Effects of Marble Waste on Properties of Polymer Concrete

2017 ◽  
Vol 21 ◽  
pp. 213-218 ◽  
Author(s):  
Marinela Barbuta ◽  
Adrian Alexandru Şerbănoiu ◽  
Costel Cadere ◽  
Catalina Mihaela Helepciuc
Keyword(s):  
Mechanical Properties ◽  
Epoxy Polymer ◽  
Polymer Concrete ◽  
Sem Images ◽  
Split Tensile Strength ◽  
Pollution Problem ◽  
Glass Marble ◽  
Slag Glass ◽  
Save Energy ◽  
Marble Waste

The quantities of wastes, generated in industry are increasing every year. Their utilization became a priority for solving pollution problem and save energy and resources. The wastes are investigated as materials for obtaining new concretes with different applications. Polymer concrete is a composite material, in which the aggregates of different sorts are bound together by a resin. As in the case of cement concrete, different types of wastes (slag, glass, marble, etc.) can replace the aggregates or they can be added in the concrete composition as filler (silica powder, fly ash, calcareous powder, etc). The use of wastes presents some advantages such as: obtaining of new products at lower prices, in some cases with improved properties; consuming of wastes helps to clean the environment; preservation of natural resources which are replaced by wastes; etc.In the experimental study, marble waste is used for obtaining epoxy polymer concrete. The effects of this type of waste on the mechanical properties of polymer concrete were investigated. Two types of concrete were prepared: one with powder of marble as addition and the other type with aggregates of marble waste. The mechanical properties (compressive strength, flexural strength, split tensile strength) were experimentally determined and compared with the characteristics of epoxy polymer concrete (considered as reference mix). The microstructure of polymer concrete with marble waste was analyzed by SEM images. The marble waste influenced the mechanical properties of epoxy polymer concrete. Higher values of mechanical properties were obtained when the marble was used as aggregates. As addition in epoxy polymer concrete, the dosage and finesse of marble had influenced the values of mechanical properties.

scholarly journals Residual Flexural Performance of Epoxy Polymer Concrete under Hygrothermal Conditions and Ultraviolet Aging

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3472
Author(s):  
Ma ◽  
Pan ◽  
Liu ◽  
Jiang ◽  
Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Layer ◽  
Flexural Strength ◽  
Aging Time ◽  
Uv Radiation ◽  
Aging Process ◽  
Epoxy Polymer ◽  
Polymer Concrete ◽  
Flexural Performance ◽  
Layered Beam

Epoxy polymer concrete (EPC) has found increasing applications in infrastructure as a rising candidate among civil engineering materials. In most of its service environments, EPC is inevitably exposed to severe weather conditions, e.g., violent changes in temperature, rain, and ultraviolet (UV) radiation. In this paper, we designed an accelerated aging test for EPC, which includes periodic variation of temperature and water spray, as well as intensive UV-light irradiation, imitating the outdoor environment in South China. The experimental results show that the flexural performance of EPC is found deteriorate with the aging time. An aging process equivalent to four years (UV radiation dose) results in up to 8.4% reduction of flexural strength. To explore the mechanisms of observed performance degradation, the EPC specimen in the four-point-bending test is considered as a layered beam. The analysis indicates that the loss of flexural load-carrying capacity of an aged EPC beam is dominated by the reduction of mechanical properties of the surface layer. The mechanical properties of the surface layer are closely associated with the aging of epoxy mortar, which can be approximated as a reciprocal function of the aging time. By introducing damage to the surface layer into the layered beam, the proposed model demonstrates a good ability to predict the residual flexural strength of EPC during the aging process

scholarly journals Mechanical Properties of Fly Ash Polymer Concrete with Different Fibers

2018 ◽  
Vol 55 (3) ◽  
pp. 405-409 ◽  
Author(s):  
Marinela Barbuta ◽  
Alexandru Timu ◽  
Liliana Bejan ◽  
Roxana Dana Bucur
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Polymer Concrete ◽  
Test Results ◽  
Material Industry ◽  
Split Tensile Strength ◽  
Building Material Industry ◽  
Concrete Properties ◽  
Different Types ◽  
General Demand

The experimental results obtained by studying the influence of different types of fibers on the mechanical properties of fly ash polymer concrete are presented in the paper. The general demand of using wastes found applicability in building material industry because some of them are beneficial in improving concrete properties. The waste additions type fly ash and fibers were incorporated in polymer concrete. The study focused on fibers type glass, polyester, metallic and cellulose. The mechanical properties such as compressive strength, flexural strength and split tensile strength were investigated having in view the type, dosage and length of fibers. The results show that fibers improved mechanical properties in comparison with that of polymer concrete without fibers, the test results being differently influenced by the factors which were considered.

Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects

2020 ◽  
Vol 232 ◽  
pp. 117229 ◽  
Author(s):  
Wahid Ferdous ◽  
Allan Manalo ◽  
Hong S. Wong ◽  
Rajab Abousnina ◽  
Omar S. AlAjarmeh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Optimal Design ◽  
Epoxy Polymer ◽  
Polymer Concrete

scholarly journals Evaluation of Carbon Nanotube Incorporation in Cementitious Composite Materials

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1504 ◽  
Author(s):  
Ana Catarina Jorge Evangelista ◽  
Jorge Fernandes de Morais ◽  
Vivian Tam ◽  
Mahfooz Soomro ◽  
Leandro Torres Di Gregorio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotube ◽  
Portland Cement ◽  
New Technologies ◽  
Cement Mortar ◽  
Construction Material ◽  
Optimal Dosage ◽  
Potential Contribution ◽  
Sem Images ◽  
Split Tensile Strength

Over the last decades, new materials with outstanding performance have been introduced in the construction industry. Considering these new technologies, it is worth mentioning that nanotechnology has revolutionized various areas of engineering. In the area of civil engineering and construction, cement is used for various purposes and the search to improve its performance has been receiving growing interest within the scientific community. The objective of this research was to evaluate the behavior of cement mortar produced by the addition of multi-walled carbon nanotubes (MWCNTs) in different concentrations by comparing their physical and mechanical properties with the properties of the nanotube-free composite. Motivated by the lack of consensus in the literature concerning to the optimal dosage of CNTs in cementitious matrices, three different carbon nanotube ratios, 0.20, 0.40 and 0.60 wt % Portland cement, were investigated with the aim of evaluating the mechanical properties. Destructive tests were carried out to determine the compressive strength, flexural strength and split tensile strength. Additionally, a non-destructive test was performed to determine the dynamic elastic modulus and density. Scanning electron microscopy (SEM) images showed the interaction between the MWCNTs and the hydration products of Portland cement mortar. The results indicated the potential contribution of 0.40 wt % cement CNTs to the enhancement of the mechanical properties of the cement composite as a promising construction material.

scholarly journals An Experimental Study on the Dynamic Mechanical Properties of Epoxy Polymer Concrete under Ultraviolet Aging

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2074
Author(s):  
Yutian Liao ◽  
Dongpeng Ma ◽  
Yiping Liu ◽  
Zhenyu Jiang ◽  
Zejia Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Ultraviolet Radiation ◽  
Strain Rate ◽  
Impact Velocity ◽  
Growth Stage ◽  
Linear Growth ◽  
Epoxy Polymer ◽  
Accelerated Aging ◽  
Polymer Concrete ◽  
Engineering Practice

Epoxy polymer concrete (EPC) is widely applied in engineering for its excellent mechanical properties. The impact loads and severe climatic conditions such as ultraviolet radiation, temperature change and rain erosion are in general for its engineering practice, potentially degrading the performance of EPC. In this paper, a procedure of accelerated aging for EPC, imitating the aging effect of ultraviolet radiation and hygrothermal conditions based on the meteorological statistics of Guangzhou city, was designed. After various periods of accelerated aging, the dynamic behaviors of EPC were studied by using a Split Hopkinson Pressure Bar (SHPB). The verification of the experimental data was performed. The two-stage dynamic compression stress-strain curves were obtained: (a) linear growth stage following by strain hardening stage at impact velocity 12.2 m/s and 18.8 m/s, (b) linear growth stage and then a horizontal stage when impact velocity is 25.0 m/s, (c) linear growth stage following by strain softening stage at impact velocity 29.2 m/s. The experimental results show that the specimens after longer accelerated aging tend to be more easily broken, especially at impact velocity 12.2 m/s and 18.8 m/s, while the strain rate is the main factor affecting the compression strength and stiffness. Ultimately the influence of strain rate and equivalent aging time on dynamic increase factor was revealed by a fitting surface.

scholarly journals Experimental Study on the Mechanical Properties and Durability of High-Content Hybrid Fiber–Polymer Concrete

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6234
Author(s):  
Chaohua Zhao ◽  
Zhijian Yi ◽  
Weiwei Wu ◽  
Zhiwei Zhu ◽  
Yi Peng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Material Design ◽  
Polymer Concrete ◽  
Dense Layer ◽  
Hybrid Fiber ◽  
Sem Images ◽  
Cross Sectional ◽  
Fiber Concrete ◽  
Polymer Modified Concrete ◽  
Pavement Material

Polymer-modified concrete and fiber concrete are two excellent paving materials that improve the performance of some concrete, but the performance of single application material is still limited. In this paper, polymer-modified concrete with strong deformation and fiber concrete with obvious crack resistance and reinforcement effect were compounded by using the idea of composite material design so as to obtain a high-performance pavement material. The basic mechanical properties of high-content hybrid fiber–polymer-modified concrete, such as workability, compression, flexural resistance, and environmental durability (such as sulfate resistance) were studied by using the test regulations of cement concrete in China. The main results were as follows. (1) The hybrid fiber–polymer concrete displayed reliable working performance, high stiffness, and a modulus of elasticity as high as 35.93 GPa. (2) The hybrid fiber–polymer concrete had a compressive strength of 52.82 MPa, which was 31.2% higher than that of the plain C40 concrete (40.25 MPa); the strength of bending of the hybrid concrete was 11.51 MPa, 191.4% higher than that of the plain concrete (3.95 MPa). (3) The corrosion resistance value of the hybrid fiber–polymer concrete was 81.31%, indicating its adjustability to sulfate attack environments. (4) According to cross-sectional scanning electron microscope (SEM) images, the hybrid fiber–polymer concrete was seemingly more integrated with a dense layer of cementing substance on its surface along with fewer microholes and microcracks as when compared to the ordinary concrete. The research showed that hybrid fiber–polymer concrete had superior strength and environmental erosion resistance and was a pavement material with superior mechanical properties.

scholarly journals An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2950
Author(s):  
Hongwei Song ◽  
Xinle Li
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Three Dimensional ◽  
Cementitious Materials ◽  
Research Area ◽  
Cementitious Composites ◽  
Split Tensile Strength ◽  
Contour Crafting ◽  
Wide Range ◽  
Active Research

The most active research area is nanotechnology in cementitious composites, which has a wide range of applications and has achieved popularity over the last three decades. Nanoparticles (NPs) have emerged as possible materials to be used in the field of civil engineering. Previous research has concentrated on evaluating the effect of different NPs in cementitious materials to alter material characteristics. In order to provide a broad understanding of how nanomaterials (NMs) can be used, this paper critically evaluates previous research on the influence of rheology, mechanical properties, durability, 3D printing, and microstructural performance on cementitious materials. The flow properties of fresh cementitious composites can be measured using rheology and slump. Mechanical properties such as compressive, flexural, and split tensile strength reveal hardened properties. The necessary tests for determining a NM’s durability in concrete are shrinkage, pore structure and porosity, and permeability. The advent of modern 3D printing technologies is suitable for structural printing, such as contour crafting and binder jetting. Three-dimensional (3D) printing has opened up new avenues for the building and construction industry to become more digital. Regardless of the material science, a range of problems must be tackled, including developing smart cementitious composites suitable for 3D structural printing. According to the scanning electron microscopy results, the addition of NMs to cementitious materials results in a denser and improved microstructure with more hydration products. This paper provides valuable information and details about the rheology, mechanical properties, durability, 3D printing, and microstructural performance of cementitious materials with NMs and encourages further research.

scholarly journals Assessment of the Rheological and Mechanical Properties of Geopolymer Concrete Comprising Fly Ash and Fluid Catalytic Cracking Residue as Aluminosilicate Precursor

2021 ◽  
Vol 11 (7) ◽  
pp. 3032
Author(s):  
Tuan Anh Le ◽  
Sinh Hoang Le ◽  
Thuy Ninh Nguyen ◽  
Khoa Tan Nguyen
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Fly Ash ◽  
Flexural Strength ◽  
Catalytic Cracking ◽  
Fluid Catalytic Cracking ◽  
High Alumina ◽  
Geopolymer Concrete ◽  
Sem Images

The use of fluid catalytic cracking (FCC) by-products as aluminosilicate precursors in geopolymer binders has attracted significant interest from researchers in recent years owing to their high alumina and silica contents. Introduced in this study is the use of geopolymer concrete comprising FCC residue combined with fly ash as the requisite source of aluminosilicate. Fly ash was replaced with various FCC residue contents ranging from 0–100% by mass of binder. Results from standard testing methods showed that geopolymer concrete rheological properties such as yield stress and plastic viscosity as well as mechanical properties including compressive strength, flexural strength, and elastic modulus were affected significantly by the FCC residue content. With alkali liquid to geopolymer solid ratios (AL:GS) of 0.4 and 0.5, a reduction in compressive and flexural strength was observed in the case of geopolymer concrete with increasing FCC residue content. On the contrary, geopolymer concrete with increasing FCC residue content exhibited improved strength with an AL:GS ratio of 0.65. Relationships enabling estimation of geopolymer elastic modulus based on compressive strength were investigated. Scanning electron microscope (SEM) images and X-ray diffraction (XRD) patterns revealed that the final product from the geopolymerization process consisting of FCC residue was similar to fly ash-based geopolymer concrete. These observations highlight the potential of FCC residue as an aluminosilicate source for geopolymer products.

scholarly journals Mechanical and Morphological Properties of Bio-Phenolic/Epoxy Polymer Blends

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 773
Author(s):  
Ahmad Safwan Ismail ◽  
Mohammad Jawaid ◽  
Norul Hisham Hamid ◽  
Ridwan Yahaya ◽  
Azman Hassan
Keyword(s):  
Mechanical Properties ◽  
Phase Separation ◽  
Polymer Blends ◽  
Epoxy Polymer ◽  
Flexural Modulus ◽  
Polymeric Materials ◽  
Morphological Properties ◽  
Comparison Results ◽  
Unique Material ◽  
Different Types

Polymer blends is a well-established and suitable method to produced new polymeric materials as compared to synthesis of a new polymer. The combination of two different types of polymers will produce a new and unique material, which has the attribute of both polymers. The aim of this work is to analyze mechanical and morphological properties of bio-phenolic/epoxy polymer blends to find the best formulation for future study. Bio-phenolic/epoxy polymer blends were fabricated using the hand lay-up method at different loading of bio-phenolic (5 wt%, 10 wt%, 15 wt%, 20 wt%, and 25 wt%) in the epoxy matrix whereas neat bio-phenolic and epoxy samples were also fabricated for comparison. Results indicated that mechanical properties were improved for bio-phenolic/epoxy polymer blends compared to neat epoxy and phenolic. In addition, there is no sign of phase separation in polymer blends. The highest tensile, flexural, and impact strength was shown by P-20(biophenolic-20 wt% and Epoxy-80 wt%) whereas P-25 (biophenolic-25 wt% and Epoxy-75 wt%) has the highest tensile and flexural modulus. Based on the finding, it is concluded that P-20 shows better overall mechanical properties among the polymer blends. Based on this finding, the bio-phenolic/epoxy blend with 20 wt% will be used for further study on flax-reinforced bio-phenolic/epoxy polymer blends.

Sign in / Sign up

Export Citation Format

Share Document