scholarly journals Use of Lemongrass Leaf Ethanol Extract for Developing Alginate Based Antibacterial Edible Films

2020 ◽  
Vol 10 (2) ◽  
pp. 99-107
Keyword(s):  
Antibacterial Activity ◽  
Moisture Content ◽  
Food Packaging ◽  
Antimicrobial Agents ◽  
Water Solubility ◽  
Brown Seaweed ◽  
Ethanol Extract ◽  
Edible Films ◽  
Edible Film ◽  
Alcohol Extract

Alginates extracted from brown seaweed have a variety of prospective applications such as thickeners, stabilizers, or restructuring agents. Due to its properties as a natural polysaccharide, alginate is very potential to be used as edible films for food packaging purposes. Edible films are developed for food protection being excellent barriers to gases but not to moisture. Incorporation of antimicrobial agents into edible film formulation can extend product shelf life and reduce the risk of pathogenic bacterial growth on food. Therefore, this study was aimed to develop an alginate based antibacterial edible film. Antibacterial agent extracted from lemongrass leaves using ethanol was employed. The study was conducted by varying the addition levels of lemongrass ethanol extract to the alginate based edible films, i.e. 0.5%, 1.0% and 1.5%. Before being added to the alginate based edible films, the lemongrass ethanol extract was investigated for its antibacterial activity. The edible films obtained were analyzed in terms of physical, mechanical and chemical and microbiological parameters, including thickness, water vapor transmission rate (WVTR), brightness, tensile strength, elongation, moisture content, water solubility and antibacterial activity. Results showed that the higher addition levels of lemongrass ethanol extract tended to produce alginate based edible films with lower WVTR and brightness value as well as higher elongation, moisture content and water solubility. Edible film added with lemongrass ethanol extract resulted in this study demonstrated antibacterial activity against Staphylococcus aureus. The addition of lemongrass alcohol extract at 0.5% was considered as a recommended concentration level for producing alginate based antibacterial edible films.

scholarly journals Physical Properties of Edible Films from Pangasius catfish Bone Gelatin-Breadfruits Strach with Different Formulations

2020 ◽  
Vol 3 (2) ◽  
pp. 42-47
Author(s):  
Rian Adhi Santoso ◽  
Yoni Atma
Keyword(s):  
Tensile Strength ◽  
Water Vapor ◽  
Moisture Content ◽  
Physical Properties ◽  
Food Packaging ◽  
Edible Films ◽  
Fish Bone ◽  
Edible Film ◽  
Japanese Industrial Standard ◽  
Water Vapor Transmission

Abstract— This research aims to provide edible film made from fish bone gelatin of Pangasius catfish mixed breadfruit starch with different formulations. The study was carried out through three stages including breadfruit starch isolation, edible films fabrication and analysis of physical properties of resulted edible film such as thickness, water vapor transmission, tensile strength and percent of elongation as well as moisture content. Edible films which were formulated from fish bone gelatin of Pangasius catfish by breadfruit starch addition have thickness values ranged of ​​0.084-0.123 mm, 6.08 - 16.77% of moisture content, water vapor transmission of 1.07 - 1.60 g/ m²/hour, tensile strength of 0.245 - 1.186 MPa, and percent of elongation around 70 - 87.14%. The edible films from gelatin of Pangasius catfish bone with breadfruit starch addition have physical characteristic which fulfill the standard requirements issued by Japanese Industrial Standard (JIS) Keywords— edible film; biodegradable materials; fish gelatin;breadfruit starch; food packaging    

scholarly journals PROPERTIES OF EDIBLE FILM FROM MODIFIED SAGO STARCH PRECIPITATED BY BUTANOL

2020 ◽  
Vol 21 (4) ◽  
pp. 164
Author(s):  
Riska Surya Ningrum ◽  
Dewi Sondari ◽  
Putri Amanda ◽  
Bernadeta Ayu Widyaningrum ◽  
Dian Burhani ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Contact Angle ◽  
Tensile Strength ◽  
Food Packaging ◽  
Water Solubility ◽  
Petri Dish ◽  
Edible Films ◽  
Edible Film ◽  
Sago Starch ◽  
Transparent Film

ROPERTIES OF EDIBLE FILM FROM MODIFIED SAGO STARCH PRECIPITATED BY BUTANOL. The edible film is a thin layer that can be used as food packaging and safe for consumption. Starch is a material that can be used as an edible film because it is biodegradable, non-toxic, able to form a strong and transparent film. In this research, sago starch has been precipitated using butanol for 1, 2, 3, 4, and 5 hours. Precipitated sago is reacted with 3% glycerol and then formed into a film by printing it on a petri dish. Characterizations of edible films are FTIR, contact angle, water solubility, swelling power, WVTR, and mechanical properties (thickness, tensile strength, and elongation). Edible film (B2) has the best mechanical properties, that is high hydrophobicity (contact angle is 60,351 degree), tensile strength (6,8843 N/mm2), and elongation (49,5081 %), also low water solubility (0,3352 %), moisture content (18,6005 %), and WVTR (0,02986 g s-1 m-2).

scholarly journals Edible Films Based on Black Chia (Salvia hispanica L.) Seed Mucilage Containing Rhus microphylla Fruit Phenolic Extract

Coatings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 326
Author(s):  
Ana V. Charles-Rodríguez ◽  
Luz L. Rivera-Solís ◽  
Joana T. Martins ◽  
Zlatina Genisheva ◽  
Armando Robledo-Olivo ◽  
...  
Keyword(s):  
Moisture Content ◽  
Water Solubility ◽  
Edible Films ◽  
Salvia Hispanica ◽  
Alcohol Extract ◽  
Phenolic Extract ◽  
Quality Of Food ◽  
Salvia Hispanica L ◽  
Seed Mucilage

Functional films based on black chia (Salvia hispanica L.) seed mucilage (BCm) containing Rhus microphylla (Rm) fruit phenolic extract were built and characterized. A hydro-alcohol extract (HAE) of Rm was incorporated as the bioactive agent due to its noteworthy phenolic profile, and good antioxidant and antifungal activities. The effects of the BCm concentration (0.2% and 0.4%, w/v), HAE incorporation, and their interaction with glycerol (1.0%, w/v) and calcium chloride (0.05%, w/v) on the films’ physicochemical properties were evaluated. The filmogenic solutions successfully fitted to the Herschel–Bulkley model (R2 < 0.999), exhibiting a pseudoplastic and shear thinning character, typical of polymer solutions. Interestingly, their rheological properties were not (p > 0.05) changed by the HAE addition, but their surface tension was enhanced (p < 0.05), which could favor their coating ability. The polyanionic nature of the systems (zeta potential-Zp values from −26.9 to −33.3 mV) allowed them to interact with Ca2+ cations, thus forming stable and resistant films. All the films showed low water solubility (15.0% to 22.3%) and high permeability (3.7 to 4.0 × 10−10 g m−1 s−1 Pa−1), as well as high biodegradability (moisture content from 66.0% to 80.9%); although the moisture content was reduced (p < 0.05) with HAE addition. The combination of higher BCm ratio and HAE addition (BCm0.4+Rm) led to a more resistant, thick, opaque, and dark film compared with the others obtained. This study reveals the BCm-based films’ potential, highlighting those with HAE, representing a novel alternative to improve the quality of food products.

PEMANFAATAN LIMBAH KULIT DURIAN (Durio zibethinus) DAN KULIT CEMPEDAK (Artocarpus integer) SEBAGAI EDIBLE FILM

2014 ◽  
Vol 6 (1) ◽  
pp. 27 ◽  
Author(s):  
Desi Mustika Amaliyah
Keyword(s):  
Tensile Strength ◽  
Food Packaging ◽  
Raw Materials ◽  
Edible Films ◽  
Edible Film ◽  
Durio Zibethinus ◽  
Yield Result ◽  
Pre Treatment

Durian (Durio zibethinus) and cempedak (Artocarpus integer) peels waste are not used by the society. The research aim is to extract pectin from durian and cempedak peels and to formulate the pectin into edible films for food packaging. The research stages were first pre-treatment of durian and cempedak peels, pectin extraction, pectin drying, and  pectin application as edible films with concentration of 0%, 5%, and 15%. Based on this research it was concluded that pectin can be extracted from durian and cempedak peels with yield result of 27.97 % and 55.58 %, respectively. Edible film obtained has  similar characteristics between raw materials cempedak and durian peels. The higher concentration of cempedak peel  pectin increased the thickness, but decreased the tensile strength and elongation at a concentration of 15%. While in edible films from durian peel pectin, the higher concentration of pectin decreased the thickness of edible film on pectin concentration of 15%, lowered tensile strength and raised the edible film elongation.Keywords: waste, durian, cempedak, pectin extraction, edible film

scholarly journals Synthesis, Characterization and Bactericidal Activity of a 4-Ammoniumbuthylstyrene-Based Random Copolymer

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1140
Author(s):  
Silvana Alfei ◽  
Gabriella Piatti ◽  
Debora Caviglia ◽  
Anna Maria Schito
Keyword(s):  
Antibacterial Activity ◽  
Bactericidal Activity ◽  
Antimicrobial Agents ◽  
Water Solubility ◽  
Physicochemical Characterization ◽  
Random Copolymer ◽  
Water Soluble ◽  
Cationic Polymers ◽  
Severe Infections

The growing resistance of bacteria to current chemotherapy is a global concern that urgently requires new and effective antimicrobial agents, aimed at curing untreatable infection, reducing unacceptable healthcare costs and human mortality. Cationic polymers, that mimic antimicrobial cationic peptides, represent promising broad-spectrum agents, being less susceptible to develop resistance than low molecular weight antibiotics. We, thus, designed, and herein report, the synthesis and physicochemical characterization of a water-soluble cationic copolymer (P5), obtained by copolymerizing the laboratory-made monomer 4-ammoniumbuthylstyrene hydrochloride with di-methyl-acrylamide as uncharged diluent. The antibacterial activity of P5 was assessed against several multi-drug-resistant clinical isolates of both Gram-positive and Gram-negative species. Except for strains characterized by modifications of the membrane charge, most of the tested isolates were sensible to the new molecule. P5 showed remarkable antibacterial activity against several isolates of genera Enterococcus, Staphylococcus, Pseudomonas, Klebsiella, and against Escherichia coli, Acinetobacter baumannii and Stenotrophomonas maltophilia, displaying a minimum MIC value of 3.15 µM. In time-killing and turbidimetric studies, P5 displayed a rapid non-lytic bactericidal activity. Due to its water-solubility and wide bactericidal spectrum, P5 could represent a promising novel agent capable of overcoming severe infections sustained by bacteria resistant the presently available antibiotics.

UJI AKTIVITAS ANTIBAKTERI EKSTRAK ETANOL DAUN MEKAI (Pycnarrhena cauliflora DIELS.) TERHADAP Staphylococcus aureus

2020 ◽  
Vol 6 (2) ◽  
pp. 246
Author(s):  
Yayuk Bulam Sarifati ◽  
Sjarif Ismail ◽  
Khemasili Kosala
Keyword(s):  
Staphylococcus Aureus ◽  
Antibacterial Activity ◽  
Antimicrobial Agents ◽  
Statistical Tests ◽  
Ethanol Extract ◽  
Inhibition Zone ◽  
Positive Control ◽  
Negative Control ◽  
Control Measurement ◽  
Eye Pain

Mekai leaves (Pycnarrhena cauliflora Diels.) (P. cauliflora). Are known to contain flavonoid compounds, tannins and phenolics that act as antibacterial agents and are used in the treatment of eye pain. Staphylococcus aureus (S. aureus) is one of the examples of bacterial diseases of eye pain and also a major cause of many infections in communities and health facilities with cases of resistance to various antimicrobial agents. The purpose of this study was to prove the antibacterial activity of mekai leaves ethanol extract against S. aureus bacteria. This research is an experimental research. The stages of this research began by extracting mekai leaves using maceration method with 96% ethanol solvent. Antibacterial activity was tested by the disc method (Kirby-Bauer) using ethanol extract concentrations of mekai leaves (EPC) 20%, 30%, 40%, 50%, 60%, 70%, and 80%, positive control using 25 μg amoxicillin and negative control using DMSO 10%. The measurement results of inhibition zones of mekai leaf ethanol extract 20%, 30%, 40%, 50%, 60%, 70% and 80% respectively were 8.32 mm, 8.32 mm, 8.32 mm, 8.67 mm, 9.00 mm, 8.67 mm, and 8.33 mm. While the positive control measurement of 25 μg amoxicillin against S. aureus is 28.67 mm and the measurement of 10% negative DMSO control does not produce inhibitory zones, so it can be concluded that the ethanol extract of mekai leaves has antibacterial activity, but the area of ​​inhibition zone produced is smaller than amoxicillin 25 µg. The results of statistical tests using Mann Whitney between negative controls with all EPC concentrations obtained significant differences with p values ​​<0.05, it can be concluded that there is antibacterial activity produced at all EPC concentrations.

scholarly journals Active Edible Films Based on Arrowroot Starch with Microparticles of Blackberry Pulp Obtained by Freeze-Drying for Food Packaging

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1382 ◽  
Author(s):  
Gislaine Ferreira Nogueira ◽  
Farayde Matta Fakhouri ◽  
José Ignacio Velasco ◽  
Rafael Augustus de Oliveira
Keyword(s):  
Antioxidant Capacity ◽  
Food Packaging ◽  
Freeze Drying ◽  
Water Solubility ◽  
Research Work ◽  
Edible Films ◽  
Sem Images ◽  
Film Forming ◽  
Starch Films ◽  
Arrowroot Starch

This research work evaluated the influence of the type of incorporation and variation in the concentration of blackberry pulp (BL) and microencapsulated blackberry pulp (ML) powders by freeze-drying on the chemical and physical properties of arrowroot starch films. Blackberry powders were added to the film-forming suspension in different concentrations, 0%, 20%, 30% and 40% (mass/mass of dry starch) and through two different techniques, directly (D) and by sprinkling (S). Scanning electron microscopy (SEM) images revealed that the incorporation of blackberry powder has rendered the surface of the film rough and irregular. Films incorporated with BL and ML powders showed an increase in thickness and water solubility and a decrease in tensile strength in comparison with the film containing 0% powder. The incorporation of blackberry BL and ML powders into films transferred colour, anthocyanins and antioxidant capacity to the resulting films. Films added with blackberry powder by sprinkling were more soluble in water and presented higher antioxidant capacity than films incorporated directly, suggesting great potential as a vehicle for releasing bioactive compounds into food.

scholarly journals SCREENING OF PHYTOCHEMICAL, ANTIOXIDANT ACTIVITY AND ANTI-BACTERIAL ACTIVITY OF MARINE SEAWEEDS

2019 ◽  
Vol 11 (1) ◽  
pp. 61
Author(s):  
Rajasekar T. ◽  
Mary Shamya A. ◽  
Jerrine Joseph
Keyword(s):  
Total Protein ◽  
Antimicrobial Agents ◽  
Antioxidant Activities ◽  
Standard Procedure ◽  
Brown Seaweed ◽  
Ethanol Extract ◽  
Total Phenol ◽  
Total Carbohydrate ◽  
Methanol Extracts ◽  
Phytochemical Constituents

Objective: Phytochemical is naturally present in the seaweeds which biologically play a significant role. The intention of this study was designed to screen the phytochemical constituents and antimicrobial potential of selected seaweed collected from Rameshwaram and Tuticorin Southern coast of India.Methods: The present study investigated the presence of phytochemical constituents and also total phenol, total carbohydrate and total protein quantity of the brown seaweed. Dictyopteris delicatula, Padina gymnospora, Acanthophora spicifera, Portieria hornemannii and Ulva faciata were extracted with solvents having different polarities like methanol, ethanol, chloroform and water and screened for the phytochemical constituents, total phenol, total carbohydrate, total protein and DPPH with standard procedure. The antibacterial activities of the seaweeds were examined by agar well diffusion method.Results: Among the five seaweeds, U. faciata showed the maximum number of active constituents in the methanol extract likewise P. gymnospora was found to have a number of diligent compounds in ethanol extract. A. spicifera showed minimum compounds in ethanol as well as chloroform extract. Moreover A. spicifera, P. hornemannii have shown the superior quantity of protein and carbohydrate when compared to other species. The scavenging activity of methanol extracts at 5 mg/ml concentration P. hornemannii shows 18.2% and A. spicifera possess 17.1%. In the antibacterial activity, methanol extracts of all the seaweed showed a potential inhibitory activity against B. cereus and P. aeruginosa compared to other pathogens.Conclusion: The crude extract of seaweed manifest preferable antimicrobial and antioxidant activities, hence in the future, it would be good if it is further taken for treatment of human diseases or as new antimicrobial agents to replace synthetic antimicrobial agents.

Improvement in Food Packaging Industry with Biobased Nanocomposites

2007 ◽  
Vol 3 (4) ◽  
Author(s):  
Zahra Akbari ◽  
Talat Ghomashchi ◽  
Shahin Moghadam
Keyword(s):  
Mechanical Properties ◽  
Food Packaging ◽  
Gas Permeability ◽  
Edible Films ◽  
Edible Film ◽  
Comprehensive Review ◽  
General Review ◽  
Flexible Packaging ◽  
Packaging Industry ◽  
New Challenges

Nanotechnology will become one of the most powerful forces for innovation in the food packaging industry. One such innovation is biobased nanocomposite technology, which holds the key to future advances in flexible packaging. Biobased nanocomposites are produced from incorporation of nanoclay into biopolymers (or Edible films). Advantages of biobased nanocomposites are numerous and possibilities for application in the packaging industry are endless. A comprehensive review of biobased nanocomposite applications in food packaging industry should be necessary because nanotechnology is changing rapidly and the food packaging industry is facing new challenges. This provides a general review of previous works. Many of the works reported in the literature are focused on the production and the mechanical properties of the biobased nanocomposites. Little attention has been paid to gas permeability of biobased nanocomposites. In regard to extensive research on Edible film, this article suggests investigating the replacement of biobased nanocomposites instead of Edible films in different areas of food packaging.

scholarly journals Na-Alginate Utilization of Brown Algae (Sargassum sp.) as A Halal Edible Film Basic Materials

2019 ◽  
Vol 1 (1) ◽  
pp. 9-13
Author(s):  
Nisa Nur Khasanah ◽  
Vina Amalia ◽  
Baiq Vera El Viera ◽  
Asti Sawitri
Keyword(s):  
Tensile Strength ◽  
Moisture Content ◽  
Brown Algae ◽  
Research Method ◽  
Edible Films ◽  
Ash Content ◽  
Edible Film ◽  
Isolation And Characterization ◽  
Two Stages

Edible films made of Na-alginate from brown algae have great potential to be developed as brown algae have a fairly high abundance in Indonesia but have not been widely used. Therefore, in this study conducted by making edible films made from Na-alginate modified by the addition of hydrocolloids carrageenan and glycerol plasticizier. The addition of carrageenan biopolymers is the property of the produced Edible film. The use of glycerol as a plasticizer aims to improve the properties of elasticity Edible films. This research method consists of two stages. First, the isolation and characterization of Na-alginate. Both the preparation and characterization of making edible films. Na-alginate characterization results in yield of 25.68%, 10.84% moisture content, ash content of 23.79%. The carrageenan on the formula Edible films affect the characterization of the resulting films. The value of water absorption from 333.13% to 335.45% and the elongation of 26.26% to 33.34%, and the declining value of tensile strength of 8.93 MPa to 4.17 MPa and young's modulus values of 0.34 MPa to 0.22 MPa with the addition of carrageenan on an Edible film formula.

Sign in / Sign up

Export Citation Format

Share Document