scholarly journals Development and Verification of Prototypical Office Buildings Models Using the National Building Energy Consumption Survey in Korea

2021 ◽  
Vol 13 (7) ◽  
pp. 3611
Author(s):  
Hye-Jin Kim ◽  
Do-Young Choi ◽  
Donghyun Seo
Keyword(s):  
Energy Consumption ◽  
Energy Policy ◽  
Policy Development ◽  
Large Scale ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Office Buildings ◽  
Policy Enforcement ◽  
Building Stock

In the early 2000s, the Korean government mandated the construction of only zero-energy residential buildings by 2025 and for non-residential buildings from 2030. Two decades since the start of building energy policy enforcement, Korean experts believe that it is time to evaluate its impact. However, few studies have systematically and extensively examined the energy consumption characteristics of the non-residential building stock. In this study, a framework development is implemented for defining non-residential prototypical office buildings based on Korea’s first large-scale non-residential building survey result from the Korea Energy Economics Institute (KEEI). Then, a detailed building energy model of the defined prototypical building is constructed to verify the model’s energy estimation against observed energy consumption. As an application of the model, a case study for energy policy evaluation utilizing the constructed prototypical building model is presented. Every researcher and county may have their own circumstances when gathering definition data. However, by using the best available representative data, this suggested framework may result in informed decisions regarding energy policy development and evaluation. In addition, the mitigation of greenhouse gases from buildings may be expedited.

scholarly journals TOPOI RESOURCES: Quantification and Assessment of Global Warming Potential and Land-Uptake of Residential Buildings in Settlement Types along the Urban–Rural Gradient—Opportunities for Sustainable Development

2021 ◽  
Vol 13 (8) ◽  
pp. 4099
Author(s):  
Ann-Kristin Mühlbach ◽  
Olaf Mumm ◽  
Ryan Zeringue ◽  
Oskars Redbergs ◽  
Elisabeth Endres ◽  
...  
Keyword(s):  
Sustainable Development ◽  
Global Warming ◽  
Energy Consumption ◽  
Global Warming Potential ◽  
Residential Buildings ◽  
Residential Building ◽  
Negative Effects ◽  
Building Stock ◽  
Residential Building Stock ◽  
Urban Rural

The METAPOLIS as the polycentric network of urban–rural settlement is undergoing constant transformation and urbanization processes. In particular, the associated imbalance of the shrinkage and growth of different settlement types in relative geographical proximity causes negative effects, such as urban sprawl and the divergence of urban–rural lifestyles with their related resource, land and energy consumption. Implicitly related to these developments, national and global sustainable development goals for the building sector lead to the question of how a region can be assessed without detailed research and surveys to identify critical areas with high potential for sustainable development. In this study, the TOPOI method is used. It classifies settlement units and their interconnections along the urban–rural gradient, in order to quantify and assess the land-uptake and global warming potential driven by residential developments. Applying standard planning parameters in combination with key data from a comprehensive life cycle assessment of the residential building stock, a detailed understanding of different settlement types and their associated resource and energy consumption is achieved.

scholarly journals Integrating GIS-Based Point of Interest and Community Boundary Datasets for Urban Building Energy Modeling

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1049
Author(s):  
Zhang Deng ◽  
Yixing Chen ◽  
Xiao Pan ◽  
Zhiwen Peng ◽  
Jingjing Yang
Keyword(s):  
Large Scale ◽  
Residential Buildings ◽  
Building Energy ◽  
Energy Performance ◽  
Energy Modeling ◽  
Office Buildings ◽  
Building Energy Modeling ◽  
Downtown Area ◽  
Point Of Interest

Urban building energy modeling (UBEM) is arousing interest in building energy modeling, which requires a large building dataset as an input. Building use is a critical parameter to infer archetype buildings for UBEM. This paper presented a case study to determine building use for city-scale buildings by integrating the Geographic Information System (GIS) based point-of-interest (POI) and community boundary datasets. A total of 68,966 building footprints, 281,767 POI data, and 3367 community boundaries were collected for Changsha, China. The primary building use was determined when a building was inside a community boundary (i.e., hospital or residential boundary) or the building contained POI data with main attributes (i.e., hotel or office building). Clustering analysis was used to divide buildings into sub-types for better energy performance evaluation. The method successfully identified building uses for 47,428 buildings among 68,966 building footprints, including 34,401 residential buildings, 1039 office buildings, 141 shopping malls, and 932 hotels. A validation process was carried out for 7895 buildings in the downtown area, which showed an overall accuracy rate of 86%. A UBEM case study for 243 office buildings in the downtown area was developed with the information identified from the POI and community boundary datasets. The proposed building use determination method can be easily applied to other cities. We will integrate the historical aerial imagery to determine the year of construction for a large scale of buildings in the future.

DWELLING FACTORS EFFECT ON RESIDENTIAL BUILDING ENERGY CONSUMPTION

2015 ◽  
Vol 77 (15) ◽  
Author(s):  
Jibrin Hassan Suleiman ◽  
Saeed Balubaid ◽  
Nasiru Mohammed Zakari ◽  
Egba Ernest Ituma
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Building Energy Consumption ◽  
Refrigeration System ◽  
Rapid Urbanization ◽  
Air Conditioning System ◽  
Household Heads ◽  
Self Administered Questionnaire

Most of the developing countries experience rapid urbanization and population growth, Malaysia is among these countries as the population and the energy consumption in the country tremendously increased over the last few decades.  A major challenge is the rate of energy consumption in the country is tremendous going higher which is a threat as the country was listed 26th out of the 30 top greenhouse emitters in the world.  A survey was conducted on the ways occupants’ consumes energy in their residential buildings in relation to dwelling factors in the State of Johor Malaysia. Energy consumption of the residential owners was assessed using drop and pick self-administered questionnaire. The questionnaires were answered by each household heads. Air conditioning system, refrigeration system, kitchen appliances, bathroom and laundry appliances, lighting appliances as well as other home appliances was considered in the survey. Correlation analysis was used using Statistical Package for Social Sciences (SPSS) to analyze the results. The finding shows a positive relationship between dwelling factors.  r ≥ 0.3 and above between dwelling factors and residential building energy consumption. 

Research on Energy Optimization and the Effect Factors of Energy Consumption about Residential Buildings in Inner Mongolia

2013 ◽  
Vol 368-370 ◽  
pp. 1322-1326
Author(s):  
Guo Hui Jin ◽  
Huai Zhu Wang
Keyword(s):  
Energy Consumption ◽  
Inner Mongolia ◽  
Residential Buildings ◽  
Rapid Development ◽  
Influence Factors ◽  
Residential Building ◽  
Building Energy ◽  
Effect Factors ◽  
Building Energy Conservation ◽  
Building Energy Saving

With the rapid development of national economy in china, the proportion of the building consumption in energy consumption is rising year by year. This paper will analyze energy influence factors of consumption of residential building in Inner Mongolia. According to these factors, it will optimize the energy consumption of residential building energy saving research . In the end , the thesis will put up some measures to optimization of conserve energy and provide guidance and help for residential building energy conservation in Inner Mongolia.

Energy Consumption Simulation for Residential Buildings With Shading Devices in Different Regions

2007 ◽  
Author(s):  
Junjie Liu ◽  
Xiaojie Zhou ◽  
Zhihong Gao
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Energy Performance ◽  
Indoor Environments ◽  
Total Energy Consumption ◽  
South West ◽  
Shading Devices ◽  
Energy Consumption Simulation

With the development of energy saving, it is needed to calculate the energy consumption of the residential building, particularly accurate dynamic energy consumption. Fixed shading devices are wildly used to save building energy because they prevent undesirable heat coming through the windows during the “overheated period”, just as in summer, which can ameliorate the indoor environments and reduce the energy consumption of air-conditioning in summer. But they will also prevent solar energy which can be used in winter to enter windows. So it is very important to be able to determine the optimal shading devices of windows. The overhangs and vertical-shading devices are representative to study the different energy performance in summer and winter, in an actual dwell house. On the other hand, fixed shading devices can weaken the effect of daylighting, so we would take both the total energy consumption and rooms’ daylighting into account. In this study, we choose several typical dwelling houses in different cities located in north, south, west, east and central region of China respectively. We calculated energy consumption of those models by using Energyplus program, and compared the shading performance of horizontal and vertical shading devices, then optimal configuration dimensions of horizontal shading devices are recommended on the basis of different requirements for solar heat gains in winter and in summer for those typical dwelling houses.

scholarly journals Exploring the Energy Implication of Urban Density in Residential Buildings

2017 ◽  
Vol 7 (1) ◽  
pp. 7-14 ◽  
Author(s):  
Soufiane Boukarta ◽  
Ewa Berezowska
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Pearson Correlation ◽  
Residential Building ◽  
Holistic Approach ◽  
Building Stock ◽  
Urban Density ◽  
Spatial Approach ◽  
Residential Building Stock ◽  
Gas Consumption

AbstractIn the context of the Algerian energy policy, and through the review of the Algiers’ residential building stock, this paper explores the correlation between the energy consumption of gas and electricity with urban density. Based on a holistic approach of the 57 Algiers’ municipalities, the analysis is organized in two ways. Firstly, the spatial approach is conducted within a GIS implementation, carried out based on the 2013 aggregated annual energy consumption data. The cross analysis of Electricity and Gas consumption and density of population within a GIS spatial distribution approach shows effectively a strong correlation between urban density and energy consumption with a Pearson correlation of −56% and −65% of the Electricity and Gas consumption in the urban municipalities, respectively. Also, the household located in the suburban municipalities consume clearly more energy than the urban centered ones. Based on the electricity and gas consumption, density and carbon footprint we have clustered, within a PCA, the Algiers’ municipalities into three profiles: the “thrifty”, the “intermediate” and the “wasteful” profile.

scholarly journals Selection of Favourable Concept of Energy Retrofitting Solution for Social Housing in the Czech Republic Based on Economic Parameters, Greenhouse Gases, and Primary Energy Consumption

2019 ◽  
Vol 11 (22) ◽  
pp. 6482
Author(s):  
Katerina Sojkova ◽  
Martin Volf ◽  
Antonin Lupisek ◽  
Roman Bolliger ◽  
Tomas Vachal
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Residential Buildings ◽  
Residential Building ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Building Stock ◽  
Gas Emissions ◽  
Residential Building Stock

Energy retrofitting of existing building stock has significant potential for the reduction of energy consumption and greenhouse gas emissions. Roughly half of the CO2 emissions from Czech building stock are estimated to be allocated to residential buildings. Approximately one-third of the Czech residential building stock have already been retrofitted, but retrofitting mostly takes place in large cities due to greater income. A favourable concept for the mass retrofitting of residential building stock, affordable even in low-income regions, was of interest. For a reference building, multi-criteria assessment of numerous retrofitting measures was performed. The calculation involved different building elements, materials, solutions, and energy-efficiency levels in combination with various heating systems. The assessment comprised environmental impact, represented by operational and embodied primary energy consumption and greenhouse gas emissions, and investment and operational costs using the annuity method. Analysis resulted in the identification of favourable retrofitting measures and showed that complex building retrofitting is advantageous from both a cost and an environmental point of view. The environmental burden could be decreased by approximately 10–30% even without photovoltaic installation, and costs per year could be decreased by around 40%.

scholarly journals Analysis of the Effects of Strengthening Building Energy Policy on Multifamily Residential Buildings in South Korea

2020 ◽  
Vol 12 (9) ◽  
pp. 3566
Author(s):  
Byung Chang Kwag ◽  
Sanghee Han ◽  
Gil Tae Kim ◽  
Beobjeon Kim ◽  
Jong Yeob Kim
Keyword(s):  
Energy Consumption ◽  
South Korea ◽  
Energy Policy ◽  
Energy Demand ◽  
Residential Buildings ◽  
Building Energy ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Primary Energy Consumption

The purposes of this study were to overview the building-energy policy and regulations in South Korea to achieve energy-efficient multifamily residential buildings and analyze the effects of strengthening the building design requirements on their energy performances. The building energy demand intensity showed a linear relationship with the area-weighted average U-values of the building envelope. However, improving the thermal properties of the building envelope was limited to reducing the building-energy demand intensity. In this study, the effects of various energy conservation measures (ECMs) on the building-energy performance were compared. Among the various ECMs, improving the boiler efficiency was found to be the most efficient measure for reducing the building-energy consumption in comparison to other ECMs, whereas the building envelope showed the least impact, because the current U-values are low. However, in terms of the primary energy consumption, the most efficient ECM was the lighting power density because of the different energy sources used by various ECMs and the different conversion factors used to calculate the primary energy consumption based on the source type. This study showed a direction for updating the building-energy policy and regulations, as well as the potential of implementing ECMs, to improve the energy performances of Korean multifamily residential buildings.

Analysis on the Effect of Shape Coefficient to Energy Saving in Residential Buildings

2012 ◽  
Vol 450-451 ◽  
pp. 1425-1428
Author(s):  
Xiao Ping Feng ◽  
Hui Lin ◽  
Yue Wang ◽  
Hu Cheng
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Shape Coefficient ◽  
Building Shape ◽  
Building Plane ◽  
The Impact ◽  
The Relationship

Building shape coefficient is an important factor in building energy saving design. In order to analyze the influence of shape coefficient to the energy consumption, a typical residential building is simulated by BECS software to analyze the changing regular patterns of the energy consumption for heating and air conditioning while the building shape coefficient is made different. The relationship between building height and shape coefficient, and the impact of the building plane layout on the energy consumption are also analyzed. The results show that the reduction of shape coefficient is benefit to enhance the effect of energy saving.

PRIORITIZING OCCUPANTS UNDERSTANDING LEVEL ON RESIDENTIAL BUILDING ENERGY CONSUMPTION

2015 ◽  
Vol 77 (16) ◽  
Author(s):  
Jibrin Hassan Suleiman ◽  
Ali Keyvanfar ◽  
Rosli Mohamad Zin ◽  
Saeed Balubaid ◽  
Shaiful Amri Mansur
Keyword(s):  
Energy Consumption ◽  
Total Energy ◽  
Energy Use ◽  
Negative Impact ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Living Standard ◽  
Survey Form ◽  
Home Appliance

The building sector is widely known for its greenhouse gas and carbon emission which is very significant to the global warming as observed in recent years. Many research works highlighted that buildings has a negative impact on the society as it consumes up to 80% of the total energy used during operation stage. In Malaysia, electricity energy consumption in buildings is 63,354GWh out of the total 116,353GWh of total energy consumed in the country in the year 2012. This paper consider the understanding level of the residential owners in their building energy usage at their various residential buildings. Energy use by household varies widely, this is due to the living standard of a country, type of buildings and climate condition of the region. The study is based on the tips and guides to energy efficiency at home of the Sustainable Energy Development Authority (SEDA) Malaysia. Data was collected through a questionnaire survey form and was analyzed using regression analysis, the results indicates that the occupants have little or no proper understanding of Air-condition, Home appliance and Lighting appliances.

Sign in / Sign up

Export Citation Format

Share Document