A New Compromise Design Plan for Accelerated Failure Time Models with Temperature as an Acceleration Factor
An accelerated life test of a product or material consists of the observation of its failure time when it is subjected to conditions that stress the usual ones. The purpose is to obtain the parameters of the distribution of the time-to-failure for usual conditions through the observed failure times. A widely used method to provoke an early failure in a mechanism is to modify the temperature at which it is used. In this paper, the statistically optimal plan for Accelerated Failure Time (AFT) models, when the accelerated failure process is described making use of Arrhenius or Eyring equations, was calculated. The result was a design that had only two stress levels, as is common in other AFT models and that is not always practical. A new compromise plan was presented as an alternative to the widely used “4:2:1 plan”. The three-point mixture design proposed specified a support point in the interval that was optimal for the estimation of the parameters in AFT models, rather than simply the middle point. It was studied in comparison to different commonly used designs, and it proved to have a higher D-efficiency than the others.