DEFORMATION OF HORIZONTAL JOINTS’ MORTAR OF MASONRY UNDER COMPRESSION
The necessity of establishing and determining the consistency of mortars deformation in the horizontal joints of masonry is established: in the absence and development of cracks and with the exhaustion of resistance ranging from 80 – 85 % of the total deformation of masonry under short-term compression. Attention is paid to the absence of reports in the scientific literature on the conduct and results of research on the spatial stress-deformative state of the mortar in the joints of masonry under compression. The advantages of studying the secant modulus of deformation Ep are emphasized in solving various issues in the theory of operation and method for calculating the masonry. On the basis of long-term research results, the essential difference between the change in the secant modulus of cement mortars deformation E'p of varying strength of horizontal joints from the nature of its change when tested in standard samples is shown analytically and graphically. The advantages of the developed methodology for processing the results of investigations of mortars in standard samples are noted. It allows to more accurately set the actual values of normal strain modulus E0 and the ultimate relative deformation under compression. The analytical dependences of the plasticity coefficient and the secant modulus of deformations E'p are found based on processing the results of numerous studies of masonry mortars