scholarly journals Ultralight, Ultraflexible, Anisotropic, Highly Thermally Conductive Graphene Aerogel Films

Molecules ◽  
2021 ◽  
Vol 26 (22) ◽  
pp. 6867
Author(s):  
Zheng Liu ◽  
Qinsheng Wang ◽  
Linlin Hou ◽  
Yingjun Liu ◽  
Zheng Li
Keyword(s):  
Thermal Conductivity ◽  
Expansion Method ◽  
Graphene Aerogel ◽  
3D Graphene ◽  
Graphene Layers ◽  
Thermal Insulating ◽  
Graphene Films ◽  
High Anisotropy ◽  
Thermally Conductive ◽  
Aerogel Films

Graphene aerogels have attracted much attention as a promising material for various applications. The unusually high intrinsic thermal conductivity of individual graphene sheets makes an obvious contrast with the thermal insulating performance of assembled 3D graphene materials. We report the preparation of anisotropy 3D graphene aerogel films (GAFs) made from tightly packed graphene films using a thermal expansion method. GAFs with different thicknesses and an ultimate low density of 4.19 mg cm−3 were obtained. GAFs show high anisotropy on average cross-plane thermal conductivity (K⊥) and average in-plane thermal conductivity (K||). Additionally, uniaxially compressed GAFs performed a large elongation of 11.76% due to the Z-shape folding of graphene layers. Our results reveal the ultralight, ultraflexible, highly thermally conductive, anisotropy GAFs, as well as the fundamental evolution of macroscopic assembled graphene materials at elevated temperature.

scholarly journals A Continuous 3D-Graphene Network to Overcome Threshold Issues and Contact Resistance in Thermally Conductive Graphene Nanocomposites

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Federico Conrado ◽  
Matteo Pavese
Keyword(s):  
Thermal Conductivity ◽  
Matrix Composites ◽  
Infiltration Process ◽  
Graphene Nanocomposites ◽  
Transport Efficiency ◽  
3D Graphene ◽  
Graphene Flakes ◽  
Thermally Conductive ◽  
Isotropic Structure ◽  
Preferential Pathways

In order to overcome thermal resistance issues in polymeric matrix composites, self-standing graphene aerogels were synthetized and infiltrated with an epoxy resin, in order to create conductive preferential pathways through which heat can be easily transported. These continuous highly thermally conductive 3D-structures show, due to the high interconnection degree of graphene flakes, enhanced transport properties. Two kinds of aerogels were investigated, obtained by hydrothermal synthesis (HS) and ice-templated direct freeze synthesis (DFS). Following HS method an isotropic structure is obtained, and following DFS method instead an anisotropic arrangement of graphene flakes results. The density of the structure can be tuned leading to a different amount of graphene inside the final composite. The residual oxygen, known to be detrimental to thermal properties, was removed by thermal treatment before the infiltration process. With 1,25 wt.% of graphene, using HS method, the thermal conductivity of the polymeric resin was increased by 80%, suggesting that this technique is a valid route to improve the thermal performance of graphene-based composites. When preferential orientation of the filler was present (DFS case), thermal conductivity was increased more than 25% with a graphene content of only 0,27 wt.%, demonstrating that oriented structures can further improve the thermal transport efficiency.

A Novel Poly(Ionic Liquid) as the Thermal Insulating Material

2020 ◽  
Vol 13 (3) ◽  
pp. 241-247
Author(s):  
Wenxin Wei ◽  
Guifeng Ma ◽  
Hongtao Wang ◽  
Jun Li
Keyword(s):  
Thermal Conductivity ◽  
Ionic Liquid ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Flame Resistance ◽  
Insulating Material ◽  
Low Thermal Conductivity ◽  
Thermal Insulating ◽  
Poly Ionic Liquid

Objective: A new poly(ionic liquid)(PIL), poly(p-vinylbenzyltriphenylphosphine hexafluorophosphate) (P[VBTPP][PF6]), was synthesized by quaternization, anion exchange reaction, and free radical polymerization. Then a series of the PIL were synthesized at different conditions. Methods: The specific heat capacity, glass-transition temperature and melting temperature of the synthesized PILs were measured by differential scanning calorimeter. The thermal conductivities of the PILs were measured by the laser flash analysis method. Results: Results showed that, under optimized synthesis conditions, P[VBTPP][PF6] as the thermal insulator had a high glass-transition temperature of 210.1°C, high melting point of 421.6°C, and a low thermal conductivity of 0.0920 W m-1 K-1 at 40.0°C (it was 0.105 W m-1 K-1 even at 180.0°C). The foamed sample exhibited much low thermal conductivity λ=0.0340 W m-1 K-1 at room temperature, which was comparable to a commercial polyurethane thermal insulating material although the latter had a much lower density. Conclusion: In addition, mixing the P[VBTPP][PF6] sample into polypropylene could obviously increase the Oxygen Index, revealing its efficient flame resistance. Therefore, P[VBTPP][PF6] is a potential thermal insulating material.

Highly thermally conductive UHMWPE/NG composites with the segregated structure and their application for heat spreader

2020 ◽  
pp. 089270572096564
Author(s):  
Xiao Wang ◽  
Hui Lu ◽  
Jun Chen
Keyword(s):  
Thermal Conductivity ◽  
Laser Flash ◽  
Heating Process ◽  
X Ray Diffraction ◽  
Heat Spreader ◽  
Conductive Composites ◽  
Compression Direction ◽  
Thermal Analyzer ◽  
Thermally Conductive ◽  
Plane Direction

In this work, ultra-high molecular weight polyethylene (UHMWPE)/natural flake graphite (NG) polymer composites with the extraordinary high thermal conductivity were prepared by a facile mixed-heating powder method. Morphology observation and X-ray diffraction (XRD) tests revealed that the NG flakes could be more tightly coated on the surface of UHMWPE granules by mixed-heating process and align horizontally (perpendicular to the hot compression direction of composites). Laser flash thermal analyzer (LFA) demonstrated that the thermal conductivity (TC) of composites with 21.6 vol% of NG reached 19.87 W/(m·K) and 10.67 W/(m·K) in the in-plane and through-plane direction, respectively. Application experiment further demonstrated that UHMWPE/NG composites had strong capability to dissipate the heat as heat spreader. The obtained results provided a valuable basis for fabricating high thermal conductive composites which can act as advanced thermal management materials.

scholarly journals Enhancement of the Thermal Performance of the Paraffin-Based Microcapsules Intended for Textile Applications

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1120
Author(s):  
Virginija Skurkyte-Papieviene ◽  
Ausra Abraitiene ◽  
Audrone Sankauskaite ◽  
Vitalija Rubeziene ◽  
Julija Baltusnikaite-Guzaitiene
Keyword(s):  
Thermal Conductivity ◽  
Thermal Performance ◽  
Comparative Method ◽  
Multiwall Carbon Nanotubes ◽  
Acrylic Resin ◽  
Positive Influence ◽  
Outer Shell ◽  
Ir Camera ◽  
Spacer Fabric ◽  
Thermally Conductive

Phase changing materials (PCMs) microcapsules MPCM32D, consisting of a polymeric melamine-formaldehyde (MF) resin shell surrounding a paraffin core (melting point: 30–32 °C), have been modified by introducing thermally conductive additives on their outer shell surface. As additives, multiwall carbon nanotubes (MWCNTs) and poly (3,4-ethylenedioxyoxythiophene) poly (styrene sulphonate) (PEDOT: PSS) were used in different parts by weight (1 wt.%, 5 wt.%, and 10 wt.%). The main aim of this modification—to enhance the thermal performance of the microencapsulated PCMs intended for textile applications. The morphologic analysis of the newly formed coating of MWCNTs or PEDOT: PSS microcapsules shell was observed by SEM. The heat storage and release capacity were evaluated by changing microcapsules MPCM32D shell modification. In order to evaluate the influence of the modified MF outer shell on the thermal properties of paraffin PCM, a thermal conductivity coefficient (λ) of these unmodified and shell-modified microcapsules was also measured by the comparative method. Based on the identified optimal parameters of the thermal performance of the tested PCM microcapsules, a 3D warp-knitted spacer fabric from PET was treated with a composition containing 5 wt.% MWCNTs or 5 wt.% PEDOT: PSS shell-modified microcapsules MPCM32D and acrylic resin binder. To assess the dynamic thermal behaviour of the treated fabric samples, an IR heating source and IR camera were used. The fabric with 5 wt.% MWCNTs or 5 wt.% PEDOT: PSS in shell-modified paraffin microcapsules MPCM32D revealed much faster heating and significantly slower cooling compared to the fabric treated with the unmodified ones. The thermal conductivity of the investigated fabric samples with modified microcapsules MPCM32D has been improved in comparison to the fabric samples with unmodified ones. That confirms the positive influence of using thermally conductive enhancing additives for the heat transfer rate within the textile sample containing these modified paraffin PCM microcapsules.

scholarly journals Advances in Liquid Crystalline Epoxy Resins for High Thermal Conductivity

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1302
Author(s):  
Younggi Hong ◽  
Munju Goh
Keyword(s):  
Thermal Conductivity ◽  
Network Structure ◽  
Epoxy Resins ◽  
Liquid Crystalline ◽  
Random Network ◽  
Three Dimensional ◽  
Heat Insulator ◽  
Liquid Crystalline Epoxy ◽  
Thermally Conductive ◽  
Substantial Interest

Epoxy resin (EP) is one of the most famous thermoset materials. In general, because EP has a three-dimensional random network, it possesses thermal properties similar to those of a typical heat insulator. Recently, there has been substantial interest in controlling the network structure of EP to create new functionalities. Indeed, the modified EP, represented as liquid crystalline epoxy (LCE), is considered promising for producing novel functionalities, which cannot be obtained from conventional EPs, by replacing the random network structure with an oriented one. In this paper, we review the current progress in the field of LCEs and their application to highly thermally conductive composite materials.

scholarly journals Improving the Actuation Speed and Multi-Cyclic Actuation Characteristics of Silicone/Ethanol Soft Actuators

Actuators ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 62 ◽  
Author(s):  
Boxi Xia ◽  
Aslan Miriyev ◽  
Cesar Trujillo ◽  
Neil Chen ◽  
Mark Cartolano ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Short Term Memory ◽  
Conductive Filler ◽  
Thermally Driven ◽  
Thermally Conductive ◽  
Ethanol Evaporation ◽  
Long Short Term Memory ◽  
Soft Actuators ◽  
Robotic Applications ◽  
Soft Composite

The actuation of silicone/ethanol soft composite material-actuators is based on the phase change of ethanol upon heating, followed by the expansion of the whole composite, exhibiting high actuation stress and strain. However, the low thermal conductivity of silicone rubber hinders uniform heating throughout the material, creating overheated damaged areas in the silicone matrix and accelerating ethanol evaporation. This limits the actuation speed and the total number of operation cycles of these thermally-driven soft actuators. In this paper, we showed that adding 8 wt.% of diamond nanoparticle-based thermally conductive filler increases the thermal conductivity (from 0.190 W/mK to 0.212 W/mK), actuation speed and amount of operation cycles of silicone/ethanol actuators, while not affecting the mechanical properties. We performed multi-cyclic actuation tests and showed that the faster and longer operation of 8 wt.% filler material-actuators allows collecting enough reliable data for computational methods to model further actuation behavior. We successfully implemented a long short-term memory (LSTM) neural network model to predict the actuation force exerted in a uniform multi-cyclic actuation experiment. This work paves the way for a broader implementation of soft thermally-driven actuators in various robotic applications.

scholarly journals Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal

2021 ◽  
Author(s):  
Chongjian Zhou ◽  
Yong Kyu Lee ◽  
Yuan Yu ◽  
Sejin Byun ◽  
Zhong-Zhen Luo ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Single Crystal ◽  
High Performance ◽  
Figure Of Merit ◽  
Waste Heat ◽  
Electric Energy ◽  
Cost Effective ◽  
Tin Selenide ◽  
Tin Oxides ◽  
Thermally Conductive

AbstractThermoelectric materials generate electric energy from waste heat, with conversion efficiency governed by the dimensionless figure of merit, ZT. Single-crystal tin selenide (SnSe) was discovered to exhibit a high ZT of roughly 2.2–2.6 at 913 K, but more practical and deployable polycrystal versions of the same compound suffer from much poorer overall ZT, thereby thwarting prospects for cost-effective lead-free thermoelectrics. The poor polycrystal bulk performance is attributed to traces of tin oxides covering the surface of SnSe powders, which increases thermal conductivity, reduces electrical conductivity and thereby reduces ZT. Here, we report that hole-doped SnSe polycrystalline samples with reagents carefully purified and tin oxides removed exhibit an ZT of roughly 3.1 at 783 K. Its lattice thermal conductivity is ultralow at roughly 0.07 W m–1 K–1 at 783 K, lower than the single crystals. The path to ultrahigh thermoelectric performance in polycrystalline samples is the proper removal of the deleterious thermally conductive oxides from the surface of SnSe grains. These results could open an era of high-performance practical thermoelectrics from this high-performance material.

Measuring the Thermal Conductivity of Porous, Transparent SiO2 Films With Time Domain Thermoreflectance

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
Patrick E. Hopkins ◽  
Bryan Kaehr ◽  
Leslie M. Phinney ◽  
Timothy P. Koehler ◽  
Anne M. Grillet ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Time Domain ◽  
Optical Measurements ◽  
Conductivity Measurements ◽  
Glass Slides ◽  
Thermally Conductive ◽  
Surface Variability ◽  
Porous Nanomaterials ◽  
Structural Aspects ◽  
Nanoporous Structures

Nanocomposites offer unique capabilities of controlling thermal transport through the manipulation of various structural aspects of the material. However, measurements of the thermal properties of these composites are often difficult, especially porous nanomaterials. Optical measurements of these properties, although ideal due to the noncontact nature, are challenging due to the large surface variability of nanoporous structures. In this work, we use a vector-based thermal algorithm to solve for the temperature change and heat transfer in which a thin film subjected to a modulated heat source is sandwiched between two thermally conductive pathways. We validate our solution with time domain thermoreflectance measurements on glass slides and extend the thermal conductivity measurements to SiO2-based nanostructured films.

Thermal Design of Highly-Efficient Thermoelectric Materials With Atomic-Scale Three-Dimensional Phononic Crystals

2007 ◽  
Author(s):  
Jean-Numa Gillet ◽  
Yann Chalopin ◽  
Sebastian Volz
Keyword(s):  
Thermal Conductivity ◽  
Bulk Material ◽  
Phononic Crystal ◽  
Three Dimensional ◽  
Mean Free Path ◽  
Dispersion Curves ◽  
Phononic Crystals ◽  
Thermal Design ◽  
Atomic Scale ◽  
Thermal Insulating

Owing to their thermal insulating properties, superlattices have been extensively studied. A breakthrough in the performance of thermoelectric devices was achieved by using superlattice materials. The problem of those nanostructured materials is that they mainly affect heat transfer in only one direction. In this paper, the concept of canceling heat conduction in the three spatial directions by using atomic-scale three-dimensional (3D) phononic crystals is explored. A period of our atomic-scale 3D phononic crystal is made up of a large number of diamond-like cells of silicon atoms, which form a square supercell. At the center of each supercell, we substitute a smaller number of Si diamond-like cells by other diamond-like cells, which are composed of germanium atoms. This elementary heterostructure is periodically repeated to form a Si/Ge 3D nanostructure. To obtain different atomic configurations of the phononic crystal, the number of Ge diamond-like cells at the center of each supercell can be varied by substitution of Si diamond-like cells. The dispersion curves of those atomic configurations can be computed by lattice dynamics. With a general equation, the thermal conductivity of our atomic-scale 3D phononic crystal can be derived from the dispersion curves. The thermal conductivity can be reduced by at least one order of magnitude in an atomic-scale 3D phononic crystal compared to a bulk material. This reduction is due to the decrease of the phonon group velocities without taking into account that of the phonon average mean free path.

Sign in / Sign up

Export Citation Format

Share Document