scholarly journals Alkali-Activated Cements for TES Materials in Buildings’ Envelops Formulated With Glass Cullet Recycling Waste and Microencapsulated Phase Change Materials

Materials ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2144 ◽  
Author(s):  
Jessica Giro-Paloma ◽  
Camila Barreneche ◽  
Alex Maldonado-Alameda ◽  
Miquel Royo ◽  
Joan Formosa ◽  
...  

Within the thermal energy storage field, one of the main challenges of this study is the development of new enhanced heat storage materials to be used in the building sector. The purpose of this study is the development of alkali-activated cements (AACs) with mechanical properties to store high amounts of heat. These AACs incorporate wastes from industrial glass process as well as microencapsulated phase change materials (mPCMs) to improve the thermal inertia of building walls, and accordingly respective energy savings. The research presented below consists of the exhaustive characterization of different AACs formulated from some waste generated during the proper management of municipal waste used as precursor. In this case study, AACs were formulated with the waste generated during the recycling of glass cullet, namely ceramic, stone, and porcelain (CSP), which is embedding a mPCM. The addition of mPCM was used as thermal energy storage (TES) material. The mechanical properties were also evaluated in order to test the feasibility of the use of the new formulated materials as a passive TES system. The results showed that the AAC obtained from CSP (precursors) mixed with mPCMs to obtain a thermal regulator material to be implemented in building walls was reached successfully. The material developed was resistant enough to perform as insulating panels. The formulated materials had high storage capacity depending on the PCM content. The durability of the mPCM shell was studied in contact with alkaline medium (NaOH 4 M) and no degradation was confirmed. Moreover, the higher the content of mPCM, the lower the mechanical properties expected, due to the porosity increments with mPCM incorporation in the formulations.

RSC Advances ◽  
2020 ◽  
Vol 10 (14) ◽  
pp. 8097-8103 ◽  
Author(s):  
Wenbin Wang ◽  
Huimin Cao ◽  
Jingyi Liu ◽  
Shifang Jia ◽  
Lin Ma ◽  
...  

Phase change energy storage wood (PCESW) was prepared by using microencapsulated phase change materials (MicroPCM) as thermal energy storage (TES) materials and wood as the matrix.


2019 ◽  
Vol 3 (5) ◽  
pp. 1091-1149 ◽  
Author(s):  
Huan Liu ◽  
Xiaodong Wang ◽  
Dezhen Wu

This review focuses on methodologies, technologies and innovative design of microencapsulated PCMs with a variety of shells for versatile applications.


Sign in / Sign up

Export Citation Format

Share Document