scholarly journals Structure and Oligonucleotide Binding Efficiency of Differently Prepared Click Chemistry-Type DNA Microarray Slides Based on 3-Azidopropyltrimethoxysilane

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2855
Author(s):  
Emilia Frydrych-Tomczak ◽  
Tomasz Ratajczak ◽  
Łukasz Kościński ◽  
Agnieszka Ranecka ◽  
Natalia Michalak ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Dna Microarrays ◽  
Structural Characteristics ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Glass Slides ◽  
Surface Modified ◽  
Oligonucleotide Binding

The structural characterization of glass slides surface-modified with 3-azidopropyltrimethoxysilane and used for anchoring nucleic acids, resulting in the so-called DNA microarrays, is presented. Depending on the silanization conditions, the slides were found to show different oligonucleotide binding efficiency, thus, an attempt was made to correlate this efficiency with the structural characteristics of the silane layers. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry (XRR) measurements provided information on the surface topography, chemical composition and thickness of the silane films, respectively. The surface for which the best oligonucleotides binding efficiency is observed, has been found to consist of a densely-packed silane layer, decorated with a high-number of additional clusters that are believed to host exposed azide groups.

Characterization of Multiple Functional Solid Line of Graphite Ink Surface Printed by Micro-Flexographic

2015 ◽  
Vol 752-753 ◽  
pp. 1379-1383
Author(s):  
M.I. Maksud ◽  
Mohd Sallehuddin Yusof ◽  
Zaidi Embong
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Printing Plate ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Flexographic Printing ◽  
Scanning Electron

The purpose of this paper is to study a ink surface morphology, quantify the chemical composition involved in processing of graphite ink printed by flexographic printing. The methodology is to use surface sensitive technique, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) and Field Emission Scanning Electron Microscopy (FESEM). As a finding we successfully achieved 25 micron lines array using PDMS printing plate. The Originality and value of this work is surface sensitive techniques like XPS, AFM and FESEM were exclusively used in order to characterize graphite inks printed by flexographic method, using PDMS printing plate.

Interaction of salicylic acid with zirconium diphosphate and its reactivity toward uranium (VI)

2018 ◽  
Vol 106 (4) ◽  
pp. 291-300
Author(s):  
Nidia García-González ◽  
Eduardo Ordoñez-Regil ◽  
María Guadalupe Almazán-Torres ◽  
Eric Simoni
Keyword(s):  
Salicylic Acid ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Analytical Techniques ◽  
Batch Method ◽  
Sorption Data ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Surface Modified

AbstractThe interaction of salicylic acid with zirconium diphosphate surface and its reactivity toward uranium (VI) was investigated. The interaction of salicylic acid with zirconium diphosphate was firstly studied using several analytical techniques including atomic force microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy. The sorption of uranium (VI) onto surface-modified zirconium diphosphate was evaluated by the classical batch method at room temperature. This study showed that the uranium (VI) sorption onto zirconium diphosphate is influenced by the presence of salicylic acid. A fluorescence spectroscopy study revealed the presence of a uranyl specie onto the modified solid surface. The spectroscopy results were then used to restrain the modeling of experimental sorption data, which are interpreted in terms of a constant capacitance model using the FITEQL code. The results indicated that interaction between the uranium (VI) and the surface of zirconium diphosphate modified with salicylic acid leads to the formation of a ternary surface complex.

scholarly journals Synthesis and Characterization of Strontium Titanate Nanoparticles as Potential High Temperature Oxygen Sensor Material

2006 ◽  
Vol 2006 ◽  
pp. 1-6 ◽  
Author(s):  
Florian Voigts ◽  
Tanja Damjanovic ◽  
Günter Borchardt ◽  
Christos Argirusis ◽  
Wolfgang Maus-Friedrichs
Keyword(s):  
High Temperature ◽  
Strontium Titanate ◽  
Photoelectron Spectroscopy ◽  
Oxygen Sensor ◽  
Ambient Conditions ◽  
X Ray ◽  
Sensor Material ◽  
Force Microscopy ◽  
Atomic Force

We present a simple and highly reproductive method for the preparation of thin films consisting of strontium titanate nanoparticles. The films are produced by spin coating of a sol on silicon targets and subsequent annealing under ambient conditions. Analysis by atomic force microscopy shows particles with typical sizes between 10 nm and 50 nm. X-ray photoelectron spectroscopy displays a stoichiometry of the films as anticipated from preliminary experiments with strontium titanate single crystals. Metastable-induced electron spectroscopy and ultraviolet photoelectron spectroscopy are used as tools to give evidence to the similar electronic properties of nanoparticle film and single crystal. These results support the prospect for an application of the nanoparticle films as high temperature oxygen sensor with superior properties.

CHARACTERIZATION OF ALUMINUM SURFACES AFTER DIFFERENT PRETREATMENTS AND EXPOSURE TO SILANE COUPLING AGENTS

2001 ◽  
Vol 08 (01n02) ◽  
pp. 43-50 ◽  
Author(s):  
M. KONO ◽  
X. SUN ◽  
R. LI ◽  
K. C. WONG ◽  
K. A. R. MITCHELL ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Coupling Agents ◽  
Chemical Compositions ◽  
Silane Coupling Agents ◽  
Oh Groups ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Aluminum Surfaces

X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscopy (SEM) have been used to characterize surfaces of aluminum which have been pretreated by mechanical polishing, acid etching and alkaline etching, as well as given subsequent exposures to air and water. These surfaces can differ markedly with regard to their chemical compositions and topographical structures. Characterizations of these surfaces after exposures to three organosilanes, γ-GPS, BTSE and γ-APS, indicate that the amount of silane adsorbed in each case shows a tendency to increase both with the number of OH groups detected at the oxidized aluminum and with the surface roughness. The XPS data are consistent with the adhesion of γ-APS occurring through H bonding, especially via NH3+ groups.

Differential height characteristics of plasmid and G-wire DNA as determined by AFM

1994 ◽  
Vol 52 ◽  
pp. 1052-1053
Author(s):  
T. C. Marsh ◽  
J. Vesenka ◽  
E. Henderson
Keyword(s):  
Plasmid Dna ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Helical Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dimension One

Atomic-Force Microscopy (AFM) has become an effective tool in the three dimensional characterization of biological systems and is capable of Angstrom sensitivity in the vertical dimension. One unresolved dilemma is that the observed height (diameter) of B-DNA being about 10Å, is less than half its x-ray diffraction value. In this paper we attempt to determine the source of this discrepancy by comparing plasmid DNA co-deposited with a novel form of DNA called “G-wires” (Figure 1). G-wires are formed by G-rich sequences. They are composed of G-4 DNA, a quadruple helical structure. X-ray data of G-4 DNA gives a diameter of 27Å, comparable to that expected for B-DNA (20 to 25Å). In the AFM these structures have a significantly greater height (av. = 22 Å) compared to double stranded (av. = 7 Å) or supercoiled B-DNA (av. = 14 Å) (Figure 2). Thus, the apparent height of nucleic acids in the AFM is dependent upon their innate structural characteristics.

Surface Characterization of Electrochemically Fabricated CuO Doped ZnO Thin Film

2005 ◽  
Vol 277-279 ◽  
pp. 972-976
Author(s):  
Jang Hee Yoon ◽  
Yoon Bo Shim ◽  
Chae Ryong Cho ◽  
Mi Sook Won
Keyword(s):  
Photoelectron Spectroscopy ◽  
Surface Characterization ◽  
Reference Electrode ◽  
Cathodic Current ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Zn Concentration ◽  
Solution Doping

In this study, ZnO and CuO doped zinc oxide thin films were cathodically deposited in aqueous zinc chloride solutions in the presence of oxygen on a Pt/Ti/SiO2/Si substrate through an electrochemical reaction. A mercurous sulfate electrode was used as a reference electrode and the counter electrode was a Pt spiral wire. Deposition was carried out in solutions containing Zn2+ ions introduced as ZnCl2 salt at concentrations ranging from 5.0 x 10-4 to 5.0 x 10-2 M. The bath temperatures were controlled from 65°C to 80°C. The oxygen gas was introduced from argon/oxygen mixtures allowing its partial pressure to be fixed along with its concentration in the solution. Doping of CuO was carried out in cupric nitrate or a cupric chloride/0.1M KCl solution. The influence of the Cu/Zn concentration, deposition temperature of a solution, applied cathodic potential and deposition time were optimized. After the potential was applied, the cathodic current reached a steady state within 5 min. The composition, and the characterization of the surface of the films were investigated through X-ray diffractometry, X-ray photoelectron spectroscopy, atomic force microscopy and scanning electron microscopy.

Atomic force microscopy and X-ray photoelectron spectroscopy characterization of low-energy ion sputtered mica

2007 ◽  
Vol 601 (13) ◽  
pp. 2735-2739 ◽  
Author(s):  
Renato Buzio ◽  
Andrea Toma ◽  
Andrea Chincarini ◽  
Francesco Buatier de Mongeot ◽  
Corrado Boragno ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Photoelectron Spectroscopy ◽  
Low Energy ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

Structural and Morphological Differences of Thin Films Obtained by Plasma Polymerization of Pyrrole (Ppy) and Thiophene (Pth)

2002 ◽  
Vol 725 ◽  
Author(s):  
Salvador Borrós ◽  
M.Paz Diago ◽  
Joan Esteve ◽  
Núria Agulló
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Photoelectron Spectroscopy ◽  
Plasma Polymerization ◽  
Morphological Characterization ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Morphological Differences

AbstractIn this work, thin films (thickness ∼ 0.5 μm) were obtained by plasma polymerization of pyrrole (Ppy) and thiophene (Pth) at 25-30 W and 0.1-0.2 mbar of pressure. Further doping with iodine was carried out to some of the Ppy and Pth films (Ppy/I2, Pth/I2) in order to enhance their electrical conductivity properties.Structural and morphological characterization of both Ppy and Pth as well as of Ppy/I2 and Pth/I2 was performed using Infrared Spectroscopy (IR), X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscopy (AFM).In the light of the information given by IR, XPS and AFM techniques, exhaustive and accurate description of both undoped and I2/doped Ppy and Pth films obtained by Plasma Polymerization is attained.

Sign in / Sign up

Export Citation Format

Share Document