scholarly journals A High-Order EMSIW MIMO Antenna for Space-Constrained 5G Smartphone

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8350
Author(s):  
Sayyed A. Ali ◽  
Mohd Wajid ◽  
Mohammed Usman ◽  
Muhammad S. Alam
Keyword(s):  
Low Cost ◽  
Detailed Comparison ◽  
High Order ◽  
Design Solution ◽  
Radiation Characteristics ◽  
Mimo Antenna ◽  
Diversity Techniques ◽  
Proximity Analysis ◽  
Pattern Diversity ◽  
New Radio

This paper proposes a high-order MIMO antenna operating at 3.5 GHz for a 5G new radio. Using an eighth-mode substrate integrated waveguide (EMSIW) cavity and considering a typical smartphone scenario, a two-element MIMO antenna is developed and extended to a twelve-element MIMO. These MIMO elements are closely spaced, and by employing multiple diversity techniques, high isolation is achieved without using a decoupling network. The asymmetric EMSIW structures resulted in radiation pattern diversity, and their orthogonal placement provides polarization diversity. The radiation characteristics and diversity performance are parametrically optimized for a two-element MIMO antenna. The experimental results exhibited 6.0 dB and 10.0 dB bandwidths of 250 and 100 MHz, respectively. The measured and simulated radiation patterns are closely matched with a peak gain of 3.4 dBi and isolation ≥36 dB. Encouraged with these results, higher-order MIMO, namely, four- and twelve-element MIMO are investigated, and isolation ≥35 and ≥22 dB are achieved, respectively. The channel capacity is found equal to 56.37 bps/Hz for twelve-element MIMO, which is nearly 6.25 times higher than the two-element counterpart. The hand and head proximity analysis reveal that the proposed antenna performances are within the acceptable limit. A detailed comparison with the previous works demonstrates that the proposed antenna offers a simple, low-cost, and compact MIMO antenna design solution with a high diversity performance.

scholarly journals E-Shaped H-Slotted Dual Band mmWave Antenna for 5G Technology

Electronics ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1019
Author(s):  
Kiran Raheel ◽  
Ahsan Altaf ◽  
Arbab Waheed ◽  
Saad Hassan Kiani ◽  
Daniyal Ali Sehrai ◽  
...  
Keyword(s):  
Low Cost ◽  
Detailed Comparison ◽  
Antenna System ◽  
Dual Band ◽  
Network Analyzer ◽  
Mimo Antenna ◽  
Full Wave ◽  
Radiating Element ◽  
The Mean ◽  
5G Systems

The aim of this work is to propose a dual band millimeter wave (mmwave) MIMO antenna system for 5G technology. In addition, the arrangement of the antenna elements in an array should be in such a manner that without using the traditional decoupling structures and/or techniques, a reasonable isolation level must be achieved. To demonstrate this, a system consists of four radiating elements that are etched on a 0.508 mm-thick Rogers-5880 substrate. The dielectric constant of the substrate is 2.2 and the loss tangent is 0.0009. Each radiating element consists of three parts; an E-shaped patch, an H-shaped slot within a patch, and a transmission line. The system is resonating at two different mmwave frequencies, i.e., 28 GHz and 38 GHz with a minimum port isolation of 28 dB. The mean measured gain is found to be at 7.1 dBi at 28 GHz and 7.9 dBi at 38 GHz with average efficiency, and envelope correlation coefficient (ECC) of the system at 70%, and 0.0005 respectively. The proposed system is designed and simulated in a full-wave electromagnetic wave software Computer Simulation Technology (CST), fabricated using LPKF D104 milling machine, and measured using R&SZNA67 vector network analyzer. An excellent agreement is observed between the simulated and the measured results and a detailed comparison with the previous works is also presented. Due to attributes such as low-cost, easy to fabricate, and dual-band, it is believed that this system will find its application for future 5G systems.

scholarly journals COMPACT DUAL BAND-NOTCHED UWB MIMO ANTENNA FOR USB DONGLE APPLICATION WITH PATTERN DIVERSITY CHARACTERISTICS

2018 ◽  
Vol 87 ◽  
pp. 87-96 ◽  
Author(s):  
Deepika Sipal ◽  
Mahesh Pandurang Abegaonkar ◽  
Shiban Kishen Koul
Keyword(s):  
Dual Band ◽  
Mimo Antenna ◽  
Pattern Diversity

scholarly journals A Compact UWB Indoor and Through-Wall Radar with Precise Ranging and Tracking

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
Yinan Yu ◽  
Jian Yang ◽  
Tomas McKelvey ◽  
Borys Stoew
Keyword(s):  
Signal Processing ◽  
Theoretical Analysis ◽  
Short Range ◽  
Indoor Environment ◽  
Low Cost ◽  
Moving Target ◽  
Radiation Characteristics ◽  
Uwb Radar ◽  
Signal Processing Algorithms ◽  
Processing Algorithms

Ultrawideband (UWB) technology has many advantages compared to its narrowband counterpart in many applications. We present a new compact low-cost UWB radar for indoor and through-wall scenario. The focus of the paper is on the development of the signal processing algorithms for ranging and tracking, taking into account the particular properties of the UWB CMOS transceiver and the radiation characteristics of the antennas. Theoretical analysis for the algorithms and their evaluations by measurements are presented in the paper. The ranging resolution of this UWB radar has achieved 1-2 mm RMS accuracy for a moving target in indoor environment over a short range, and Kalman tracking algorithm functions well for the through-wall detection.

A Study of the Radiation Characteristics of an Origami Enabled MIMO Antenna

2019 ◽  
Author(s):  
Nicholas E. Russo ◽  
Constantinos L. Zekios ◽  
Stavros V. Georgakopoulos
Keyword(s):  
Radiation Characteristics ◽  
Mimo Antenna

scholarly journals Design Study of a Miniaturized Multi-layered Antenna-in-package for 2.4 GHZ Wireless Communication

2018 ◽  
Vol 8 (5) ◽  
pp. 3627
Author(s):  
Jalal Naghar ◽  
Otman Aghzout ◽  
Azzeddin Naghar
Keyword(s):  
Low Cost ◽  
Middle Layer ◽  
Antenna Design ◽  
Radiation Characteristics ◽  
Radiation Properties ◽  
Compact Size ◽  
Parasitic Patch ◽  
Reflexion Coefficient ◽  
Miniaturized Antenna ◽  
Different Shapes

This paper proposes a novel miniaturization technique to enhance the radiation properties of small multi-layer patch antenna used in packaged circuits. The multilayered antenna design is composed of three layers with different shapes. An enhancement on the radiation properties has been obtained by optimizing the geometry of the radiated element and the parasitic conductor of the middle layer. The whole design has been implemented on the FR4 substrate with dielectric constant of 4.4, thickness of 1.6 mm and Copper thickness of 5 μm. The first layer is a driven element while second and the third layer are parasitic patch elements. The optimized multilayer antenna has a very small size of 12×6×5 mm^3. Considering the small size of the antenna, a detailed study of the parameter affecting the radiation has been considered to force the antenna to operate at 2.4 GHz band. Miniaturization techniques based on the current distribution have been also taken into account to shift down the resonant frequency and reduces more and more the antenna size at the designed operating frequency. The miniaturized antenna maintains performant radiation characteristics in terms of reflexion coefficient, bandwidth and directivity. All developed antennas are simulated using the commercial Electromagnetic CST Microwave Studio software. Achieved results demonstrate a good performance with low cost and compact size.

scholarly journals Design and Analysis of MIMO Dual Band Patch Antenna for 5G New Radio Applications in Mobile Terminals

2021 ◽  
Vol 9 (VI) ◽  
pp. 5446-5451
Author(s):  
Swati Dhandade
Keyword(s):  
Mobile Communications ◽  
Antenna Design ◽  
Dual Band ◽  
Slight Variation ◽  
Band Frequency ◽  
Mimo Antenna ◽  
High Isolation ◽  
New Radio ◽  
Compact Size ◽  
5G Mobile Communications

This paper presents a dual-band MIMO antenna design with compact size for 5G communication under 6 GHz band frequency. The metallic monopole stub structure is used to miniaturization of antenna. The L-shape monopole antenna is modified by adding semi-circular element in radiating structure of monopole to obtain dual-band resonance. The High isolation is achieved by employing T-shaped stub in ground plane.It has compact size is 45 mm × 25 mm × 1.6 mm3. The proposed Dual Band MIMO antenna has been design on FR4 material with ɛr = 4.4 with 1.6 thickness. The proposed antenna has 5G application in the bands of 2.5 GHz (2.34 GHz-2.62 GHz) and 3.5 GHz (3.20 GHz-5.20 GHz). The bandwidth of antenna getting 320MHz and 2500MHz at 2.5GHz and 3.5GHz respectively. The Isolation (S21) of proposed antenna is -31.2 dB at 2.5 GHz and -19.5 dB at 3.5 GHz. VSWR is less than 1.06 for both the bands. The designed dual band MIMO antenna covers 5G bands of 2.3-2.4GHz (n30/n40), 2.4-2.5GHz (n7/n38/n41/n90), and 3.2-5.2GHz (n77/n78/n80). The experimental and simulated results observed good matching except some slight variation. This proposed dual band MIMO antenna is suitable for 5G mobile Communications.

scholarly journals Ionospheric Polarization Techniques for Robust NVIS Remote Sensing Platforms

2020 ◽  
Vol 10 (11) ◽  
pp. 3730 ◽  
Author(s):  
Josep M. Maso ◽  
Jordi Male ◽  
Joaquim Porte ◽  
Joan L. Pijoan ◽  
David Badia
Keyword(s):  
Remote Sensing ◽  
Power Transmission ◽  
Low Cost ◽  
Density Ratio ◽  
Satellite Communications ◽  
Selection Combining ◽  
Noise Spectral Density ◽  
Diversity Techniques ◽  
Sensing Platform ◽  
Sensing Platforms

Every year more interest is focused on high frequencies (HF) communications for remote sensing platforms due to their capacity to establish links of more than 250 km without a line of sight and due to them being a low-cost alternative to satellite communications. In this article, we study the ionospheric ordinary and extraordinary waves to improve the applications of near vertical incidence skywave (NVIS) on a single input multiple output (SIMO) configuration. To obtain the results, we established a link of 95 km to test the diversity combining of ordinary and extraordinary waves by using selection combining (SC) and equal-gain combining (EGC) on a remote sensing platform. The testbench is based on digital modulation transmissions with power transmission between 3 and 100 W. The results show us the main energy per bit to noise spectral density ratio (Eb/N0) and the bit error rate (BER) differences between ordinary and extraordinary waves, SC, and EGC. To conclude, diversity techniques show us a decrease of the power transmission need, allowing for the use of compact antennas and increasing battery autonomy. Furthermore, we present three different improvement options for NVIS SIMO remote sensing platforms depending on the requirements of bitrate, power consumption, and efficiency of communication.

Sign in / Sign up

Export Citation Format

Share Document