scholarly journals BUILDING TO THE REG YACHT CODES

2019 ◽  
Author(s):  
J C Smith ◽  
C Vinelli
Keyword(s):  
Best Practice ◽  
Regulatory Framework ◽  
Lessons Learned ◽  
International Standards ◽  
Construction Process ◽  
Industry Standards ◽  
Technical Considerations ◽  
Design And Construction

The Red Ensign Group (REG) has recently completed the development of an updated regulatory framework for Yachts, entitled the ‘REG Yacht Code’, which entered into force on the 1st of January 2019. The Code’s aim is to further develop the well-established industry standards of the Large Commercial Yacht Code (LY3), combining the lessons learned from almost 20 years of regulating the Large Yacht sector since the first version of the Code was published in 1997 & Passenger Yacht Code (PYC) since the 1st edition was published in 2010. The revised text makes larger use of industry best practice, international standards and the IMO’s overarching remit for the provision of increased ‘Goal Based Standards’ with the intention of allowing room for more flexibility and innovation in the design and construction of Large Yachts. Here, the principle changes to the Code are presented in addition to the benefits and challenges that are associated with achieving compliance. Finally, the key technical considerations during the design and construction process when building to Parts A and B are discussed.

ENVIRONMENTAL AND SAFETY LEGISLATION FOR THE OFFSHORE OIL AND GAS SECTOR IN KAZAKHSTAN: A CRITICAL REVIEW

2005 ◽  
Vol 07 (04) ◽  
pp. 705-733
Author(s):  
JUAN PALERM ◽  
INESSA RUDENKO ◽  
JEAN-LOUIS TEURLAI ◽  
TATYANA VASSILEVSKAYA ◽  
JOSEP RENAU
Keyword(s):  
Best Practice ◽  
Oil And Gas ◽  
Regulatory System ◽  
Regulatory Framework ◽  
International Standards ◽  
Industrial Safety ◽  
The Caspian Sea ◽  
Standards And Regulations ◽  
Offshore Oil And Gas ◽  
Offshore Oil

Kazakhstan has shown an increase in its offshore oil and gas (O&G) prospection and operation activities in the Caspian Sea since 1998, so far with a limited number of operators, but which is about to increase significantly. This is of concern, considering that the environmental and industrial safety regulatory framework is still inadequate for the prevention of pollution from a large number of operators in a very sensitive aquatic ecosystem. This paper reports on the results of a study undertaken for the European Commission Tacis programme aimed at enhancing the environmental and industrial safety regulatory framework in order to align it with EU and international best practice. Based on a comprehensive analysis of applicable international standards and regulations, as well as those of Kazakhstan, ten issues are identified which require urgent attention. These issues are discussed and recommendations made on how to address them in order to improve the regulatory system.

scholarly journals School Change: Emerging Findings of How to Achieve the “Buzz”

2020 ◽  
pp. 61-72
Author(s):  
Raechel French
Keyword(s):  
School Change ◽  
Best Practice ◽  
Research Question ◽  
Organizational Structures ◽  
Construction Process ◽  
Engaged Learning ◽  
Teaching Culture ◽  
Course Of Action ◽  
Innovative Learning ◽  
Design And Construction

AbstractThis chapter explores emerging findings from the research question, “What characterizes a successful transition of a school from traditional classrooms to an innovative learning environment in the context of the design and construction process?” Many schools today are trading in their identical classroom model for activity-driven, technology-infused spaces and envision a future in which teaching, culture, and space align seamlessly resulting in the intangible “buzz” of engaged learning. However, research and experience show many of these schools fail to supplement the design and construction process with initiatives to align teaching practices, organizational structures, and leadership with the intended vision. This often results in a misalignment between the pedagogical goals of the building and its subsequent use. To provide a research-based course of action for transitioning schools and a basis for future Ph.D. study, exploratory case studies were completed of schools operating in new buildings and having achieved this “buzz”. Emerging best-practice processes and tools are shared.

The role of standardization as a key Tool of Quality Economics in the development of integration of the Eurasian Economic Union

2019 ◽  
pp. 14-19
Author(s):  
V. V. Okrepilov ◽  
A. G. Gridasov
Keyword(s):  
Economic Integration ◽  
Legal Framework ◽  
Regulatory Framework ◽  
International Standards ◽  
Member States ◽  
Scientific Methods ◽  
Goods And Services ◽  
Eurasian Economic Union ◽  
Economic Union

The presented study examines the experience of forming a regulatory framework for the integration of the Eurasian Economic Union (EAEU) member states through the example of standardization as one of the key tools of quality economics.Aim. The study analyzes the major solutions of the EAEU authorities and member countries aimed at increasing the role of standardization in the economic integration of the Union over five years of its existence.Tasks. The authors identify efficient methods for developing standardization for the integration of the EAEU states as well as the most problematic aspects in this field that need to be taken into account in the qualitative strengthening of the Union’s economy.Methods. This study uses general scientific methods of cognition to examine the activities of the EAEU authorities and member states aimed at creating a system for the economic integration of the Union during a period of its transition from separate national markets towards a single (common) market.Results. Over five years of operation in the field of stadardization, the Eurasian Economic Union has created the necessary organizational and legal framework to ensure the successful development of integration processes. The national legislation on standardization has been modernized with allowance for the harmonization of these laws. In the next five-six years, the development of international standards for 40 technical regulations is expected to be completed, which would create a regulatory framework for unhindered interaction between all participants of the single (common) EAEU market. Conclusions. The analysis of activities in the field of standardization reveals a sufficiently thought-out and coordinated policy of the EAEU states in creating the necessary conditions for overcoming legal and administrative barriers in the movement of goods and services within the common economic space of the EAEU.

CURRENT STATE OF REGULATION OF INTERNAL FINANCIAL CONTROL AND INTERNAL FINANCIAL AUDIT IN THE BUDGET SECTOR

2020 ◽  
Vol 1 (9) ◽  
pp. 119-124
Author(s):  
D. R. GINIYATULLINA ◽  
◽  
◽  
Keyword(s):  
Internal Control ◽  
Internal Audit ◽  
Regulatory Framework ◽  
International Standards ◽  
Financial Control ◽  
Budget Process ◽  
Federal Law ◽  
Government Sector ◽  
General Government ◽  
Financial Audit

Since 2013, there has been an active transformation of the regulatory framework related to the implementation of international standards of internal audit in Russian practice, which regulates the organization and implementation of internal financial control and internal financial audit in the general government sector. However, the regulatory framework is constantly undergoing changes that are associated with the need to take into account the specifics of the functioning of these organizations. Particular attention is paid to the development of the methodological foundations of internal financial control and audit on the basis of amendments made by the Federal Law of July 26.07.2019, 199-FZ to the Budget Code of the Russian Federation. In particular, internal financial control was removed from the budgetary powers of participants in the budget process. When these changes were implemented, a lot of questions arose, such as the exclusion of internal financial control as a separate budgetary authority means that this type of control can be omitted, journals and internal control cards are not kept.

scholarly journals Construction of a quality model for machine learning systems

2021 ◽  
Author(s):  
Julien Siebert ◽  
Lisa Joeckel ◽  
Jens Heidrich ◽  
Adam Trendowicz ◽  
Koji Nakamichi ◽  
...  
Keyword(s):  
Machine Learning ◽  
Lessons Learned ◽  
Training Data ◽  
Use Case ◽  
Construction Process ◽  
Quality Model ◽  
Quality Models ◽  
Quality Properties ◽  
Reference Quality ◽  
Industrial Use

AbstractNowadays, systems containing components based on machine learning (ML) methods are becoming more widespread. In order to ensure the intended behavior of a software system, there are standards that define necessary qualities of the system and its components (such as ISO/IEC 25010). Due to the different nature of ML, we have to re-interpret existing qualities for ML systems or add new ones (such as trustworthiness). We have to be very precise about which quality property is relevant for which entity of interest (such as completeness of training data or correctness of trained model), and how to objectively evaluate adherence to quality requirements. In this article, we present how to systematically construct quality models for ML systems based on an industrial use case. This quality model enables practitioners to specify and assess qualities for ML systems objectively. In addition to the overall construction process described, the main outcomes include a meta-model for specifying quality models for ML systems, reference elements regarding relevant views, entities, quality properties, and measures for ML systems based on existing research, an example instantiation of a quality model for a concrete industrial use case, and lessons learned from applying the construction process. We found that it is crucial to follow a systematic process in order to come up with measurable quality properties that can be evaluated in practice. In the future, we want to learn how the term quality differs between different types of ML systems and come up with reference quality models for evaluating qualities of ML systems.

Chemical Deliquification of Unconventional Gas Wells

2014 ◽  
Author(s):  
K.. Francis-LaCroix ◽  
D.. Seetaram
Keyword(s):  
Natural Gas ◽  
Best Practice ◽  
Oil And Gas ◽  
Large Deviation ◽  
Cost Effective ◽  
Gas Production ◽  
Lessons Learned ◽  
Offshore Platforms ◽  
Gas Wells ◽  
Current Production

Abstract Trinidad and Tobago offshore platforms have been producing oil and natural gas for over a century. Current production of over 1500 Bcf of natural gas per year (Administration, 2013) is due to extensive reserves in oil and gas. More than eighteen of these wells are high-producing wells, producing in excess of 150 MMcf per day. Due to their large production rates, these wells utilize unconventionally large tubulars 5- and 7-in. Furthermore, as is inherent with producing gas, there are many challenges with the production. One major challenge occurs when wells become liquid loaded. As gas wells age, they produce more liquids, namely brine and condensate. Depending on flow conditions, the produced liquids can accumulate and induce a hydrostatic head pressure that is too high to be overcome by the flowing gas rates. Applying surfactants that generate foam can facilitate the unloading of these wells and restore gas production. Although the foaming process is very cost effective, its application to high-producing gas wells in Trinidad has always been problematic for the following reasons: Some of these producers are horizontal wells, or wells with large deviation angles.They were completed without pre-installed capillary strings.They are completed with large tubing diameters (5.75 in., 7 in.). Recognizing that the above three factors posed challenges to successful foam applications, major emphasis and research was directed toward this endeavor to realize the buried revenue, i.e., the recovery of the well's potential to produce natural gas. This research can also lead to the application of learnings from the first success to develop treatment for additional wells, which translates to a revenue boost to the client and the Trinidad economy. Successful treatments can also be used as correlations to establish an industry best practice for the treatment of similarly completed wells. This paper will highlight the successes realized from the treatment of three wells. It will also highlight the anomalies encountered during the treatment process, as well as the lessons learned from this treatment.

Academic Integrity and Audiobooks

LOGOS ◽  
2021 ◽  
Vol 32 (2) ◽  
pp. 34-42
Author(s):  
Sarah Bacaller
Keyword(s):  
Academic Integrity ◽  
Best Practice ◽  
Aesthetic Experience ◽  
Publishing Industry ◽  
Early Stage ◽  
Significant Issue ◽  
Industry Standards ◽  
Practice Framework ◽  
To Receive ◽  
Case Basis

Abstract Audiobooks offer increased accessibility and new ways of engaging with scholarly texts. Although the development of academic audiobooks is in a relatively early stage, one significant issue that is yet to receive appropriate attention is the presentation of referenced materials in audio form. Presently, this is approached on a case-by-case basis with no centralized industry standards, and so protocols are either set by individual publishers or negotiated between rights-holders and narrators. Narrators usually adopt one of four options for dealing with notes or other referencing tools: complete omission; addition of audio effects to differentiate the reading of references from the primary narrative; reading the reference notes at the end of a chapter or the book; or including with the audiobook files an optional PDF download with reference details. These options give consideration to aesthetic issues, but it is uncertain whether they do justice to questions of academic integrity. The purpose of this article is to encourage scholarly dialogue and a conversation between the audio publishing industry and academia on this issue, and to begin working towards a ‘best practice’ framework that satisfies questions of both aesthetic experience and academic integrity.

Countering Violent Extremism in Canada and Abroad

2018 ◽  
Author(s):  
Nora Abdelrahman Ibrahim
Keyword(s):  
Best Practice ◽  
Unintended Consequences ◽  
Lessons Learned ◽  
Policy And Practice ◽  
Far Right ◽  
Significant Development ◽  
The Us ◽  
Violent Extremism ◽  
Recent Trends ◽  
The Uk

Terrorism and violent extremism have undoubtedly become among the top security concerns of the 21st century. Despite a robust agenda of counterterrorism since the September 11, 2001 attacks, the evolution of global terrorism has continued to outpace the policy responses that have tried to address it. Recent trends such as the foreign fighter phenomenon, the rampant spread of extremist ideologies online and within communities, and a dramatic increase in terrorist incidents worldwide, have led to a recognition that “traditional” counterterrorism efforts are insufficient and ineffective in combatting these phenomena. Consequently, the focus of policy and practice has shifted towards countering violent extremism by addressing the drivers of radicalization to curb recruitment to extremist groups. Within this context, the field of countering violent extremism (CVE) has garnered attention from both the academic and policy-making worlds. While the CVE field holds promise as a significant development in counterterrorism, its policy and practice are complicated by several challenges that undermine the success of its initiatives. Building resilience to violent extremism is continuously challenged by an overly securitized narrative and unintended consequences of previous policies and practices, including divisive social undercurrents like Islamophobia, xenophobia, and far-right sentiments. These by-products make it increasingly difficult to mobilize a whole of society response that is so critical to the success and sustainability of CVE initiatives. This research project addresses these policy challenges by drawing on the CVE strategies of Canada, the US, the UK, and Denmark to collect best practice and lessons learned in order to outline a way forward. 

Multistage Openhole Completion Using Integrated Dynamic Diversion Frac Technique in Highly Depleted Well: First Successful Application in West Kuwait Field

2021 ◽  
Author(s):  
Abdullah Abu-Eida ◽  
Salem Al-Sabea ◽  
Milan Patra ◽  
Bader Akbar ◽  
Kutbuddin Bhatia ◽  
...  
Keyword(s):  
Best Practice ◽  
Treatment Options ◽  
High Energy ◽  
Lessons Learned ◽  
High Potential ◽  
Fracture Plane ◽  
Fluid Loss ◽  
Field Development ◽  
Two Fluids

Abstract The Minagish field in West Kuwait is a high potential field which poses several challenges in terms of hydrocarbon flow assurance through highly depleted tight carbonate intervals with uneven reservoir quality and curtailed mobility. These conditions have shifted the field development from vertical to horizontal wellbore completions. Achieving complete wellbore coverage is a challenge for any frac treatment performed in a long openhole lateral with disparities in reservoir characteristics. The fluid will flow into the path of least resistance leaving large portions of the formation untreated. As a result, economic fracturing treatment options dwindle significantly, thus reservoir stimulation results are not always optimum. A multistage fracturing technique using Integrated Dynamic Diversion (IDD) has been performed first time in West Kuwait field well. The process uses active fluid energy to divert flow into a specific fracture point in the lateral, which can initiate and precisely place a fracture. The process uses two self-directed fluid streams: one inside the pipe and one in the annulus. The process mixes the two fluids downhole with high energy to form a consistent controllable mixture. The technique includes pinpoint fluid jetting at the point of interest, followed by in-situ HCL based crosslinked systems employed for improving individual stage targets. The IDD diversion shifts the fracture to unstimulated areas to create complex fractures which increases reservoir contact volume and improved overall conductivity in the lateral. The kinetic and chemical diversion of the IDD methodology is highly critical to control fluid loss in depleted intervals and results in enhanced stimulation. Pumping a frac treatment in openhole without control would tend to initiate a longitudinal fracture along the wellbore and may restrict productivity. By using specialized completion tools with nozzles at the end of the treating string, a new pinpoint process has been employed to initiate a transverse fracture plane in IDD applications. Proper candidate selection and fluid combination with in-situ crosslink acid effectively plug the fracture generated previously and generate pressure high enough to initiate another fracture for further ramification. By combining these processes into one continuous operation, the use of wireline/coiled tubing for jetting, plug setting and milling is eliminated, making the new multistage completion technology economical for these depleted wells. The application of the IDD methodology is a fit-for-purpose solution to address the unique challenges of openhole operations, formation technical difficulties, high-stakes economics, and untapped high potential from intermittent reservoirs. The paper will present post-operation results of this completion from all fractured zones along the lateral and will describe the lessons learned in implementation of this methodology which can be considered as best practice for application in similar challenges in other fields.

Sign in / Sign up

Export Citation Format

Share Document