scholarly journals Hydrolysis and Photolysis Kinetics, and Identification of Degradation Products of the Novel Bactericide 2-(4-Fluorobenzyl)-5-(Methylsulfonyl)-1,3,4-Oxadiazole in Water

2018 ◽  
Vol 15 (12) ◽  
pp. 2741 ◽  
Author(s):  
Xingang Meng ◽  
Lingzhu Chen ◽  
Yuping Zhang ◽  
Deyu Hu ◽  
Baoan Song
Keyword(s):  
Degradation Product ◽  
High Performance ◽  
Degradation Products ◽  
Degradation Mechanism ◽  
The Novel ◽  
Initial Concentration ◽  
First Order ◽  
First Order Kinetics ◽  
Kinetics Of ◽  
High Resolution Mass Spectrometer

Hydrolysis and photolysis kinetics of Fubianezuofeng (FBEZF) in water were investigated in detail. The hydrolysis half-lives of FBEZF depending on pH, initial concentration, and temperature were (14.44 d at pH = 5; 1.60 d at pH = 7), (36.48 h at 1.0 mg L−1; 38.51 h at 5.0 mg L−1; and 31.51 h at 10.0 mg L−1), and (77.02 h at 15 °C; 38.51 h at 25 °C; 19.80 h at 35 °C; and 3.00 h at 45 °C), respectively. The photolysis half-life of FBEZF in different initial concentrations were 8.77 h at 1.0 mg L−1, 8.35 h at 5.0 mg L−1, and 8.66 h at 10.0 mg L−1, respectively. Results indicated that the degradation of FBEZF followed first-order kinetics, as the initial concentration of FBEZF only had a slight effect on the UV irradiation effects, and the increase in pH and temperature can substantially accelerate the degradation. The hydrolysis Ea of FBEZF was 49.90 kJ mol−1, which indicates that FBEZF belongs to medium hydrolysis. In addition, the degradation products were identified using ultra-high-performance liquid chromatography coupled with an Orbitrap high-resolution mass spectrometer. One degradation product was extracted and further analyzed by 1H-NMR, 13C-NMR, 19F-NMR, and MS. The degradation product was identified as 2-(4-fluorobenazyl)-5-methoxy-1,3,4-oxadiazole, therefore a degradation mechanism of FBEZF in water was proposed. The research on FBEZF can be helpful for its safety assessment and increase the understanding of FBEZF in water environments.

The In Vitro Degradation Kinetics of Polyurethane Prodrug Materials

2011 ◽  
Vol 399-401 ◽  
pp. 1067-1070
Author(s):  
Chun Yan Li ◽  
Cong Cong Hu ◽  
Zhi Guo Wen ◽  
Sheng Xiong Dong
Keyword(s):  
Drug Release ◽  
High Performance ◽  
Degradation Kinetics ◽  
Hplc Method ◽  
In Vitro Degradation ◽  
Erosion Mechanism ◽  
First Order ◽  
First Order Kinetics ◽  
Kinetics Of

The method of high performance liquid chromatography (HPLC) is established to determine the content of antibacterial agent — ciprofloxacin (CF) in the degradation solution of ciprofloxacin-polyurethane (CFPU) and investigate the in vitro degradation kinetics by plotting and fitting the cumulative release curves to inspect the effects of different medium and different concentrations on drug release. The results showed that the HPLC method is accurate, reliable and simple. The drug-release of CFPU was bioresponsive and could be accorded with first order kinetics. It was observed that CF was released from CFPU by a combination of diffusion and erosion mechanism, mainly in the manner of diffusion in the absence of infection while erosion mechanism in the presence of infection.

scholarly journals ESTUDO DE ESTABILIDADE DO FOSFATO DISSÓDICO DE PREDNISOLONA EM CONDIÇÕES DE ESTRESSE OXIDATIVO E TÉRMICO, EM FORMULAÇÃO ORAL

2018 ◽  
Vol 35 (4) ◽  
pp. 09
Author(s):  
Cleber Antonio Lindino ◽  
Marcia Lina Mitsui ◽  
Rodolfo Ortiguara ◽  
Daiane Felin ◽  
Mauricio Ferreira Da Rosa ◽  
...  
Keyword(s):  
High Performance ◽  
Dosage Form ◽  
Degradation Products ◽  
Degradation Process ◽  
Oral Solution ◽  
Form Solution ◽  
Oral Dosage ◽  
First Order ◽  
First Order Kinetics

This work was to investigate the process of degradation of the drug Prednisolone Sodium Phosphate (FSP) in oral solution dosage form through the degradation experiments, evaluating the parameters in accordance with Resolution 899/2003 ANVISA and the degradation process of the drug. The method by high performance liquid chromatography (HPLC) developed for the determination of the drug was validated to demonstrate its applicability as an indicator of stability, ensuring reliability. After the method be validated to study the degradation of the drug, it was shown that drastic conditions of oxidative stress (H O 30%) and 2 2 temperature 60°C, the degradation of the drug is dependent on its concentration (first order kinetics). The results were  satisfactory, showing that this method is suitable to investigate the formation of degradation products in oral dosage form solution

scholarly journals Photodegradation of diclofenac in aqueous solution by simulated sunlight irradiation: kinetics, thermodynamics and pathways

2017 ◽  
Vol 75 (9) ◽  
pp. 2163-2170 ◽  
Author(s):  
N. Zhang ◽  
J. M. Li ◽  
G. G. Liu ◽  
X. L. Chen ◽  
K. Jiang
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Photobacterium Phosphoreum ◽  
Degradation Pathways ◽  
Simulated Sunlight ◽  
Liquid Chromatography Mass Spectrometry ◽  
Sunlight Irradiation ◽  
First Order ◽  
First Order Kinetics ◽  
Pseudo First Order

Diclofenac (DCF) is one of the most frequently detected pharmaceuticals in various water samples. This paper studied the effects of aquatic environmental factors (pH, temperature and dissolved organic matter) on photodegradation of DCF under simulated sunlight. The results demonstrate that degradation pathways proceed via pseudo first-order kinetics in all cases and the photodegradation of DCF by simulated sunlight. Thermodynamic study indicated that the photodegradation course is spontaneous, exothermic and irreversible. The rate constant gradually increased when the pH increased from 3 to 5, then decreased when the pH increased from 5 to 8, and finally increased when the pH further increased from 8 to 12. Humic acid inhibited the photodegradation of DCF. Three kinds of main degradation products were observed by high performance liquid chromatography/mass spectrometry and the degradation pathways were suggested. A toxicity test using Photobacterium phosphoreum T3 Sp indicated the generation of some more toxic products than DCF.

scholarly journals A Kinetic Study on Enhanced Cementation of Gold Ions by Galvanic Interactions between Aluminum (Al) as an Electron Donor and Activated Carbon (AC) as an Electron Mediator in Ammonium Thiosulfate System

Minerals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 91
Author(s):  
Sanghee Jeon ◽  
Sharrydon Bright ◽  
Ilhwan Park ◽  
Akuru Kuze ◽  
Mayumi Ito ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Electron Donor ◽  
Promising Technique ◽  
Electron Mediator ◽  
Initial Concentration ◽  
First Order ◽  
Ammonium Thiosulfate ◽  
First Order Kinetics ◽  
Galvanic Interaction ◽  
Kinetics Of

The enhanced cementation technique by galvanic interaction of aluminum (Al; electron donor) and activated carbon (AC; electron mediator) to recover gold (Au) ions from the ammonium thiosulfate solution is a promising technique to eliminate the challenges of poor recovery in the system. This study presents the kinetics of Au ion cementation in an ammonium thiosulfate lixiviant as functions of initial Au concentration, size/amount of Al and AC, temperature, and shaking speed. The recovery results basically followed first order kinetics and showed that the cementation rate increased with a higher initial concentration of Au, smaller electron donor size, greater both electron donor and mediator quantity, decrease in temperature, and higher shaking speed in the system, while size of electron mediator did not significantly affect Au recovery.

The effect of photosensitizer on diclofenac photodegradation under simulated sunlight

2013 ◽  
Vol 67 (2) ◽  
pp. 418-423 ◽  
Author(s):  
N. Zhang ◽  
G. G. Liu ◽  
H. J. Liu ◽  
Y. L. Wang ◽  
T. Li
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Degradation Pathways ◽  
Simulated Sunlight ◽  
Liquid Chromatography Mass Spectrometry ◽  
First Order ◽  
Chemical Structures ◽  
First Order Kinetics ◽  
Photodegradation Rate ◽  
Pseudo First Order

This paper studies the effect of photosensitizer (acetone, H2O2, surfactant and pigment) on photodegradation of diclofenac (DCF) under simulated sunlight. The results demonstrate that degradation pathways proceed via pseudo first-order kinetics in all cases. The photodegradation rate was found to increase with increasing acetone and H2O2. Surfactant and pigment inhibited the photodegradation of DCF. Finally, four kinds of main degradation products were observed by high performance liquid chromatography/mass spectrometry and their chemical structures were suggested.

Photo-catalytic degradation of gaseous pollutants in paper mills of southern China

TAPPI Journal ◽  
2018 ◽  
Vol 17 (03) ◽  
pp. 167-178 ◽  
Author(s):  
Xin Tong ◽  
Jiao Li ◽  
Jun Ma ◽  
Xiaoquan Chen ◽  
Wenhao Shen
Keyword(s):  
Degradation Rate ◽  
Southern China ◽  
Catalytic Degradation ◽  
Pulp And Paper ◽  
Gaseous Pollutants ◽  
Pulp And Paper Mills ◽  
Paper Mills ◽  
Initial Concentration ◽  
First Order ◽  
First Order Kinetics

Studies were undertaken to evaluate gaseous pollutants in workplace air within pulp and paper mills and to consider the effectiveness of photo-catalytic treatment of this air. Ambient air at 30 sampling sites in five pulp and paper mills of southern China were sampled and analyzed. The results revealed that formaldehyde and various benzene-based molecules were the main gaseous pollutants at these five mills. A photo-catalytic reactor system with titanium dioxide (TiO2) was developed and evaluated for degradation of formaldehyde, benzene and their mixtures. The experimental results demonstrated that both formaldehyde and benzene in their pure forms could be completely photo-catalytic degraded, though the degradation of benzene was much more difficult than that for formaldehyde. Study of the photo-catalytic degradation kinetics revealed that the degradation rate of formaldehyde increased with initial concentration fitting a first-order kinetics reaction. In contrast, the degradation rate of benzene had no relationship with initial concentration and degradation did not conform to first-order kinetics. The photo-catalytic degradation of formaldehyde-benzene mixtures indicated that formaldehyde behaved differently than when treated in its pure form. The degradation time was two times longer and the kinetics did not reflect a first-order reaction. The degradation of benzene was similar in both pure form and when mixed with formaldehyde.

Kinetic of oxidation of methyl orange by vanadium(V) under conditions VO2+ and decavanadates coexist: Catalysis by Triton X-100 micellar medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Methyl Orange ◽  
Solution Ph ◽  
Vanadium Concentration ◽  
Limiting Behavior ◽  
First Order ◽  
First Order Kinetics ◽  
Ph Range ◽  
Kinetic Pattern ◽  
Triton X ◽  
Kinetics Of

The kinetics of oxidation of methyl orange by vanadium(V) {V(V)} has been investigated in the pH range 2.3-3.79. In this pH range V(V) exists both in the form of decavanadates and VO2+. The kinetic results are distinctly different from the results obtained for the same reaction in highly acidic solution (pH < 1) where V(V) exists only in the form of VO2+. The reaction obeys first order kinetics with respect to methyl orange but the rate has very little dependence on total vanadium concentration. The reaction is accelerated by H+ ion but the dependence of rate on [H+] is less than that corresponding to first order dependence. The equilibrium between decavanadates and VO2+ explains the different kinetic pattern observed in this pH range. The reaction is markedly accelerated by Triton X-100 micelles. The rate-[surfactant] profile shows a limiting behavior indicative of a unimolecular pathway in the micellar pseudophase.

scholarly journals Comparative Study of Chemical Stability of Two H1Antihistaminic Drugs, Terfenadine and ItsIn VivoMetabolite Fexofenadine, Using LC-UV Methods

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Anna Gumieniczek ◽  
Anna Berecka-Rycerz ◽  
Rafał Pietraś ◽  
Izabela Kozak ◽  
Karolina Lejwoda ◽  
...  
Keyword(s):  
Comparative Study ◽  
Chemical Stability ◽  
First Order ◽  
First Order Kinetics ◽  
Kinetics Of Degradation ◽  
Effects Of Temperature ◽  
High Doses ◽  
Antihistaminic Drugs ◽  
Kinetics Of

A comparative study of chemical stability of terfenadine (TER) and itsin vivometabolite fexofenadine (FEX) was performed. Both TER and FEX were subjected to high temperature at different pH and UV/VIS light at different pH and then quantitatively analyzed using new validated LC-UV methods. These methods were used to monitor the degradation processes and to determine the kinetics of degradation for both the compounds. As far as the effects of temperature and pH were concerned, FEX occurred more sensitive to degradation than TER. As far as the effects of UV/VIS light and pH were concerned, the both drugs were similarly sensitive to high doses of light. Using all stress conditions, the processes of degradation of TER and FEX followed the first-order kinetics. The results obtained for these two antihistaminic drugs could be helpful in developing their new derivatives with higher activity and stability at the same time.

New insights on the UV/TiO2 photocatalytic treatment of thiomersal and its 2-sulfobenzoic acid product

2021 ◽  
Vol 02 ◽  
Author(s):  
Emmanuel M. de la Fournière ◽  
Jorge M. Meichtry ◽  
Graciela S. Custo ◽  
Eduardo A. Gautier ◽  
Marta I. Litter
Keyword(s):  
Degradation Products ◽  
Acidic Ph ◽  
Cosmetic Products ◽  
Acid Product ◽  
First Order ◽  
First Order Kinetics ◽  
Photocatalytic Destruction ◽  
Pseudo First Order ◽  
Mineralization Degree ◽  
Suitable Technique

Background: Thiomersal (TM), a complex between 2-mercaptobenzoic acid (2-MBA) and ethylmercury (C2H5Hg+), is an antimicrobial preservative used in immunological, ophthalmic, cosmetic products, and vaccines. Objective: TM has been treated by UV/TiO2 photocatalysis in the presence or absence of oxygen at acidic pH. C2H5Hg+, 2-MBA, and 2-sulfobenzoic acid (2-SBA) were found as products. A 2-SBA photocatalytic treatment was undertaken to study sulfur evolution. Methods: Photocatalytic runs were performed using a UVA lamp (λmax = 352 nm), open to the air or under N2. A suspension of the corresponding TM or 2-SBA salt and TiO2 was prepared, and pH was adjusted. Suspensions were stirred in the dark for 30 min and then irradiated. TM, 2-MBA, 2-SBA, and C2H5Hg+ were quantified by HPLC, sulfur by TXRF, and the deposits on the photocatalyst were analyzed by chemical reactions. The mineralization degree was followed by TOC. Sulfate was determined using BaCl2 at 580 nm. Results: Photocatalytic destruction of TM and total C2H5Hg+ was complete under N2 and air, but TM degradation was much faster in air. The evolution of TM and the products followed a pseudo-first-order kinetics. Conclusion: TiO2-photocatalytic degradation is a suitable technique for the treatment of TM and its degradation products. In contrast to other organomercurial compounds, TM degradation is faster in the presence of O2, indicating that the oxidative mechanism is the preferred pathway. A significant TM mineralization (> 60%, NPOC and total S) was obtained. TM was more easily degraded than 2-SBA. Sulfate was the final product.

Effects of initial concentration and irradiation dose to degradation of di butyl phthalate from phosphoric acid (30 % P2O5)

2018 ◽  
Vol 106 (11) ◽  
pp. 909-916
Author(s):  
Louisa Bounemia ◽  
Abdelhamid Mellah
Keyword(s):  
Organic Matter ◽  
Phosphoric Acid ◽  
Optimal Recovery ◽  
Γ Irradiation ◽  
Γ Radiation ◽  
Initial Concentration ◽  
First Order ◽  
First Order Kinetics ◽  
Butyl Phthalate

Abstract The pretreatment of the phosphoric acid is a stage of utmost importance leading to an optimal recovery of the uranium present in this acid. To this end, the degradation of the organic matter which obstructs considerably this recovery was tested by γ irradiation. This study lies within the scope of the radiation/matter interaction; concerning the use of the γ irradiator as proceed of phosphoric acid purification by the degradation of di butyl phthalate (DBP). Studies of the interaction of γ radiation with phosphoric acid solutions polluted by an organic matter concern the study of the influence of some parameters such as: dose rate (0.5–35 kGy), initial concentration (50–500 mg/L) of the pollutant, pH and % in P2O5 on the degradation of organic matter by γ irradiation. The reactions followed pseudo first order kinetics for different initial concentrations. The results made it possible to say that the degradation of di butyl phthalate by γ irradiation is dependent on the amount of the concentration of DBP and pH. The G-values decreased with absorbed doses, and increased with higher initial concentrations.Purification of phosphoric acid by γ radiation does not degrade the quality of this acid.

Sign in / Sign up

Export Citation Format

Share Document