scholarly journals Analysis of a Thermal Energy Storage Tank in a Large District Cooling System: A Case Study

Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1158 ◽  
Author(s):  
Mohd Amin Abd Majid ◽  
Masdi Muhammad ◽  
Chima Cyril Hampo ◽  
Ainul Bt Akmar
Keyword(s):  
Energy Storage ◽  
Temperature Distribution ◽  
Water Temperature ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Tank ◽  
Performance Parameter ◽  
Hot Water ◽  
Sensor Data ◽  
Cool Water

This study’s primary goal is to evaluate the performance of a large thermal energy storage tank installed in a Gas District Cooling (GDC) plant. The performance parameters considered in this study include thermocline thickness (WTc), Cumulated Charge (Qcum), and Half Figure of Merit (½ FOM). The operation sensor data of a large Thermal Energy Storage (TES) tank was acquired for this analysis. The recorded temperature sensor from the 1st to 7th January and from 12th to 17th October 2019 was considered in this research. GraphPad prism computer software was deployed for analyses, and the temperature distribution data were analyzed to determine the four temperature parameters (hot water temperature (Th), cool water temperature (Tc), cool water depth (C), and slope gradient (S)) using a non-linear regression curve fitting technique and sigmoid Dose Responses function as integrated with the software. At the end of this research, the relationship between the growth of the determined performance parameter with charging hours was analyzed and presented. The research results proved the ability of GraphPad Prism software to assess the temperature distribution in the TES tank and also the corresponding effects on the overall Tank performance. The software offers better advantages in evaluating the performance parameter of the TES tank accurately.

scholarly journals Development and experimental testing of a compact thermal energy storage tank using paraffin targeting domestic hot water production needs

2020 ◽  
Vol 19 ◽  
pp. 100573 ◽  
Author(s):  
George Dogkas ◽  
John Konstantaras ◽  
Maria K. Koukou ◽  
Michail Gr. Vrachopoulos ◽  
Christos Pagkalos ◽  
...  
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Tank ◽  
Experimental Testing ◽  
Hot Water ◽  
Water Production ◽  
Domestic Hot Water

scholarly journals Domestic hot water consumption vs. solar thermal energy storage: The optimum size of the storage tank

2012 ◽  
Vol 97 ◽  
pp. 897-906 ◽  
Author(s):  
M.C. Rodríguez-Hidalgo ◽  
P.A. Rodríguez-Aumente ◽  
A. Lecuona ◽  
M. Legrand ◽  
R. Ventas
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Water Consumption ◽  
Thermal Energy Storage ◽  
Storage Tank ◽  
Hot Water ◽  
Solar Thermal ◽  
Optimum Size ◽  
Solar Thermal Energy ◽  
Domestic Hot Water

Experimental Testing of a Thermoelectric-Based Hydronic Cooling and Heating Device With Transient Charging of Sensible Thermal Energy Storage Water Tank

2008 ◽  
Author(s):  
Michael J. Kazmierczak ◽  
Sreenidhi Krishnamoorthy ◽  
Abhishek Gupta
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Heat Pump ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Tank ◽  
Hot Water ◽  
System Component ◽  
Water Tank ◽  
Te Modules

Experiments were performed to charge either cold or hot water thermal energy storage tanks using a heat exchanger equipped with multiple thermoelectric (TE) modules. The primary objective was to design a simple, but effective, modular Peltier heat pump system component to provide chilled or hot water for domestic use at the appliance level, and when arranged in multiple unit combinations, a system that can potentially satisfy small home cooling and heating requirements. Moreover, when the TEs are directly energized using solar PV panels, the system provides a renewable, pollution free and off-the-grid solution to supplement home energy needs. The present work focuses on the design and testing of a thermoelectric heat exchanger component that consists of two water channels machined from two aluminum plates with an array of three or five thermoelectric modules placed in between to transiently cool and/or heat the water in the thermal energy storage tank. The water passing over either the cold or hot side of the TE modules is recirculated to charge the cold or hot thermal storage tank, respectively. The temperatures in the prototype Peltier heat exchanger test component and thermal energy water storage tank were measured during both cold tank charging and hot tank charging operation. The thermal efficiencies of TE heat pump cooling/heating system are reported. The effects of TE power input, number of TE units and rate of fluid flow are studied.

Experimental Testing of a Thermoelectric-Based Hydronic Cooling and Heating Device With Transient Charging of Sensible Thermal Energy Storage Water Tank

2009 ◽  
Vol 1 (4) ◽  
Author(s):  
Michael J. Kazmierczak ◽  
Sreenidhi Krishnamoorthy ◽  
Abhishek Gupta
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Heat Pump ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Tank ◽  
Hot Water ◽  
System Component ◽  
Water Tank ◽  
Te Modules

Experiments were performed to charge either cold or hot water thermal energy storage tanks using a heat exchanger equipped with multiple thermoelectric (TE) modules. The primary objective was to design a simple, but effective, modular Peltier heat pump system component to provide chilled or hot water for domestic use at the appliance level, and when arranged in multiple unit combinations, a system that can potentially satisfy small home cooling and heating requirements. Moreover, when the TEs are directly energized using solar photovoltaic (PV) panels, the system provides a renewable, pollution-free, and off-the-grid solution to supplement home energy needs. The present work focuses on the design and testing of a thermoelectric heat exchanger component that consists of two water channels machined from two aluminum plates with an array of three, five, or eight thermoelectric modules placed in between to transiently cool and/or heat the water in the thermal energy storage tank. The water passing over either the cold or hot side of the TE modules is recirculated to charge the cold or hot thermal storage tank, respectively. The temperatures in the prototype Peltier heat exchanger test component and thermal energy water storage tank were measured during both cold and hot tank charging operations. The thermal efficiencies of the TE heat pump cooling/heating system are reported. The effects of the TE power input, number of TE units, rate of fluid flow, and heat sink/source temperature are studied.

scholarly journals Self-Sufficiency and Energy Savings of Renewable Thermal Energy Systems for an Energy-Sharing Community

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4284
Author(s):  
Min-Hwi Kim ◽  
Youngsub An ◽  
Hong-Jin Joo ◽  
Dong-Won Lee ◽  
Jae-Ho Yun
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Energy Systems ◽  
Hot Water ◽  
Pump System ◽  
Ground Source Heat Pumps ◽  
Self Sufficiency ◽  
Energy Sharing

Due to increased grid problems caused by renewable energy systems being used to realize zero energy buildings and communities, the importance of energy sharing and self-sufficiency of renewable energy also increased. In this study, the energy performance of an energy-sharing community was investigated to improve its energy efficiency and renewable energy self-sufficiency. For a case study, a smart village was selected via detailed simulation. In this study, the thermal energy for cooling, heating, and domestic hot water was produced by ground source heat pumps, which were integrated with thermal energy storage (TES) with solar energy systems. We observed that the ST system integrated with TES showed higher self-sufficiency with grid interaction than the PV and PVT systems. This was due to the heat pump system being connected to thermal energy storage, which was operated as an energy storage system. Consequently, we also found that the ST system had a lower operating energy, CO2 emissions, and operating costs compared with the PV and PVT systems.

A Geothermal Energy Concept based on Heat Storage in Geological Media

2021 ◽  
Author(s):  
Rubén Vidal ◽  
Maarten W. Saaltink ◽  
Sebastià Olivella
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Energy Demand ◽  
Ground Deformation ◽  
Hot Water ◽  
Energy Deficit ◽  
Good Tool ◽  
Aquifer Thermal Energy Storage ◽  
Low Efficiency

<p>Aquifer Thermal Energy Storage (ATES) can help to balance energy demand and supply to make better use of infrastructures and resources. ATES consists of a pair or more wells that simultaneously inject or extract thermal energy into aquifers. The aim of ATES is to store the excess of energy during summer and to reuse it during winter, when there is an energy deficit. High-temperature Aquifer Thermal Energy Storage (HT-ATES) provides a good option to store water over 50°C, but it requires facing some problems, such as low efficiency recoveries and the uplift of the surface. Coupled thermo-hydro-mechanical (THM) modelling is a good tool to analyze the viability and cost effectiveness of the HT-ATES systems and understand the interaction of processes, such as heat flux, groundwater flow and ground deformation. We present the 3D THM modelling of a pilot HT-ATES system, inspired by one of the projects of HEATSTORE, which is a GEOTHERMICA ERA-NET co-funded project. The model aims to simulate the injection of hot water of 90°C in a central well and the extraction of water in four auxiliary wells during summer. In winter, the auxiliary wells inject water of 50°C and the central well extract water. The loading lasts longer than the unloading (8 months versus 4 months) and overall more heat is injected than extracted. We found that the system is more efficient in terms of energy recovery, the more years the system is operating. In the aquifer, both thermal loads and hydraulic loads have an important role in terms of displacements. At the surface, the vertical displacements are only a consequence of the hydraulic strains generated by the injection of water in the aquifer.</p>

Sign in / Sign up

Export Citation Format

Share Document