries. Large-scale 3D-printed tooling will be computerized numerical control (CNC)-machined and -coated, to provide a surface suitable for demolding the composite parts. This paper outlines research undertaken to review and improve the adhesion of the coating systems to large, low-cost AM composite tooling, for marine or infrastructure composite applications. Lower cost tooling systems typically have a lower dimensional accuracy and thermal operating requirements than might be required for aerospace tooling. As such, they can use lower cost commodity grade thermoplastics. The polymer systems explored in the study included polypropylene (PP), styrene-maleic anhydride (SMA), and polylactic acid (PLA). Bio-based filler materials were used to reduce cost and increase the strength and stiffness of the material. Fillers used in the study included wood flour, at 30% by weight and spray-dried cellulose nano-fibrils, at 20% by weight. Applicable adhesion of the coating was achieved with PP, after surface treatment, and untreated SMA and PLA showed desirable coating adhesion results. PLA wood-filled composites offered the best properties for the desired application and, furthermore, they have environment-friendly advantages.

scholarly journals Strength Comparison of FDM 3D Printed PLA Made by Different Manufacturers

TEM Journal ◽  
2020 ◽  
pp. 966-970
Author(s):  
Damir Hodžić ◽  
Adi Pandžić ◽  
Ismar Hajro ◽  
Petar Tasić
Keyword(s):  
Experimental Study ◽  
Additive Manufacturing ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Manufacturing Technique ◽  
Plastic Materials ◽  
Wide Range ◽  
3D Printed ◽  
The Difference ◽  
Printing Parameters

Widely used additive manufacturing technique for plastic materials is Fused Deposition Modelling (FDM). The FDM technology has gained interest in industry for a wide range of applications, especially today when large number of different materials on the market are available. There are many different manufacturers for the same FDM material where the difference in price goes up to 50%. This experimental study investigates possible difference in strength of the 3D printed PLA material of five different manufacturers. All specimens are 3D printed on Ultimaker S5 printer with the same printing parameters, and they are all the same colour.

Use of polymer concrete for large-scale 3D printing

2021 ◽  
Vol 27 (3) ◽  
pp. 465-474
Author(s):  
Martin Krčma ◽  
David Škaroupka ◽  
Petr Vosynek ◽  
Tomáš Zikmund ◽  
Jozef Kaiser ◽  
...  
Keyword(s):  
3D Printing ◽  
Large Scale ◽  
Mechanical Performance ◽  
Construction Material ◽  
Polymer Concrete ◽  
Fused Deposition Modelling ◽  
Cast State ◽  
Content Type ◽  
Fused Deposition ◽  
3D Printed

Purpose This paper aims to focus on the evaluation of a polymer concrete as a three-dimensional (3D) printing material. An associated company has developed plastic concrete made from reused unrecyclable plastic waste. Its intended use is as a construction material. Design/methodology/approach The concrete mix, called PolyBet, composed of polypropylene and glass sand, is printed by the fused deposition modelling process. The process of material and parameter selection is described. The mechanical properties of the filled material were compared to its cast state. Samples were made from castings and two different orientations of 3D-printed parts. Three-point flex tests were carried out, and the area of the break was examined. Computed tomography of the samples was carried out. Findings The influence of the 3D printing process on the material was evaluated. The mechanical performance of the longitudinal samples was close to the cast state. There was a difference in the failure mode between the states, with cast parts exhibiting a tougher behaviour, with fractures propagating in a stair-like manner. The 3D-printed samples exhibited high degrees of porosity. Originality/value The results suggest that the novel material is a good fit for 3D printing, with little to no degradation caused by the process. Layer adhesion was shown to be excellent, with negligible effect on the finished part for the longitudinal orientation. That means, if large-scale testing of buildability is successful, the material is a good fit for additive manufacturing of building components and other large-scale structures.

scholarly journals Effect of Perforation Volume on Acoustic Absorption of the 3D Printed Micro-Perforated Panels made of Polylactic Acid reinforced with Wood Fibers

2021 ◽  
Vol 2120 (1) ◽  
pp. 012039
Author(s):  
V Sekar ◽  
S Y Eh Noum ◽  
S Sivanesan ◽  
A Putra ◽  
Dg H Kassim ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Polylactic Acid ◽  
Natural Fiber ◽  
Fused Deposition Modelling ◽  
Acoustic Absorption ◽  
Wood Fibers ◽  
Fused Deposition ◽  
3D Printed ◽  
Almost All ◽  
Impedance Tube Method

Abstract In recent times, Additive Manufacturing (AM) has been applied rapidly in almost all fields. This study was conducted to apply the additive manufacturing into an acoustic application by 3D printing the Micro-Perforated Panels (MPP) through Fused Deposition Modelling (FDM) made of Polylactic Acid (PLA) reinforced with wood fibers. MPP were fabricated by altering its perforation volume. Later, the effect of perforation volume on acoustic absorption of the fabricated MPP was measured using the two-microphone impedance tube method as per ISO 10534-2 standard. The result shows altering the perforation volume affects the acoustic absorption of the MPP. MPP with a thickness of 2 mm and a perforation diameter of 0.2 mm shows the maximum sound absorption coefficient of 0.93 at 2173 Hz. It is made possible to absorb the 3D printed MPP made of natural fiber reinforced composite at different spectrums by altering the perforation volume.

scholarly journals A design of experiment approach to 3D-printed mouthpieces sound analysis

2021 ◽  
Author(s):  
Antonio Bacciaglia ◽  
Alessandro Ceruti ◽  
Alfredo Liverani
Keyword(s):  
Additive Manufacturing ◽  
Design Of Experiment ◽  
Musical Instruments ◽  
Rapid Expansion ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Fused Deposition ◽  
3D Printed ◽  
Processing Techniques ◽  
Short Time

AbstractNowadays additive manufacturing is affected by a rapid expansion of possible applications. It is defined as a set of technologies that allow the production of components from 3D digital models in a short time by adding material layer by layer. It shows enormous potential to support wind musical instruments manufacturing because the design of complex shapes could produce unexplored and unconventional sounds, together with external customization capabilities. The change in the production process, material and shape could affect the resulting sound. This work aims to compare the music performances of 3D-printed trombone mouthpieces using both Fused Deposition Modelling and Stereolithography techniques, compared to the commercial brass one. The quantitative comparison is made applying a Design of Experiment methodology, to detect the main additive manufacturing parameters that affect the sound quality. Digital audio processing techniques, such as spectral analysis, cross-correlation and psychoacoustic analysis in terms of loudness, roughness and fluctuation strength have been applied to evaluate sounds. The methodology herein applied could be used as a standard for future studies on additively manufactured musical instruments.

scholarly journals Effects of In-Process Temperatures and Blending Polymers on Acrylonitrile Butadiene Styrene Blends

Inventions ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 93
Author(s):  
Muhammad Harris ◽  
Johan Potgieter ◽  
Hammad Mohsin ◽  
Karnika De Silva ◽  
Marie-Joo Le Guen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Large Scale ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
High Thermal Resistance ◽  
3D Printed ◽  
First Time ◽  
Butadiene Styrene

Acrylonitrile butadiene styrene (ABS) is a renowned commodity polymer for additive manufacturing, particularly fused deposition modelling (FDM). The recent large-scale applications of 3D-printed ABS require stable mechanical properties than ever needed. However, thermochemical scission of butadiene bonds is one of the contemporary challenges affecting the overall ABS stability. In this regard, literature reports melt-blending of ABS with different polymers with high thermal resistance. However, the comparison for the effects of different polymers on tensile strength of 3D-printed ABS blends was not yet reported. Furthermore, the cumulative studies comprising both blended polymers and in-process thermal variables for FDM were not yet presented as well. This research, for the first time, presents the statistical comparison of tensile properties for the added polymers and in-process thermal variables (printing temperature and build surface temperature). The research presents Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) to explain the thermochemical reasons behind achieved mechanical properties. Overall, ABS blend with PP shows high tensile strength (≈31 MPa) at different combinations of in-process parameters. Furthermore, some commonalities among both blends are noted, i.e., the tensile strength improves with increase of surface (bed) and printing temperature.

scholarly journals Surface Roughness Effect on the 3d Printed Butt Joints Strength

2015 ◽  
Author(s):  
V. Kovan ◽  
G. Altan ◽  
E.S. Topal ◽  
H.E. Camurlu
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Three Dimensional ◽  
Thickness Effect ◽  
Fused Deposition Modelling ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
3D Printed ◽  
Dimensional Object

Three-dimensional printing or 3D printing (also called additive manufacturing) is any of various processes used to make a three-dimensional object. Fused deposition modelling (FDM) is an additive manufacturing technology commonly used for modelling, prototyping, and production applications. It is one of the techniques used for 3D printing. FDM is somewhat restricted in the size and the variation of shapes that may be fabricated. For parts too large to fit on a single build, for faster job builds with less support material, or for parts with finer features, sectioning and bonding FDM parts is a great solution. The strength of adhesive bonded FDM parts is affected by the surface roughness. In this study, the layer thickness effect on bonding strength is experimentally studied and the results are discussed.

scholarly journals 3D printed fluidics with embedded analytic functionality for automated reaction optimisation

2017 ◽  
Vol 13 ◽  
pp. 111-119 ◽  
Author(s):  
Andrew J Capel ◽  
Andrew Wright ◽  
Matthew J Harding ◽  
George W Weaver ◽  
Yuqi Li ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Reaction Medium ◽  
Flow Chemistry ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Fluidic Devices ◽  
3D Printed ◽  
Solvent Systems ◽  
Temperature And Pressure ◽  
Set Up

Additive manufacturing or ‘3D printing’ is being developed as a novel manufacturing process for the production of bespoke micro- and milliscale fluidic devices. When coupled with online monitoring and optimisation software, this offers an advanced, customised method for performing automated chemical synthesis. This paper reports the use of two additive manufacturing processes, stereolithography and selective laser melting, to create multifunctional fluidic devices with embedded reaction monitoring capability. The selectively laser melted parts are the first published examples of multifunctional 3D printed metal fluidic devices. These devices allow high temperature and pressure chemistry to be performed in solvent systems destructive to the majority of devices manufactured via stereolithography, polymer jetting and fused deposition modelling processes previously utilised for this application. These devices were integrated with commercially available flow chemistry, chromatographic and spectroscopic analysis equipment, allowing automated online and inline optimisation of the reaction medium. This set-up allowed the optimisation of two reactions, a ketone functional group interconversion and a fused polycyclic heterocycle formation, via spectroscopic and chromatographic analysis.

scholarly journals Structural Integrity of Polymeric Components Produced by Additive Manufacturing (AM)—Polymer Applications

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4420
Author(s):  
Rui F. Martins ◽  
Ricardo Branco ◽  
Filippo Berto ◽  
Nuno Soares ◽  
Sebastião Bandeira
Keyword(s):  
Additive Manufacturing ◽  
Structural Integrity ◽  
Fused Deposition Modelling ◽  
Mass Reduction ◽  
The Finite Element Method ◽  
Fused Deposition ◽  
Major Constraint ◽  
3D Printed ◽  
Fit For Purpose ◽  
Functional Components

In the work presented herein, the structural integrity of polymeric functional components made of Nylon-645 and Polylactic acid (PLA) produced by additive manufacturing (Fused Deposition Modelling, FDM) is studied. The PLA component under study was selected from the production line of a brewing company, and it was redesigned and analyzed using the Finite Element Method, 3D printed, and installed under real service. The results obtained indicated that, even though the durability of the 3D printed part was lower than the original, savings of about EUR 7000 a year could be achieved for the component studied. Moreover, it was shown that widespread use of AM with other specific PLA components could result in even more significant savings. Additionally, a metallic hanger (2700 kg/m3) from the cockpit of an airplane ATR 70 series 500 was successfully redesigned and additively manufactured in Nylon 645, resulting in a mass reduction of approximately 60% while maintaining its fit-for-purpose. Therefore, the components produced by FDM were used as fully functional components rather than prototype models, which is frequently stated as a major constraint of the FDM process.

scholarly journals Sustainability in additive manufacturing: Exploring the mechanical potential of recycled PET filaments

2021 ◽  
Vol 30 ◽  
pp. 263498332110000
Author(s):  
Helge Schneevogt ◽  
Kevin Stelzner ◽  
Buket Yilmaz ◽  
Bilen Emek Abali ◽  
André Klunker ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Polyethylene Terephthalate ◽  
Mechanical Performance ◽  
Fused Deposition Modelling ◽  
Recycled Pet ◽  
Fused Deposition ◽  
Recycled Polyethylene ◽  
3D Printed ◽  
Sustainable Materials

Herein, the effects of recycled polymers on the mechanical properties of additively manufactured specimens, specifically those derived by fused deposition modelling, are determined. The intention is to investigate how 3D-printing can be more sustainable and how recycled polymers compare against conventional ones. Initially, sustainability is discussed in general and more sustainable materials such as recycled filaments and biodegradable filaments are introduced. Subsequently, a comparison of the recycled filament recycled Polyethylene terephthalate (rePET) and a conventional Polyethylene terephthalate with glycol (PETG) filament is drawn upon their mechanical performance under tension, and the geometry and slicing strategy for the 3D-printed specimens is discussed. Finally, the outcomes from the experiments are compared against numerically determined results and conclusions are drawn.

Sign in / Sign up

Export Citation Format

Share Document