scholarly journals Control Performance Improvement of Hydro-Viscous Clutch Based on Fuzzy-PID Controller

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8282
Author(s):  
Xiangping Liao ◽  
Shuai Yang ◽  
Dong Hu ◽  
Guofang Gong ◽  
Xiongbin Peng

As a rotational speed controller, a hydro-viscous clutch (HVC) is usually used in the constant pressure water supply system to maintain the needed water pressure constant. However, when the hydro-viscous clutch is working, it often suffers from the problem of output rotational speed fluctuation since the spool of proportional relief valve can easily get stuck. Consequently, water pressure will fluctuate too. A special pump control system of HVC was proposed based on the Fuzzy-PID controller for the purpose of reducing the fluctuation rate. The MATLAB simulation was carried out according to the mathematical model and the results show that the Fuzzy-PID control strategy is superior to traditional PID control. The corresponding experiment was performed and the result indicate that through applying the Fuzzy-PID controller based pump control system, the rotational output speed fluctuation of HVC can be inhibited from ±60π to ±6π rad/min, and the water pressure fluctuation is dropped from ±0.1 to ±0.002 MPa.

2014 ◽  
Vol 945-949 ◽  
pp. 2568-2572
Author(s):  
Si Yuan Wang ◽  
Guang Sheng Ren ◽  
Pan Nie

The test rig for hydro-pneumatic converter used in straddle type monorail vehicles was researched, and its electro-pneumatic proportional control system was set up and simulated based on AMESim/Simulink. Compared fuzzy-PID (Proportion Integral Derivative) controller with PID controller through fuzzy logic tool box in Simulink, the results indicate that, this electro-pneumatic proportional control system can meet design requirements better, and fuzzy-PID controller has higher accuracy and stability than PID controller.


2013 ◽  
Vol 341-342 ◽  
pp. 892-895
Author(s):  
Jun Chao Zhang ◽  
Shao Hong Jing

The introduction of the AQC boiler has complex effects on the temperature of Tertiary air, traditional PID is difficult to achieve the effective control. Combined the method of the conventional PID with the fuzzy control theory, a fuzzy self-tuning PID controller is designed. Compared with traditional PID, results of simulation show that the fuzzy PID controller improves not only the adaptability and robustness of the system, but also the system's static and dynamic performance.


2020 ◽  
Vol 22 (7) ◽  
pp. 2163-2187
Author(s):  
Nguyen Dinh Phu ◽  
Nguyen Nhut Hung ◽  
Ali Ahmadian ◽  
Norazak Senu

2014 ◽  
Vol 568-570 ◽  
pp. 1026-1030
Author(s):  
Xue Jin Bai ◽  
Yong Ming Qiao

Fast-steering mirror system demands higher accuracy and fast responding speed to track targets, but the conventional PID controllers cannot meet the demands. Instead, the fuzzy PID control can greatly improve the capturing and tracking capacities to high-speed dynamic targets. So we apply the fuzzy-PID controller in the positioning loop of the stabilized system, not only improving the transient process of the control system and decreasing the overshoot, but also enhancing the accuracy of tracking stabilization and response. At the end, simulations were performed to test the effectiveness of this method through the MATLAB platform.


2009 ◽  
Vol 16-19 ◽  
pp. 150-154 ◽  
Author(s):  
Xue Ming Zhang ◽  
Gui Xiang Zhang ◽  
Feng Shao ◽  
Qing Jie Yang

The PID controllers can be seen in lots of fields, but some complex control system cannot be controlled to achieve a desired performance index. A design method of the fuzzy PID controller that is based on the fuzzy tuning rules and formed by integrating two above control ideas is proposed in this paper. The design procedure about fuzzy PID control can be divided two steps: the first step is to build the fuzzy tuning rules by analysis, and to obtain the parameters of PID controller by reasoning, and then the control action can be determined by the PID control law. The simulation results and the practical control effects show that the compound fuzzy PID controller has better performance than that of the conventional PID control system and meet the practical demands.


2013 ◽  
Vol 819 ◽  
pp. 238-243
Author(s):  
Yin Fa Zhu ◽  
Bing Bing Chen

The self-tuning fuzzy PID controller of the electro-hydraulic proportion position control system is designed and researched. Compared the self-tuning fuzzy PID control with the traditional PID control through experiments for the track effect on sinusoidal signals, the results show that the self-tuning fuzzy PID controller has higher accuracy and better stability. It is a more excellent performance controller.


2012 ◽  
Vol 466-467 ◽  
pp. 47-51 ◽  
Author(s):  
Jing Liu

The process of PVC polymerization is nonlinear and time-delayed. It is very difficult to establish an exact mathematical model. Based on the analysis of the conventional PID controller’s limitation, the fuzzy PID control system of PVC polymerization is introduced. A new kind of fuzzy PID controller is designed and the three parameters of PID can be self-tuned on-line. The simulation result proves that fuzzy PID controller is better than common PID controller.


2015 ◽  
Vol 727-728 ◽  
pp. 633-636 ◽  
Author(s):  
Qiang Gu ◽  
Feng Long Zheng ◽  
Bin Bin Liu ◽  
Wen Yan Yang

Since the object model is time-varying and time-delay in the electric boiler temperature control system, Smith Fuzzy PID controller is applied in it. Simulation results in the paper show that the overshoot is reduced by 31.3% compared with the system under Smith PID control and the adjusting time reached a 30% reduction compared with those under Fuzzy PID control with T=380 and τ=110. In order to eliminate the oscillation problem in system when model parameters change, a new Smith Fuzzy PID controller with two degrees of freedom is applied, whose control performance is much better than that of Smith Fuzzy PID.


Author(s):  
Bambang Sumantri ◽  
Eko Henfri Binugroho ◽  
Ilham Mandala Putra ◽  
Rika Rokhana

The two-wheeled electric skateboard (TWS) is designed for a personal vehicle. A Fuzzy-PID control strategy is designed and implemented for controlling its motion. Basically, motions control of the TWS is performed by balancing the pitch position of the TWS. Performance of the designed controller is demonstrated experimentally. The Fuzzy algorithm updates the PID gains and therefore it can handle the changing of the TWS load. Contribution of Fuzzy-PID in reducing the electric energy consumption, which is an important issue in electrical system, is also evaluated. The Fuzzy-PID successes to reduce the electric energy consumption of the TWS compared to the conventional PID.


2013 ◽  
Vol 325-326 ◽  
pp. 1193-1196
Author(s):  
Guo Sheng Xu

In view of the fact that the performance of any conventional PID control can t meet the requirement an electric boiler temperature control system, this paper puts forward a kind of improved algorithm for tuning the PID parameters. an adaptive fuzzy controller with adjusting factor is proposed in this paper. Experimental results illustrate that the adaptive fuzzy PID controller achieved the system performance index. The method of adaptive fuzzy PID control is a ideal method.


Sign in / Sign up

Export Citation Format

Share Document