scholarly journals Nanoscale Strontium-Substituted Hydroxyapatite Pastes and Gels for Bone Tissue Regeneration

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1611
Author(s):  
Caroline J. Harrison ◽  
Paul V. Hatton ◽  
Piergiorgio Gentile ◽  
Cheryl A. Miller
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Culture Media ◽  
Full Range ◽  
Sol Gel ◽  
Tissue Growth ◽  
Bone Tissue Regeneration ◽  
Tissue Culture Media ◽  
Bone Deposition

Injectable nanoscale hydroxyapatite (nHA) systems are highly promising biomaterials to address clinical needs in bone tissue regeneration, due to their excellent biocompatibility, bioinspired nature, and ability to be delivered in a minimally invasive manner. Bulk strontium-substituted hydroxyapatite (SrHA) is reported to encourage bone tissue growth by stimulating bone deposition and reducing bone resorption, but there are no detailed reports describing the preparation of a systematic substitution up to 100% at the nanoscale. The aim of this work was therefore to fabricate systematic series (0–100 atomic% Sr) of SrHA pastes and gels using two different rapid-mixing methodological approaches, wet precipitation and sol-gel. The full range of nanoscale SrHA materials were successfully prepared using both methods, with a measured substitution very close to the calculated amounts. As anticipated, the SrHA samples showed increased radiopacity, a beneficial property to aid in vivo or clinical monitoring of the material in situ over time. For indirect methods, the greatest cell viabilities were observed for the 100% substituted SrHA paste and gel, while direct viability results were most likely influenced by material disaggregation in the tissue culture media. It was concluded that nanoscale SrHAs were superior biomaterials for applications in bone surgery, due to increased radiopacity and improved biocompatibility.

Ca2+-in vivo doped biosilica from living Thalassiosira weissflogii diatoms: investigation on Saos-2 biocompatibility

MRS Advances ◽  
2017 ◽  
Vol 2 (19-20) ◽  
pp. 1047-1058 ◽  
Author(s):  
G. Leone ◽  
D. Vona ◽  
M. Lo Presti ◽  
L. Urbano ◽  
S. Cicco ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Tissue Growth ◽  
Bone Tissue Regeneration ◽  
Nanostructured Surface ◽  
Biological Matter ◽  
Ameliorative Effect ◽  
Edx Analyses ◽  
Micro Structures

ABSTRACTDiatoms represent a natural source of mesoporous silica whose applications range from biomedical to photonic fields. Porous hierarchically organized micro structures, the biosilica shells called frustules, can be obtained by removal of the organic biological matter from the unicellular living algae. Diatoms frustules have been investigated as scaffold for bone tissue growth taking advantage of their nanostructured surface and of the possibility to chemically modify the biosilica. Here we report on an easy way to calcium-doped biosilica supports for bone tissue regeneration by in vivo feeding the algae. FTIR and EDX analyses confirmed the incorporation of calcium into the mesopouros biosilica. Cell viability studies showed an ameliorative effect on the Saos-2 cells spreading compared with the cells grown on non-doped biosilica supports.

Lactoferrin in Bone Tissue Regeneration

2020 ◽  
Vol 27 (6) ◽  
pp. 838-853 ◽  
Author(s):  
Madalina Icriverzi ◽  
Valentina Dinca ◽  
Magdalena Moisei ◽  
Robert W. Evans ◽  
Mihaela Trif ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Cells ◽  
Bone Diseases ◽  
Biologically Active Compounds ◽  
Biologically Active ◽  
Bone Tissue Regeneration ◽  
Bone Homeostasis ◽  
Active Compounds

: Among the multiple properties exhibited by lactoferrin (Lf), its involvement in bone regeneration processes is of great interest at the present time. A series of in vitro and in vivo studies have revealed the ability of Lf to promote survival, proliferation and differentiation of osteoblast cells and to inhibit bone resorption mediated by osteoclasts. Although the mechanism underlying the action of Lf in bone cells is still not fully elucidated, it has been shown that its mode of action leading to the survival of osteoblasts is complemented by its mitogenic effect. Activation of several signalling pathways and gene expression, in an LRPdependent or independent manner, has been identified. Unlike the effects on osteoblasts, the action on osteoclasts is different, with Lf leading to a total arrest of osteoclastogenesis. : Due to the positive effect of Lf on osteoblasts, the potential use of Lf alone or in combination with different biologically active compounds in bone tissue regeneration and the treatment of bone diseases is of great interest. Since the bioavailability of Lf in vivo is poor, a nanotechnology- based strategy to improve the biological properties of Lf was developed. The investigated formulations include incorporation of Lf into collagen membranes, gelatin hydrogel, liposomes, loading onto nanofibers, porous microspheres, or coating onto silica/titan based implants. Lf has also been coupled with other biologically active compounds such as biomimetic hydroxyapatite, in order to improve the efficacy of biomaterials used in the regulation of bone homeostasis. : This review aims to provide an up-to-date review of research on the involvement of Lf in bone growth and healing and on its use as a potential therapeutic factor in bone tissue regeneration.

scholarly journals Surface-Modified Poly(l-lactide-co-glycolide) Scaffolds for the Treatment of Osteochondral Critical Size Defects—In Vivo Studies on Rabbits

2020 ◽  
Vol 21 (20) ◽  
pp. 7541
Author(s):  
Małgorzata Krok-Borkowicz ◽  
Katarzyna Reczyńska ◽  
Łucja Rumian ◽  
Elżbieta Menaszek ◽  
Maciej Orzelski ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Photoelectron Spectroscopy ◽  
Sessile Drop ◽  
Bone Tissue Regeneration ◽  
In Vivo Studies ◽  
In Vivo Model ◽  
Type I ◽  
X Ray

Poly(l-lactide-co-glycolide) (PLGA) porous scaffolds were modified with collagen type I (PLGA/coll) or hydroxyapatite (PLGA/HAp) and implanted in rabbits osteochondral defects to check their biocompatibility and bone tissue regeneration potential. The scaffolds were fabricated using solvent casting/particulate leaching method. Their total porosity was 85% and the pore size was in the range of 250–320 µm. The physico-chemical properties of the scaffolds were evaluated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), sessile drop, and compression tests. Three types of the scaffolds (unmodified PLGA, PLGA/coll, and PLGA/HAp) were implanted into the defects created in New Zealand rabbit femoral trochlears; empty defect acted as control. Samples were extracted after 1, 4, 12, and 26 weeks from the implantation, evaluated using micro-computed tomography (µCT), and stained by Masson–Goldner and hematoxylin-eosin. The results showed that the proposed method is suitable for fabrication of highly porous PLGA scaffolds. Effective deposition of both coll and HAp was confirmed on all surfaces of the pores through the entire scaffold volume. In the in vivo model, PLGA and PLGA/HAp scaffolds enhanced tissue ingrowth as shown by histological and morphometric analyses. Bone formation was the highest for PLGA/HAp scaffolds as evidenced by µCT. Neo-tissue formation in the defect site was well correlated with degradation kinetics of the scaffold material. Interestingly, around PLGA/coll extensive inflammation and inhibited tissue healing were detected, presumably due to immunological response of the host towards collagen of bovine origin. To summarize, PLGA scaffolds modified with HAp are the most promising materials for bone tissue regeneration.

Poly(glycerol sebacate)-modified polylactic acid scaffolds with improved hydrophilicity, mechanical strength and bioactivity for bone tissue regeneration

RSC Advances ◽  
2015 ◽  
Vol 5 (97) ◽  
pp. 79703-79714 ◽  
Author(s):  
Hengsong Shi ◽  
Qi Gan ◽  
Xiaowei Liu ◽  
Yifan Ma ◽  
Jun Hu ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Bone Tissue ◽  
Polylactic Acid ◽  
Tissue Regeneration ◽  
Biomedical Engineering ◽  
Bone Tissue Regeneration ◽  
Engineering Applications

Polylactic acid (PLA) has been extensively researched in biomedical engineering applications due to its superior mechanical strength and biocompatibility in vivo.

Enhancing in vitro bioactivity and in vivo osteogenesis of organic–inorganic nanofibrous biocomposites with novel bioceramics

2014 ◽  
Vol 2 (37) ◽  
pp. 6293-6305 ◽  
Author(s):  
Tao Liu ◽  
Xinbo Ding ◽  
Dongzhi Lai ◽  
Yongwei Chen ◽  
Ridong Zhang ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Biological Properties ◽  
Bone Tissue Regeneration ◽  
In Vitro Bioactivity ◽  
Physicochemical And Biological Properties

MGHA-introduced, an electrospun SF-based composite can exhibit improved physicochemical and biological properties to stimulate bone tissue regeneration and repair.

Sign in / Sign up

Export Citation Format

Share Document