scholarly journals Multiple Amine-Contained POSS-Functionalized Organosilica Membranes for Gas Separation

Membranes ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 194
Author(s):  
Xiuxiu Ren ◽  
Masakoto Kanezashi ◽  
Meng Guo ◽  
Rong Xu ◽  
Jing Zhong ◽  
...  
Keyword(s):  
Gas Separation ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Hybrid Membranes ◽  
Mixed Matrix ◽  
Translation Model ◽  
Good Thermal Stability ◽  
Oligomeric Silsesquioxane

A new polyhedral oligomeric silsesquioxane (POSS) designed with eight –(CH2)3–NH–(CH2)2–NH2 groups (PNEN) at its apexes was used as nanocomposite uploading into 1,2-bis(triethoxysilyl)ethane (BTESE)-derived organosilica to prepare mixed matrix membranes (MMMs) for gas separation. The mixtures of BTESE-PNEN were uniform with particle size of around 31 nm, which is larger than that of pure BTESE sols. The characterization of thermogravimetric (TG) and gas permeance indicates good thermal stability. A similar amine-contained material of 3-aminopropyltriethoxysilane (APTES) was doped into BTESE to prepare hybrid membranes through a copolymerized strategy as comparison. The pore size of the BTESE-PNEN membrane evaluated through a modified gas-translation model was larger than that of the BTESE-APTES hybrid membrane at the same concentration of additions, which resulted in different separation performance. The low values of Ep(CO2)-Ep(N2) and Ep(N2) for the BTESE-PNEN membrane at a low concentration of PNEN were close to those of copolymerized BTESE-APTES-related hybrid membranes, which illustrates a potential CO2 separation performance by using a mixed matrix membrane strategy with multiple amine POSS as particles.

Carbon Nanotubes Based Mixed Matrix Membrane for Gas Separation

2011 ◽  
Vol 364 ◽  
pp. 272-277 ◽  
Author(s):  
S.M. Sanip ◽  
A.F. Ismail ◽  
P.S. Goh ◽  
M.N.A. Norrdin ◽  
T. Soga ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Gas Separation ◽  
Polymer Matrix ◽  
Current Trend ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Mixed Matrix ◽  
Polyimide Membrane

Mixed matrix membranes (MMM) combine useful molecular sieving properties of inorganic fillers with the desirable mechanical and processing properties of polymers. The current trend in polymeric membranes is the incorporation of filler-like nanoparticles to improve the separation performance. Most MMM have shown higher gas permeabilities and improved gas selectivities compared to the corresponding pure polymer membranes. Carbon nanotubes based mixed matrix membrane was prepared by the solution casting method in which the functionalized multiwalled carbon nanotubes (f-MWNTs) were embedded into the polyimide membrane and the resulting membranes were characterized. The effect of nominal MWNTs content between 0.5 and 1.0 wt% on the gas separation properties were looked into. The as-prepared membranes were characterized for their morphology using field emission scanning electron microscopy (FESEM) and Transmission Electron Microscopy (TEM). The morphologies of the MMM also indicated that at 0.7 % loading of f-MWNTs, the structures of the MMM showed uniform finger-like structures which have facilitated the fast gas transport through the polymer matrix. It may also be concluded that addition of open ended and shortened MWNTs to the polymer matrix can improve its permeability by increasing diffusivity through the MWNTs smooth cavity.

scholarly journals A Novel Composite Material UiO-66@HNT/Pebax Mixed Matrix Membranes for Enhanced CO2/N2 Separation

Membranes ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 693
Author(s):  
Fei Guo ◽  
Bingzhang Li ◽  
Rui Ding ◽  
Dongsheng Li ◽  
Xiaobin Jiang ◽  
...  
Keyword(s):  
Composite Material ◽  
Gas Separation ◽  
Halloysite Nanotubes ◽  
Gas Permeation ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Mixed Matrix ◽  
Transport Pathways ◽  
Gas Separation Performance

Mixing a polymer matrix and nanofiller to prepare a mixed matrix membrane (MMM) is an effective method for enhancing gas separation performance. In this work, a unique UiO-66-decorated halloysite nanotubes composite material (UiO-66@HNT) was successfully synthesized via a solvothermal method and dispersed into the Pebax-1657 matrix to prepare MMMs for CO2/N2 separation. A remarkable characteristic of this MMM was that the HNT lumen provided the highway for CO2 diffusion due to the unique affinity of UiO-66 for CO2. Simultaneously, the close connection of the UiO-66 layer on the external surface of HNTs created relatively continuous pathways for gas permeation. A suite of microscopy, diffraction, and thermal techniques was used to characterize the morphology and structure of UiO-66@HNT and the membranes. As expected, the embedding UiO-66@HNT composite materials significantly improved the separation performances of the membranes. Impressively, the as-obtained membrane acquired a high CO2 permeability of 119.08 Barrer and CO2/N2 selectivity of 76.26. Additionally, the presence of UiO-66@HNT conferred good long-term stability and excellent interfacial compatibility on the MMMs. The results demonstrated that the composite filler with fast transport pathways designed in this study was an effective strategy to enhance gas separation performance of MMMs, verifying its application potential in the gas purification industry.

scholarly journals Membranes for Gas Separation Current Development and Challenges

2015 ◽  
Vol 773-774 ◽  
pp. 1085-1090 ◽  
Author(s):  
Norwahyu Jusoh ◽  
Yin Fong Yeong ◽  
Kok Keong Lau ◽  
Mohd Shariff Azmi
Keyword(s):  
Gas Separation ◽  
Polymeric Materials ◽  
Membrane Technology ◽  
Polymeric Membrane ◽  
Inorganic Membrane ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Inorganic Membranes ◽  
Mixed Matrix

—A new bang of natural gas demand has opened up the opportunities towards the utilization of membrane technology for the purification process.The advantages in terms of smaller footprint, lower weight, minimum utility requirement and low labor intensity make them appropriate for wide scale applications. Polymeric membrane is one of the greatest emerging fields in membrane material development. Nevertheless, the separation performance of the existing polymeric materials were reached a limit in the trade-off between permeability and selectivity. The development of inorganic material gives a significance improvement in membrane performance but it outrageously expensive for many applications and having complicated procedure during fabrication process have limit the application of inorganic membrane in gas separation. Thus, a rapid demand in membrane technology for gas separation and the effort toward seeking the membranes with higher permeability and selectivity has motivated the development of mixed matrix membrane. Mixed matrix membrane (MMM) which incorporating inorganic fillers in a polymer matrix is expected to overcome the limitations of the polymeric and inorganic membranes. Apart from an overview of the different membrane materials for gas separation, this paper also highlights the development of mixed matrix membrane and challenges in fabrication of mixed matrix membranes.

scholarly journals Interfacial Design of Mixed Matrix Membranes via Grafting PVA on UiO-66-NH2 to Enhance the Gas Separation Performance

Membranes ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 419
Author(s):  
Saeed Ashtiani ◽  
Mehdi Khoshnamvand ◽  
Chhabilal Regmi ◽  
Karel Friess
Keyword(s):  
Gas Separation ◽  
Reversible Reaction ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Poly Vinyl Alcohol ◽  
Separation Performance ◽  
Strong Impact ◽  
Mixed Matrix ◽  
Cross Sectional ◽  
Covalent Interaction

In this study, defect-free facilitated transport mixed matrix membrane (MMM) with high loading amount of UiO-66-NH2 nanoparticles as metal–organic frameworks (MOFs) was fabricated. The MOFs were covalently bonded with poly (vinyl alcohol) (PVA) to incorporate into a poly (vinyl amine) (PVAm) matrix solution. A uniform UiO-66-NH2 dispersion up to 55 wt.% was observed without precipitation and agglomeration after one month. This can be attributed to the high covalent interaction at interfaces of UiO-66-NH2 and PVAm, which was provided by PVA as a functionalized organic linker. The CO2 permeability and CO2/N2 and selectivity were significantly enhanced for the fabricated MMM by using optimal fabrication parameters. This improvement in gas performance is due to the strong impact of solubility and decreasing diffusion in obtained dense membrane to promote CO2 transport with a bicarbonate reversible reaction. Therefore, the highest amount of amine functional groups of PVAm among all polymers, plus the abundant amount of amines from UiO-66-NH2, facilitated the preferential CO2 permeation through the bicarbonate reversible reaction between CO2 and –NH2 in humidified conditions. XRD and FTIR were employed to study the MMM chemical structure and polymers–MOF particle interactions. Cross-sectional and surface morphology of the MMM was observed by SEM-EDX and 3D optical profilometer to detect the dispersion of MOFs into the polymer matrix and explore their interfacial morphology. This approach can be extended for a variety of polymer–filler interfacial designs for gas separation applications.

scholarly journals Fabrication and characterization of polyimide/ polyethersulfone-fumed silica mixed matrix membrane for gas separation

REAKTOR ◽  
2017 ◽  
Vol 11 (1) ◽  
pp. 30 ◽  
Author(s):  
A. F. Ismail ◽  
T. D. Kusworo
Keyword(s):  
Gas Separation ◽  
Fumed Silica ◽  
Inorganic Filler ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Mixed Matrix ◽  
Separation Membrane ◽  
Pes Membrane ◽  
Gas Separation Performance

This study is performed primarily to investigate the feasibility of fumed silica as inorganic material towards gas separation performance of mixed matrix membrane. In this study, polyimide/ polyethersulfone (PES)-fumed silica mixed matrix membrane were casted using dry/wet technique. The result from the FESEM, DSC and FTIR analysis confirmed that the structure and physical properties of membrane is influenced by inorganic filler. FESEM`s cross-section view indicated good compatibility  between polymer and fumed silica for all of range fumed silica used in this study. The gas separation performance of the mixed matrix membrane with fumed silica were relatively higher compared to that of the neat PI/PES membrane. PI/PES-fumed silica 5 wt% yielded significant selectivity enhancement of 7.21 and 40.47 for O2/N2, and CO2/CH4, respectively.Keywords:  gas separation membrane, mixed matrix membrane, silica

scholarly journals CARBON DIOXIDE/METHANE SEPARATION PERFORMANCE BY MIXED MATRIX MEMBRANE FROM POLYSULFONE/ HALLOYSITE NANOTUBES

2020 ◽  
Vol 82 (3) ◽  
Author(s):  
Noor Maizura Ismail ◽  
Nur Afaliza Yusaini ◽  
Jannah Jafa ◽  
S. M. Anisuzzaman ◽  
Chiam Chel Ken ◽  
...  
Keyword(s):  
Gas Separation ◽  
Halloysite Nanotubes ◽  
Skin Layer ◽  
Gas Permeation ◽  
Mixed Matrix Membranes ◽  
Inorganic Filler ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Mixed Matrix ◽  
Morphological Differences

Gas separation by using membrane-based technology is one of the rising technologies used in the industry. It has many advantages such as low in cost and energy consumption. However, this technology is limited because of the "trade-off" exists between permeability and selectivity of the membrane. Thus, in this study, an inorganic filler, halloysite nanotube is modified with 3-aminopropyl(triethoxysilane) and then incorporated into the polysulfone polymer and the performance of the mixed matrix membranes (MMMs) is investigated. MMMs were analyzed by using SEM, FTIR, tensile and gas permeation tests which studied the morphological differences, mechanical strength, and membrane permeability and selectivity towards CO2 and CH4 respectively. The performance of the MMMs was compared with neat membrane and MMMs with unmodified HNTs. SEM results show an increase of 111% on the thickness of the dense skin layer of MMMs with APTES-modified HNTs compared to the neat membrane and the MMMs with unmodified HNTs. Elongation at break for MMMs with 3-APTES-modified HNTs also increased to 24.22%. The gas separation performance of the MMMs with 3-APTES modified HNTs shows an overall increase of 25.37% in the membrane selectivity compared to MMMs with unmodified HNTs while when coating is done, the selectivity of the MMMs with 3-APTES modified HNTs shows an increase from 0.845 to 10.158 for a pressure of 2 bar showing that coating helps in increasing the selectivity of the membrane.

scholarly journals High Performance Gas Separation Mixed Matrix Membrane Fabricated by Incorporation of Functionalized Submicrometer-Sized Metal-Organic Framework

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1421 ◽  
Author(s):  
Baosheng Ge ◽  
Yanyan Xu ◽  
Haoru Zhao ◽  
Haixiang Sun ◽  
Yaoli Guo ◽  
...  
Keyword(s):  
Gas Separation ◽  
High Performance ◽  
Gas Adsorption ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Mixed Matrix ◽  
Sem Image ◽  
Metal Organic ◽  
Gas Separation Performance

Mixed matrix membranes (MMMs) attract great attention due to their outstanding gas separation performance. The compatibility between the fillers and the polymer matrix is one of the key points for the preparation of high-performance MMMs. In this work, MMMs consisting of metal-organic frameworks (MOFs) of amine-modified Cu-BTC (NH2-Cu-BTC; BTC = 1,3,5-benzenetricarboxylic acid) and submicrometer-sized amine-modified Cu-BTC (sub-NH2-Cu-BTC) incorporated into a Pebax-1657 polymer were fabricated for the gas separation. The SEM image and Fourier transform infrared spectroscopy (FTIR) spectra showed an increase in the surface roughness of MOFs and the presence of amino groups on the surface of Cu-BTC after the amination modification, and a decrease in the size of MOFs crystals after the submicrometer-sized aminated modification. Gas adsorption analysis indicated that NH2-Cu-BTC and sub-NH2-Cu-BTC had a higher gas adsorption capacity for CO2 compared to the unmodified Cu-BTC. The scanning electron microscopy (SEM) image showed that NH2-Cu-BTC and sub-NH2-Cu-BTC, especially sub-NH2-Cu-BTC, had a better compatibility with a polyether-block-amide (Pebax) matrix in the MMMs. The gas separation performance indicated that the Pebax/sub-NH2-Cu-BTC MMMs evidently improved the CO2/N2 and CO2/CH4 selectivity at the expense of a slight CO2 permeability. The results reveal that modified MOF-filled MMMs possess great potential for applications in the CO2 separation field.

scholarly journals THE EFFECT OF TYPE ZEOLITE ON THE GAS TRANSPORT PROPERTIES OF POLYIMIDE-BASED MIXED MATRIX MEMBRANES

REAKTOR ◽  
2008 ◽  
Vol 12 (2) ◽  
pp. 68 ◽  
Author(s):  
Tutuk Djoko Kusworo ◽  
Ahmad Fauzi Ismail ◽  
Azeman Mustafa ◽  
Kang Li
Keyword(s):  
Mixed Matrix Membranes ◽  
Mixed Matrix Membrane ◽  
Separation Performance ◽  
Mixed Matrix ◽  
Scanning Calorimetry ◽  
Zeolite 4A ◽  
Intensity Changes ◽  
Zeolite Type ◽  
Type Zeolite ◽  
Matrix Membranes

The permeation rates of O2, N2, CO2 and CH4 has been studied for polyimide-polyethersulfone (PI/PES) blends-zeolite mixed matrix membranes synthesized in our laboratory. The study investigated the effect of zeolite loading and different zeolite type on the gas separation performance of these mixed matrix membranes. Frequency shifts and absorption intensity changes in the FTIR spectra of the PI/PES blends as compared with those of the pure polymers indicate that there is a mixing of polymer blends at the molecular level. Differential scanning calorimetry measurements of pure and PI/PES blends membranes have showed one unique glass transition temperature that supports the miscible character of the PI/PES mixture. The PI/PES-zeolite 4A mixed matrix membrane with 25 wt % zeolite loading produced the highest O2/N2 and CO2/CH4 selectivity of around 7.45 and 46.05, respectively.

Sign in / Sign up

Export Citation Format

Share Document