scholarly journals Superhydrophobic Polytetrafluoroethylene/Heat-Shrinkable Polyvinyl Chloride Composite Film with Super Anti-Icing Property

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 805 ◽  
Author(s):  
Zhiqing Jiang ◽  
Xueqin Wang ◽  
Huiying Jia ◽  
Yanfen Zhou ◽  
Jianwei Ma ◽  
...  
Keyword(s):  
Composite Film ◽  
Wind Turbine ◽  
Polyvinyl Chloride ◽  
Adhesive Strength ◽  
Turbine Blades ◽  
Composite Films ◽  
Wind Turbine Blades ◽  
Water Contact ◽  
Plasma Pretreatment ◽  
Good Adhesive

Wind power generation is an environmentally friendly way to produce electricity, but wind turbine blades that are prone to freeze in winter will reduce the efficiency of the generator. Therefore, the preparation of anti-icing blades is important and essential. Herein, anti-icing polytetrafluoroethylene (PTFE)/heat-shrinkable polyvinyl chloride (HSPVC) composite film was prepared by depositing a PTFE coating on the surface of HSPVC film via vacuum thermal evaporation. HSPVC films were pretreated respectively by argon and carbon tetrafluoride (CF4) plasma cleaning to introduce new groups and change their surface energy. After that, PTFE coating with a thickness of about 4 μm was deposited on the surface of HSPVC, obtaining a superhydrophobic surface with an apparent water contact angle of 150°. The results demonstrated that the breaking strength of the PTFE/HSPVC composite film using CF4 plasma pretreatment decreased by only 3.47% after exposing to ultraviolet light with the power of 1000 W for 5 min, suggesting an excellent anti-ultraviolet property. Furthermore, compared with the pristine films, the PTFE/HSPVC composite films exhibited better adhesive strength, super anti-icing property even after 10 icing–deicing cycles, and excellent dynamic anti-icing performance. The PTFE/HSPVC composite film with good adhesive strength, anti-ultraviolet, and anti-icing properties has prospective applications in packaging of wind turbine blades.

scholarly journals Preparation and Anti-Icing of Hydrophobic Polypyrrole Coatings on Wind Turbine Blade

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Bin Qu ◽  
Zhou Sun ◽  
Fang Feng ◽  
Yan Li ◽  
Guoqiang Tong ◽  
...  
Keyword(s):  
Contact Angle ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Water Contact Angle ◽  
Turbine Blades ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Water Contact

This paper describes the method of preparing strong hydrophobic polypyrrole (PPy) on wind turbine blades. The water contact angle of strong hydrophobic PPy coatings was 127.2°. The strong hydrophobic PPy coatings exhibited excellent anti-icing properties. The maximum icing weight of strong hydrophobic PPy coating blade was almost 0.10 g while the maximum icing weight of no coating blade was found to be 26.13 g. The maximum icing thickness of a strong hydrophobic PPy coating blade was only 1.08 mm. The current research will provide a better technique to create anti-icing coatings on wind turbine blades and other outdoor equipment.

Experiments of Wind Turbine Blades with Rocket Triggered Lightning

2009 ◽  
Vol 129 (5) ◽  
pp. 689-695
Author(s):  
Masayuki Minowa ◽  
Shinichi Sumi ◽  
Masayasu Minami ◽  
Kenji Horii
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Triggered Lightning

Folding of flexible hinges for aircraft wingtips and wind turbine blades

2021 ◽  
Author(s):  
Aileen G. Bowen Perez ◽  
Giovanni Zucco ◽  
Paul Weaver
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Wind Turbine Blades

Evaluation of the influence of wind speed and angle of attack on the aerodynamic effect of wind turbine blades

2017 ◽  
Author(s):  
Salete Alves ◽  
Luiz Guilherme Vieira Meira de Souza ◽  
Edália Azevedo de Faria ◽  
Maria Thereza dos Santos Silva ◽  
Ranaildo Silva
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Wind Turbine Blades ◽  
Aerodynamic Effect

scholarly journals Rain Erosion Maps for Wind Turbines Based on Geographical Locations: A Case Study in Ireland and Britain

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
K. Pugh ◽  
M. M. Stack
Keyword(s):  
Wind Turbine ◽  
Western Europe ◽  
Meteorological Data ◽  
Turbine Blades ◽  
Weather Conditions ◽  
Annual Rainfall ◽  
Wind Turbine Blades ◽  
Weather Patterns ◽  
The Uk

AbstractErosion rates of wind turbine blades are not constant, and they depend on many external factors including meteorological differences relating to global weather patterns. In order to track the degradation of the turbine blades, it is important to analyse the distribution and change in weather conditions across the country. This case study addresses rainfall in Western Europe using the UK and Ireland data to create a relationship between the erosion rate of wind turbine blades and rainfall for both countries. In order to match the appropriate erosion data to the meteorological data, 2 months of the annual rainfall were chosen, and the differences were analysed. The month of highest rain, January and month of least rain, May were selected for the study. The two variables were then combined with other data including hailstorm events and locations of wind turbine farms to create a general overview of erosion with relation to wind turbine blades.

Sign in / Sign up

Export Citation Format

Share Document