scholarly journals A Comprehensive Method for Subsidence Prediction on Two-Seam Longwall Mining

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3139 ◽  
Author(s):  
Bin Zhang ◽  
Jiacheng Ye ◽  
Zhongjian Zhang ◽  
Liang Xu ◽  
Nengxiong Xu
Keyword(s):  
Longwall Mining ◽  
Underground Mining ◽  
Surface Subsidence ◽  
Orthogonal Experimental Design ◽  
Parameter Inversion ◽  
Subsidence Prediction ◽  
Reliable Assessment ◽  
Seam Mining ◽  
Subsidence Monitoring ◽  
Overlying Strata

The purpose of mining subsidence prediction is to establish a reliable assessment for surface subsidence resulting from underground mining. In this study, a new method for predicting subsidence in two-seam mining is proposed. First, the surface subsidence due to mining the upper seam is monitored. Then, taking the subsidence data as indicators, the optimal mechanical parameters of overlying strata can be obtained by orthogonal experimental design and inverse analysis of numerical simulation. Finally, further subsidence is calculated and predicted by the numerical model. A case of two-seam underground mining is studied using this methodology. This coal mine is located in the Dongsheng coal field in Inner Mongolia, China. Based on GPS surface subsidence monitoring and parameter inversion, the subsidence induced by two-seam mining is estimated and predicted. This study shows that the ratio of the height of overlying strata to mining thickness (H/M), mining configuration and adjacent mining have a significant effect on the surface subsidence caused by two-seam mining. By parameter inversion, the proposed optimal parameters can be applied to predict the subsidence of a nearby mine with similar stratigraphic conditions. Furthermore, this methodology can also be used to predict the subsidence caused by mining of more than two seams.

scholarly journals Control Technology of Surface Movement Scope with Directional Hydraulic Fracturing Technology in Longwall Mining: A Case Study

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3480 ◽  
Author(s):  
Zhanjie Feng ◽  
Wenbing Guo ◽  
Feiya Xu ◽  
Daming Yang ◽  
Weiqiang Yang
Keyword(s):  
Numerical Simulation ◽  
Hydraulic Fracturing ◽  
Longwall Mining ◽  
Numerical Models ◽  
Surface Subsidence ◽  
The Sustainable Development ◽  
Surface Movement ◽  
Directional Hydraulic Fracturing ◽  
Simulation Results ◽  
Overlying Strata

Mining-induced surface subsidence causes a series of environmental hazards and social problems, including farmland destruction, waterlogging and building damage in the subsidence area. To reduce mining damages, an innovative method of controlling the surface movement scope via artificial weak planes generated by hydraulic fracturing technology was proposed in this paper. Numerical models were built to analyze the influence of weak planes with different heights and dips on the overlying strata movement. The numerical simulation results showed that the weak planes structure cut off the development of the overlying strata displacement to the surface and affected the surface movement scope. When the weak planes’ dips were bigger than the angle of critical deformation, with the increase of the weak planes’ heights (0–120 m) the advance angle of influence changed from 53.61° to 59.15°, and the advance distance of influence changed from 173.31 m to 140.27 m which decreased by 30.04 m. In applications at Sihe coal mine in China, directional hydraulic fracturing technology was used in panel 5304 to form artificial weak planes in overlying strata. The measured surface subsidence and deformation value met the numerical simulation results and the mining-induced surface movement scope reduced. Moreover, no damage occurred to the surface buildings which were predicted to be in the affected area after extraction. This technology provided a new method to protect the surface structures from damages and had great benefits for the sustainable development of coal mines.

scholarly journals Surface Subsidence Prognosis above an Underground Longwall Excavation and Based on 3D Point Cloud Analysis

Minerals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 82 ◽  
Author(s):  
Andrej Pal ◽  
Janez Rošer ◽  
Milivoj Vulić
Keyword(s):  
Rock Mass ◽  
Longwall Mining ◽  
Underground Mining ◽  
Point Clouds ◽  
Surface Subsidence ◽  
Protection Measures ◽  
Engineering Research ◽  
3D Point Clouds ◽  
Research Activities ◽  
And Control

Impacts of underground mining have been reduced by continuous environmental endeavors, scientific, and engineering research activities, whose main object is the behavior and control of the undermined rock mass and the subsequent surface subsidence. In the presented Velenje case of underground sublevel longwall mining where coal is being exploited both horizontal and vertical, backfilling processes and accompanying fracturing in the coal layer, and rock mass are causing uncontrolled subsidence of the surface above. 3D point clouds of the study were acquired in ten epochs and at excavation heights on the front were measured at the same epochs. By establishing a sectors layout in the observational area, smaller point clouds were obtained, to which planes were fitted and centroids of these planes then calculated. Centroid heights were analyzed with the FNSE model to estimate the time of consolidation and modified according to excavation parameters to determine total subsidence after a certain period. Proposed prognosis approaches for estimating consolidation of active subsidence and long term surface environmental protection measures have been proposed and presented. The C2C analysis of distances between acquired 3D point clouds was used for identification of surface subsidence, reclamation areas and sink holes, and for validation of feasibility and effectiveness of the proposed prognosis.

Ground surface subsidence as effect of underground mining of the thick coal seams in the Jiu valley basin / Osiadanie gruntów wskutek wybierania pokładów o dużej miąższości w kopalniach zagłębia w dolinie Jiu

2012 ◽  
Vol 57 (3) ◽  
pp. 547-577 ◽  
Author(s):  
Ilie Onica ◽  
Dacian Marian
Keyword(s):  
Surface Deformation ◽  
Longwall Mining ◽  
Underground Mining ◽  
Ground Surface ◽  
Surface Subsidence ◽  
Coal Seams ◽  
Elasto Plasticity ◽  
Ground Surface Subsidence ◽  
Time Dependent Analysis

Abstract In the case of the thick and gentle coal seam no. 3 of the Jiu Valley Coal Basin (Romania), the mining methods are by use of the longwall mining technologies with roof control by caving or top coal caving. In this paper, it is presented the analysis of the complex deformations of the ground surface, over time, as a consequence of the coal mining in certain mining fields of the basin. Also, it is analysed the ground surface subsidence phenomenon using the CESAR-LCPC finite element code. The modelling is made in the elasticity and the elasto-plasticity behaviour hypothesis. Also, the time dependent analysis of the ground surface deformation was achieved with the aid of an especial profile function. The obtained results are compared with the in situ measurements data basis.

scholarly journals A novel approach of determining the parameters of Asadi profiling function for predictiong ground subsidence due to inclied coal seam mining at Quang Ninh coal basin

2020 ◽  
Vol 61 (2) ◽  
pp. 86-95
Author(s):  
Long Quoc Nguyen ◽  
Keyword(s):  
Underground Mining ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Ground Subsidence ◽  
Coal Basin ◽  
Novel Approach ◽  
Maximum Subsidence ◽  
Seam Mining ◽  
Subsidence Monitoring ◽  
Quang Ninh

In this paper, we proposed a novel approach for estimating preliminary values of parameters of the Asadi profiling function (APF), then the least-squares principle was used with these preliminary values and ground subsidence monitoring data at the Thong Nhat underground mine to determine to the final parameters of the APF. This function was employed to predict ground subsidence at the Mong Duong mine where there are geological and rock geomachenial conditions well as seams’ inclination similar to those of Thong Nhat mine. The results show that the Rood Mean Square Error (RMSE) and Mean Absolute Error (MAE) equal to 0.081 m and 0.055 m or 9.9% and 6.7% of maximum subsidence, respectively, and a correlation coefficient of 0.973. These results prove that the APF with calculated parameters can be used to predict ground subsidence due to underground mining in the areas that have the similar conditions to Thong Nhat mine.

scholarly journals Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Shengrong Xie ◽  
Xiaoyu Wu ◽  
Dongdong Chen ◽  
Yaohui Sun ◽  
Junchao Zeng ◽  
...  
Keyword(s):  
Longwall Mining ◽  
Control Process ◽  
Coal Pillar ◽  
Main Roof ◽  
Control Effect ◽  
Mining Technology ◽  
Thick Coal Seam ◽  
Immediate Roof ◽  
Seam Mining ◽  
And Control

Automatic roadways on gob-side entry retaining with no-pillars are used for longwall mining technology. The mining technology with no-pillars can recover coal pillar resources and reduce the amount and cost of roadway excavations. Automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is adopted for the condition of thick immediate roof and medium-thick coal seam mining, cutting off the immediate roof and the main roof on the gob by combined support. The fractured roof forms gangue blocks to fill the gob and loads the overlying strata. The gangue control system is placed on the roadside, which controls the caving gangue to form a gangue rib. In this paper, the viewpoints and key technologies (the roof-cutting technology, the reinforcement and support technology, the gangue rib control technology, and the auxiliary support technology) of automatic roadway technology for cutting roofs by combined support on the gob-side entry retaining with no-pillars are introduced. Furthermore, the formation and control process are explained. The numerical simulation is used to simulate and analyze the roof hanging and the roof cutting structures. In addition, a field engineering test is performed. The field test shows that automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is feasible. This process uses construction techniques and technologies to meet on-site production needs. The combined support has high resistance strength and is shrinkable. In engineering applications, the combined support has a low damage rate. The deformation of the automatic roadway with gob-side entry retaining is small, and the control effect is significant.

scholarly journals Movement Laws of Overlying Strata above a Fully Mechanized Coal Mining Face Backfilled with Gangue: A Case Study in Jiulishan Coal Mine in Henan Province, China

2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Zhengkai Yang ◽  
Zhiheng Cheng ◽  
Zhenhua Li ◽  
Chunyuan Li ◽  
Lei Wang ◽  
...  
Keyword(s):  
Coal Mining ◽  
Main Roof ◽  
Surrounding Rock ◽  
Surface Subsidence ◽  
Key Strata ◽  
Key Stratum ◽  
Mining Face ◽  
Failure Depth ◽  
Gangue Backfilling ◽  
Overlying Strata

The aim of this study is to obtain movement laws of overlying strata above a fully mechanized coal mining face backfilled with gangue and solve the problem of surface subsidence during coal mining. This study was carried out based on gangue backfilling mining of Jiulishan Coal Mine (Jiaozuo City, Henan Province, China) from the perspectives of deformation of backfilled gangue under compaction, surrounding rock of a stope, and activities of key strata. The method combining with rock mechanics, viscoelastic mechanics, control theory of rock mass under mining, and numerical simulation was used based on physical and mechanical characteristics of backfilled gangue. On this basis, the research analyzed the temporal-spatial relationships of activities of surrounding rock of the stope, compressive deformation of backfilling body, failure depth of the floor, deformation characteristics of the main roof with laws of surface subsidence. The movement characteristics of overlying strata above the fully mechanized coal mining face backfilled with gangue and the traditional fully mechanized mining face were compared. It is found that, under the same conditions of overlying strata, movement laws of overlying strata are mainly determined by the mining height of coal seams and the heights of a caving zone and a fracture zone are nearly linearly correlated with the mining height. Through analysis based on thin-plate theory and key stratum theory, the location of the main roof of the fully mechanized coal mining face backfilled with gangue in coal seams first bending and sinking due to load of overlying strata was ascertained. Then, it was determined that there are two key strata and the main roof belongs to the inferior key stratum. By using the established mechanical model for the main roof of the fully mechanized coal mining face backfilled with gangue and the calculation formula for the maximum deflection of the main roof, this research presented the conditions for breaking of the main roof. In addition, based on the theoretical analysis, it is concluded that the main roof of the fully mechanized coal mining face backfilled with gangue does not break, but bends. The numerical simulation results demonstrate that, with the continuous increase of strength of backfilled gangue, the stress concentration degree of surrounding rock reduces constantly, so does its decrease amplitude. Moreover, the compressive deformation of backfilling, failure depth of the floor, and bending and subsidence of the main roof continuously decrease and tend to be stable. The mechanical properties of backfilling materials determine effects of gangue backfilling in controlling surface subsidence. Gangue backfilling can effectively control movement of overlying strata and surface subsidence tends to be stable with the increase of elastic modulus of gangue.

Sign in / Sign up

Export Citation Format

Share Document