Pharmaceutical Development and Clinical Pharmacokinetic Evaluation of Gastroretentive Floating Matrix Tablets of Levofloxacin

2011 ◽  
Vol 4 (3) ◽  
pp. 1463-1470
Author(s):  
Y. Madhusudan Rao ◽  
N Doodipala ◽  
C R Palem ◽  
S Reddy
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Alkaline Media ◽  
In Vitro Dissolution ◽  
Sustained Drug Release ◽  
Compression Technique ◽  
Weight Variation ◽  
Floating Drug Delivery System

The most common approach for achieving sustained drug release is by the use of hydrophilic polymeric excipients directly compressed with active ingredients into tablets. Hydrophilic polymers swell in the presence of water to form hydrogel structures from which drugs are released by slow diffusion. The purpose of this study was to prepare a floating drug delivery system of levofloxacin, a fluoroquinolone antibiotic.  Levofloxacin is highly soluble in acidic media and precipitates in alkaline media, thereby losing its solubility. We designed a gastroretentive system of levofloxacin to enhance bioavailability by retaining them in the acidic environment of the stomach. Tablets were prepared by the direct compression technique using polymers such as hydroxypropyl- methylcellulose (HPMC K4M, HPMC K15M, and HPMC K100M). Sodium bicarbonate was utilized as a gas-generating agent. Tables were evaluated for their physical characteristics such as hardness, thickness, friability, weight variation, drug content, swelling studies, and floating properties. Tablet formulations were evaluated by in vitro dissolution studies. Formulations showed a floating lag time of 30 seconds and a floating time above 12 hours. Among these formulations F3, F7 and F11 exhibited controlled and prolonged drug release profiles while floating over the dissolution medium. The best formulation (F3) was selected based on in vitro characteristics and further tested in healthy volunteers by radiographic studies of tablets by incorporating BaSO4. These clinical studies revealed that the tablets remained in the stomach for 240 ± 30 minutes in fasting human volunteers, indicating gastric retention of the system.

scholarly journals In Vitro Evaluation of Sustained Released Matrix Tablet Formulations of Clarithromvcin

2005 ◽  
Vol 73 (1) ◽  
pp. 59-74
Author(s):  
Lütfi Genç ◽  
A. Kıran
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Assay Method ◽  
Content Uniformity ◽  
Matrix Tablet ◽  
Compression Technique ◽  
23 Factorial Design

Sustained release matrix tablets of clarithromycin were prepared using different polymers as Hydroxypropyl methylcellulose (H PMC), Carbopol 934 and Eudragit RL/PO by direct compression technique. For the quality control of these formulations, weight deviation, hardness, friability, diameter-height ratio, content uniformity of the active substance and in vitro dissolution technique were performed. HPLC was used for the assay of clarithromycin and the assay method was validated. Dissolution profiles of the tablets were plotted and evaluated kinetically. The effects on drug release of polymer type and concentrations were investigated by 23 factorial design. The tablets containing HPMC, Carbopol 934 and Eudragit RLIPO were found suitably to sustain drug release

Formulation and Evaluation of Galantamine Hydrobromide Floating Matrix Tablet

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Poreddy Srikanth Reddy ◽  
Penjuri Subhash Chandra Bose ◽  
Vuppula Sruthi ◽  
Damineni Saritha
Keyword(s):  
Sodium Alginate ◽  
Xanthan Gum ◽  
Lag Time ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Matrix Tablet ◽  
Compression Technique ◽  
Weight Variation ◽  
The Matrix

The aim of the present work was to prepare floating tablets of galantamine HBr using sodium alginate and xanthan gum as matrix forming carriers. Galantamine HBr is used for the treatment of mild to moderate Alzheimer's disease and various other memory impairments, in particular those of vascular origin. The matrix tablet formulations were prepared by varying the concentrations of sodium alginate and xanthan gum. The tablets were prepared by direct compression technique using PVP K-30 as a binder and sodium bicarbonate for development of CO2. The prepared matrix tablets were evaluated for properties such as hardness, thickness, friability, weight variation, floating lag time, compatibility using DSC and FTIR. In vitro dissolution was carried out for 12 hrs in 0.1N HCl at 37±0.5 ºC using USP paddle type dissolution apparatus. It was noted that, all the prepared formulations had desired floating lag time and constantly floated on dissolution medium by maintaining the matrix integrity. The drug release from prepared tablets was found to vary with varying concentration of the polymers, sodium alginate and xanthan gum. From the study it was concluded that floating drug delivery system for galantamine HBr can be prepared by using sodium alginate and xanthan gum as a carrier.

scholarly journals Design, Development and Evaluation of Instant Release Oral Thin Films of Flunarizine

2021 ◽  
Vol 71 (1) ◽  
Author(s):  
Asfiya Fatima ◽  
Mamatha Tirunagari ◽  
Divya Theja Chilekampalli
Keyword(s):  
Thin Films ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Rapid Onset ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Onset Of Action ◽  
Weight Variation ◽  
Accelerated Stability

The main objective of the present study was to prepare and evaluate the instant release oral thin films of Flunarizine, in order to enhance the bioavailability of the drug and to provide rapid onset of action thereby improving patient compliance. The instant release oral thin films of Flunarizine were prepared by solvent casting method using film forming polymer like Hydroxypropyl Methylcellulose E-15. The film was evaluated for various physicochemical parameters that include thickness, weight variation, folding endurance, tensile strength, drug content and in vitro drug release studies. No differences were observed in in vitro dissolution of drug from the formulated film F1-F9 as the film instantly gets wet by dissolution medium. The drug release for F5 formulations was about 98.1%. The accelerated stability studies for the optimized film formulations F5 were performed that indicates that the formulated instant release oral thin films were unaffected after initial and 3 months storage under accelerated conditions.

scholarly journals FORMULATION AND EVALUATION OF FLOATING MATRIX TABLETS OF LEVOFLOXACIN HEMIHYDRATE USING HYDROXYPROPYL METHYLCELLULOSE K4M TO TREAT HELICOBACTER PYLORI INFECTION

2018 ◽  
Vol 11 (6) ◽  
pp. 148
Author(s):  
Srinivasa Rao Baratam ◽  
Vijayaratna J
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Linear Regression Method ◽  
In Vitro Drug Release ◽  
Sustained Drug Delivery

Objective: The aim of the study was to develop a floating drug delivery system of levofloxacin (LVF) hemihydrate for sustained drug delivery to improve the extended retention in the stomach, oral bioavailability, and local site-specific action in the stomach. Methods: Preparation of LVF tablets using melt granulation method using hydroxypropyl methylcellulose (HPMC) K4M with sodium bicarbonate as gas generating agent. From LFTA1 to LFTA5, formulations were developed and evaluated for floating properties for swelling characteristics and in vitro drug release studies. In vitro dissolution was carried out using USP II paddle method using 0.1N HCI pH buffer at 50 rpm and samples were measured at 294 nm using ultraviolet-visible spectroscopy. Results: Obtained Fourier-transform infrared charts indicated that there is no positive evidence for the interaction between LVF and ingredients of the optimized formula. In vitro drug release was performed and drug release kinetics were evaluated using the linear regression method and were found to be followed the zero-order release by diffusion controlled release. Optimized formula was found to be LFTA4 with 20% of a polymer with 99.03% of drug release with 12 h of floating time and 32 s floating lag time. Conclusion: Matrix tablets (LFTA4) formulated employing 20% HPMC K4M are best suited to be used for gastroretentive dosage form of LVF.

scholarly journals DESIGN AND IN VITRO CHARACTERIZATION OF FLOATING TABLETS OF METRONIDAZOLE

2019 ◽  
pp. 539-544
Author(s):  
CHINNA ESWARAIAH M ◽  
JAYA S
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Content Uniformity ◽  
Matrix Tablet ◽  
N Value

Objective: The objective of the present study was to formulate the effervescent floating matrix tablet of metronidazole and to evaluate the effect of varying concentrations of hydrophilic polymers on drug release. Methods: Drug excipients interaction was studied by Fourier transform infrared spectrophotometer. The effervescent floating matrix tablets were prepared by direct compression technique using hydroxypropyl methylcellulose (HPMCK4) and xanthan gum alone and in combination as release retardants. Microcrystalline cellulose was used as diluent. Sodium bicarbonate was used as effervescent agent. The prepared matrix tablets were evaluated for their physicochemical parameters such as weight variation, hardness, friability, content uniformity, buoyancy time, and in vitro dissolution. Results: Micromeritic properties and post-compression parameters were evaluated and all the parameters were found within the acceptable limit. The drug release data were subjected to different models to evaluate release kinetics and mechanism of drug release. The matrix tablets prepared with xanthan gum and a mixture of xanthan gum and HPMCK4 were retarded the drug release up to 12 h. The release mechanism of metronidazole was evaluated on the basis of release exponent n value in Peppas model. The n value of the formulations ranged from 0.46 to 0.89 which indicated Case II transport and zero-order release. Conclusion: Floating matrix tablet is the simple, efficient, and economic method to sustain the release of metronidazole to eradicate Helicobacter pylori in peptic ulcer disease.

scholarly journals Formulation and In-Vitro Evaluation of Sustained Release Matrix Tablets of Domperidone

2020 ◽  
Vol 8 (02) ◽  
pp. 40-45
Author(s):  
Chhitij Thapa ◽  
Roma Chaudhary
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Epigastric Pain ◽  
Matrix Tablets ◽  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Wet Granulation ◽  
In Vitro Drug Release ◽  
Weight Variation

INTRODUCTION Domperidone is a unique compound with gastro kinetic and antiemetic effects. It is used in the management of disorder by impaired motility like gastroesophageal reflux (in some instances), gastroparesis, dyspepsia, heartburn, epigastric pain, nausea, vomiting, and colonic inertia. The sustained release system is a widely accepted approach for slow drug release over an extended period to address the challenges of conventional oral delivery, including dosing frequency, drug safety, and efficacy. The study aims to formulate a domperidone sustained release tablet and compare the dissolution rate with the marketed formulations. MATERIAL AND METHODS Sustained release matrix tablets of domperidone were prepared by wet granulation method using different polymers such as HPMC K4M, ethyl cellulose, Gum acacia. Pre-compression studies like angle of repose, bulk density, tapped density, Carr's index, and Hausner’s ratio, and post-compression studies like weight variation, thickness, hardness, friability, drug content, and in-vitro drug release were evaluated.   RESULTS The release profile of domperidone sustained-release tablets was studied spectrophotometrically. The in-vitro dissolution study suggests the minimum %-cumulative drug release with 98.33% in F5. The %-cumulative drug release was maximum in F3 with 99.69%. The in-vitro drug release of all the formulations was non-significant compared to the marketed formulation (p<0.05), exhibiting the sustained-release property by all the formulations. CONCLUSION The pre-compression study concludes the better flow property of the granules of different formulations. The sustained release domperidone tablets were prepared successfully by the wet granulation method. The post-compression parameters of different formulations were within the acceptable range.

scholarly journals Formulation, Optimization and in vitro Characterization of Stavudine Gastro Retentive Floating Matrix Tablets

2016 ◽  
Vol 8 (03) ◽  
Author(s):  
Mahendar Rupavath ◽  
Kranthi G. ◽  
Chinna Palem ◽  
K. S. K. Patnaik
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Wet Granulation ◽  
Drug Bioavailability ◽  
In Vitro Drug Release ◽  
Weight Variation

The aim of the present investigation was to develop floating matrix tablets of stavudine to achieve prolong gastric residence time, leading to an increase in drug bioavailability and patient compliance. Floating tablets were prepared by wet granulation technique, using hydroxypropyl methylcellulose (HPMC K15M) as synthetic, pullulan gum as natural rate controlling polymers and optimum amounts of sodium-bicarbonate and citric acid as gas generating agents in suitable ratios to generate optimum buoyancy. Developed formulations were evaluated for weight variation, thickness, hardness, friability, drug content, in vitro drug release, floating lag time and floating buoyancy. All the formulations exhibited acceptable physical properties and the best formulation (F3) was selected based on in vitro characteristics. Further, the optimized formulation was evaluated for in vivo radiographic studies by incorporating BaSO4 as radio opaque substance. All the formulations were studied for in vitro drug release characteristics for 16 h. Optimized formulation showed controlled and prolonged drug release profiles while floating over the dissolution medium. Diffusion followed by erosion drug release mechanism was observed for the formulation, indicating that water diffusion and polymer erosion played an essential role in drug release. In vivo radiographic studies revealed that the tablets remained in the stomach for 8 ± 0.5 h in fasting human volunteers and indicated that gastric retention time was increased by the floating principle, which was considered and desirable for absorption window drugs.

scholarly journals Double-layer Tablets of Lornoxicam: Validation of Quantification Method, In vitro Dissolution and Kinetic Modelling

2015 ◽  
Vol 14 (9) ◽  
pp. 1659-1666
Author(s):  
Ü Gönüllü ◽  
P Gürpınar ◽  
M Üner
Keyword(s):  
Drug Release ◽  
Double Layer ◽  
Oral Delivery ◽  
Kinetic Modelling ◽  
Uv Spectroscopy ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Weight Variation

Purpose: To formulate double-layer tablets of lornoxicam (LRX) prepared by direct compression method and evaluate their physical and drug release  characteristics.Methods: The outer layer of tablets, composed of microcrystalline cellulose (MCC), starch and lactose, incorporated tan initial or prompt dose of the drug (4 mg) for immediate release. Hydroxypropyl methylcellulose (HPMC), polyvinylpyrrolidone (PVP K90) and carbomer, in varying concentrations, were used to prepare the tablet cores for sustained drug delivery. Weight variation, dimensions, hardness,  tensile strength, friability and disintegration time of the tablets were evaluated. Drug release from double-layer tablets as well as kinetic models of drug release were determined after validating the method used for the quantification of the drug. The analytical method for quantification of LRX by UV spectroscopy was validated and verified for linearity, intra-day and inter-day precision, accuracy, recovery and specifity.Results: Tablet cores based on HPMC and HPMC:PVP K90 mixture displayed better compression and flow properties (good and fair to passable) than those  formulated with PVP K90 and carbomer (poor). Satisfactory results were obtained from all the tablet formulations met compendial requirements. The slowest drug release rate was obtained with tablet cores based on PVP K90 (1.21 mg%.h-1). Drug release followed Higuchi kinetic model and the tablet cores released drug by diffusion/polymer relaxation or diffusion/erosion.Conclusion: Double-layer tablet formulation of lornoxicam based on HPMC or HPMC-PVP mixture is suitable for the treatment of inflammatory and painful conditions.Keywords: Lornoxicam, Controlled release, Double-layer tablets, Non-steroidal antiinflammatory drug, Oral delivery

scholarly journals Formulation and evaluation of sustained release matrix tablet of captopril

2019 ◽  
Vol 9 (4-A) ◽  
pp. 260-268
Author(s):  
SIMRAN SHIVDAS PAWAR ◽  
Prashant S. Malpure ◽  
Santosh S Surana ◽  
Jayashri S Bhadane
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Content Uniformity ◽  
Matrix Tablet ◽  
Compression Technique ◽  
Weight Variation

The objective of the present study was to study the effect of polymers on sustained release of Captopril from tablets. Compatibility was studied by Fourier transform infrared spectroscopy and DSC. The tablets were prepared by direct compression technique using Xanthan gum and Ethyl Cellulose. The prepared matrix tablets were evaluated for their physicochemical parameters such as weight variation, hardness, friability, content uniformity and in-vitro dissolution. Pre and post compression parameters were evaluated and all the parameters were found within the limit. The drug release data were subjected to different models in order to evaluate release kinetics and mechanism of drug release. Formulation F4 was selected as best formulation. The dissolution of formulation F4 can be Shows Non-fickian drug release mechanism.

FORMULATION DEVELOPMENT OF MATRIX TABLET OF STAVUDINE BY USING CARBOXY METHYL TAMARIND KERNEL POWDER AS A NOVEL DRUG RELEASE RETARDING AGENT

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (04) ◽  
pp. 28-36
Author(s):  
R. R Karmarkar ◽  
◽  
M. P Wagh ◽  
S.R Baviskar ◽  
S.H Patil ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Matrix Tablet ◽  
Formulation Development ◽  
Compression Technique ◽  
Novel Drug ◽  
Carboxy Methyl

The aim of the present study was to evaluate carboxy methyl tamarind kernal powder as a novel drug release retarding agent. To evaluate the same, sustained release matrix tablets of stavudine were prepared by using HPMC K4M and carboxy methyl tamarind kernal powder, by using a direct compression technique. The formulations were prepared by using different drug: polymer ratios into formulations such as F1 to F9. The compressed tablets were evaluated for thickness, hardness, friability, drug content and in vitro dissolution rates. Formulation F6, having a hardness of 5.46 ± 0.25, showed the desired release profile for a period of 24 h in simulated intestinal fluids (pH 7.4). Kinetic data treatment indicated that the release of stavudine from the matrix tablet follows coupling of diffusion and erosion mechanisms. The study proves that the optimized sustained release tablet is capable of releasing the drug in a sustained manner for 24 h.

Sign in / Sign up

Export Citation Format

Share Document