Stability Analysis and Potential Seismic Capacity Evaluation of an Elliptic Paraboloid Latticed Shell

2012 ◽  
Vol 256-259 ◽  
pp. 2152-2160 ◽  
Author(s):  
Xiao Nong Duan ◽  
Zhu Juan Yang ◽  
Neng Tang ◽  
Xue Ting Chen
Keyword(s):  
Seismic Response ◽  
Structural Model ◽  
Linear Time ◽  
Response Spectrum ◽  
Time History ◽  
Initial Imperfection ◽  
Static Stability ◽  
Seismic Capacity ◽  
Elliptic Paraboloid ◽  
Response Characteristics

The stability and the potential seismic capacity of the double-layer elliptic paraboloid latticed shell roof structure of a stadium was analyzed and evaluated, performing by Midas Gen software. Firstly, the seismic response spectrum analyses and the linear time-history analyses were carried out respectively on two different analysis models: the integral structural model containing the lower support structure and the single latticed shell model. The seismic response characteristics and the potential seismic capacity of the models were compared and evaluated. Secondly, based upon the real detailed design of the stadium, the static stability of the latticed shell was analyzed, considering both the geometrical non-linearity and the initial imperfection. Thirdly, the influence of the effects of the vertical ground motion upon the latticed shell structure was studied. The analysis method adopted and the conclusions obtained can be used as references for the future similar engineering projects.

scholarly journals The implications of post-tensioning losses on the seismic response of Pres-Lam frames

2018 ◽  
Vol 51 (2) ◽  
pp. 57-69 ◽  
Author(s):  
Gabriele Granello ◽  
Alessandro Palermo ◽  
Stefano Pampanin ◽  
Tobias Smith ◽  
Francesco Sarti
Keyword(s):  
Seismic Response ◽  
Linear Time ◽  
Response Spectrum ◽  
Time History ◽  
Moment Capacity ◽  
History Analysis ◽  
Supplemental Damping ◽  
Column Joint ◽  
Post Tensioning ◽  
Wall Foundation

Since 2010, twelve post-tensioned timber (Pres-Lam) buildings have been constructed throughout the world. In high seismic areas, Pres-Lam technology typically combines unbonded post-tensioning tendons and supplemental damping devices to provide moment capacity to beam-column, wall-foundation or column-foundation connections. Over time creep within the timber elements leads to losses in post-tensioning forces reducing the connection moment capacity. This paper analyses how different post-tensioning loss scenarios, depending on the beam-column joint detailing, impact the building’s seismic response. Two case study buildings were designed and investigated using the Acceleration Displacement Response Spectrum (ADRS) method and Non-Linear Time History Analysis (NLTHA) to predict seismic performance. These buildings were considered to be located in areas of high and low seismic risk, leading to designs with and without the use of damping devices, respectively. The results show that the building with additional damping responded with similar peak displacements, even under extreme loss scenarios. In comparison, when supplemental damping was not used, peak displacements increased significantly with post tensioning losses.

A Development of the Visco-Elastic Damper for Timber Structure and a Suggestion of the Technological Design Assistance System

2013 ◽  
Vol 778 ◽  
pp. 714-721
Author(s):  
Katsuhiko Kohara ◽  
Takeshi Nomura ◽  
Kazuyoshi Koumoto
Keyword(s):  
Seismic Response ◽  
Elastic Body ◽  
Structural Model ◽  
Time History ◽  
Timber Structure ◽  
Response Analysis ◽  
Frame Design ◽  
Timber Frame ◽  
Loading Tests ◽  
Controlled Structure

Our research team developed a brace type and an angle brace type of the visco-elastic damper on seismic-response controlled structure for timber structure. We performed various dependence evaluations by the materials examination of the styrene olefin-based visco-elastic body which we developed newly. We made a structural model using the performance that loading tests in timber frame. We inspected the validity of the structural model. In addition, we built a technical support system for damper setting by the time history response analysis so that a general design architect was easy to use the damper. We could express dynamics properties of visco-elastic body properties by Voigt model, and the structural model almost accorded with an examination property value. We made a structural model of the whole frame system by Kb of installation rigidity obtained from loading tests in timber frame. Because a design level almost accorded with experimental value, the validity of the frame design on seismic-response controlled structure in consideration of the dependence (distortion, frequency, temperature) of the visco-elastic body was confirmed. This visco-elastic damper on seismic-response controlled structure acquired minister authorization of Ministry of Land, Infrastructure and Transport. In addition, this damper acquired the certification of the Japan Building Disaster Prevention Association.

Static and Dynamic Analysis for Tower in a High-Rise Steel Reinforced Concrete Composite Structure

2013 ◽  
Vol 788 ◽  
pp. 558-561
Author(s):  
Jian Qiang Wang ◽  
Wen Tao Ma ◽  
Min Jing Ma
Keyword(s):  
Reinforced Concrete ◽  
Composite Structure ◽  
Linear Time ◽  
Response Spectrum ◽  
Time History ◽  
Vibration Period ◽  
Small Earthquake ◽  
Steel Reinforced Concrete ◽  
Static And Dynamic Analysis ◽  
High Rise

Steel reinforced concrete composite structure which apply in the high-rise buildings, not only save steel, but also have excellent properties in fire prevention, anti-corrosion, and seismic performance, and improve the speed of construction, economic efficiency.This thesis based on the analyse of a steel reinforced concrete composite structure tower and the domestic and foreign experts study use Finite Element Analysis software SAP2000 analyze the dynamic Performance of the structure to draw the inherent vibration period and frequency of the structure. The structure is analyzed to obtain its deformation with different height of the structural elements under a small earthquake. Structure and component in elastic stage when suffur a small earthquake. Using the mode decomposition response spectrum method and method of linear time history analysis, the maximum horizontal displacements of the structural layer, the maximum inter-story displacement and the maximum inter-story displacement angle is obtained to see if the results within a predetermined range.

Stiffness Design for Specified Nonexceedance Probability of Seismic Response

1998 ◽  
Vol 14 (1) ◽  
pp. 165-188 ◽  
Author(s):  
Yutaka Nakamura ◽  
Tsuneyoshi Nakamura
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Seismic Response ◽  
Amplification Factor ◽  
Design Method ◽  
Response Spectrum ◽  
Time History ◽  
Stiffness Design ◽  
The Mean ◽  
Shear Building

A direct procedure is presented for generating a response spectrum for an arbitrary nonexceedance probability from a prescribed design mean response spectrum. An amplification factor is derived to estimate the maximum response values of an MDOF system for a nonexceedance probability from the mean maximum ones. An efficient stiffness design method for a shear building is developed with the use of its fundamental frequency and translational eigenvector as parameters for adjusting the nonexceedance probability of the seismic drifts to the specified value. The validity and accuracy of the proposed method are demonstrated by a Monte Carlo simulation together with time-history analyses.

Development of an Evaluation Method for Seismic Isolation Systems of Nuclear Power Facilities: Part 3 — Seismic Response of Crossover Piping for Seismic Isolation System

2014 ◽  
Author(s):  
Akihito Otani ◽  
Teruyoshi Otoyo ◽  
Hideo Hirai ◽  
Hirohide Iiizumi ◽  
Hiroshi Shimizu ◽  
...  
Keyword(s):  
Seismic Response ◽  
Nuclear Power ◽  
Seismic Isolation ◽  
Evaluation Method ◽  
Response Spectrum ◽  
Time History ◽  
Response Analysis ◽  
Isolation System ◽  
Isolation Systems ◽  
Seismic Isolation Systems

This paper, which is part of the series entitled “Development of an Evaluation Method for Seismic Isolation Systems of Nuclear Power Facilities”, shows the linear seismic response of crossover piping installed in a seismically isolated plant. The crossover piping, supported by both isolated and non-isolated buildings, deforms with large relative displacement between the two buildings and the seismic response of the crossover piping is caused by two different seismic excitations from the buildings. A flexible and robust structure is needed for the high-pressure crossover piping. In this study, shaking tests on a 1/10 scale piping model and FEM analyses were performed to investigate the seismic response of the crossover piping which was excited and deformed by two different seismic motions under isolated and non-isolated conditions. Specifically, as linear response analysis of the crossover piping, modal time-history analysis and response spectrum analysis with multiple excitations were carried out and the applicability of the analyses was confirmed. Moreover, the seismic response of actual crossover piping was estimated and the feasibility was evaluated.

Seismic Response Spectrum in Lieu of Time History Analysis for Subsea Structure Design

2017 ◽  
Author(s):  
George Wang ◽  
Michelle Loh ◽  
Yen-Tun Peng ◽  
Joanne Shen ◽  
P. E. Genesis ◽  
...  
Keyword(s):  
Seismic Response ◽  
Response Spectrum ◽  
Time History ◽  
Time History Analysis ◽  
Structure Design ◽  
History Analysis

scholarly journals Linear and Nonlinear Dynamic Analysis of Masonry Infill RC Framed Buildings

2017 ◽  
Vol 3 (10) ◽  
pp. 881 ◽  
Author(s):  
Ayman Mohammed Abd-Elhamed ◽  
Sayed Mahmoud
Keyword(s):  
Dynamic Analysis ◽  
Seismic Response ◽  
Response Spectrum ◽  
Nonlinear Dynamic Analysis ◽  
Time History ◽  
Considerable Change ◽  
Infill Walls ◽  
Masonry Infill ◽  
Soft Story ◽  
Rc Frame Buildings

This paper aimed to investigate the seismic response of reinforced concrete (RC) frame buildings under linear and non-linear dynamic analysis. Different building models as bare frame and fully masonry infill frame have been developed for performing the analysis. In order to investigate the effect of irregular distributions of masonry infill walls in elevation on the seismic response behavior, an infill frame model with soft story has also been developed. The linear response spectrum (RS) dynamic analysis and the nonlinear time-history (TH) analysis methods are employed. Moreover, the induced energies in terms of input, potential and kinetic are also obtained from the TH analysis. Moreover, the interaction between infill walls and frames leads to considerable change in the induced responses comparable with the bare model. 

Study on Piping Response Under Multiple Excitation: Part 2 — Validation for Multiple Excitation Analysis of Piping

2013 ◽  
Author(s):  
Satoru Kai ◽  
Tomoyoshi Watakabe ◽  
Naoaki Kaneko ◽  
Kunihiro Tochiki ◽  
Makoto Moriizumi ◽  
...  
Keyword(s):  
Seismic Response ◽  
Seismic Design ◽  
Nuclear Power ◽  
Response Spectrum ◽  
Time History ◽  
Response Spectra ◽  
Shaking Table ◽  
Response Analysis ◽  
Multiple Time ◽  
Floor Response Spectra

The piping in a nuclear power plant is laid across multiple floors of a single building or two buildings, which are supported at many points. As the piping is excited by multiple-inputs from the supporting points during an earthquake, seismic response analysis by multiple excitations is needed to obtain the exact seismic response of the piping. However, few experiments involving such multiple excitation have been performed to verify the validity of multiple excitation analysis. Therefore, analysis of the seismic design of piping in Japan is performed by the enveloped Floor Response Spectrum (FRS), which covers all floor response spectra at all supporting points. The piping response estimated by enveloped FRS is conservative in most cases compared with the actual seismic response by multiple excitations. To perform rational seismic design and evaluation, it is important to investigate the seismic response by multiple excitations and to verify the validity of the analytical method by multiple excitation test. This paper reports the validation results of the multiple-excitation analysis of piping compared with the results of the multiple excitations shaking test using triple uni-axial shaking table and a 3-dimensional piping model (89.1mm diameter and 5.5mm thickness). Three directional moments from the analysis and the shaking test were compared on the validation. As the result, it is confirmed that the analysis by multiple time history excitation corresponds with the test result.

scholarly journals Dynamic Characteristics and Seismic Response Analysis of Self-Anchored Suspension Bridge

2012 ◽  
Vol 5 ◽  
pp. 183-188
Author(s):  
Lian Zhen Zhang ◽  
Tian Liang Chen
Keyword(s):  
Seismic Response ◽  
Seismic Design ◽  
Dynamic Characteristics ◽  
Response Spectrum ◽  
Time History ◽  
Suspension Bridge ◽  
Bridge Engineering ◽  
Response Analysis ◽  
Seismic Response Analysis ◽  
Seismic Design Code

Self-anchored suspension bridge is widely used in Chinese City bridge engineering for the past few years. Because the anchorage system of main cable has been changed from anchorage blocks to the ends of the girder, its’ dynamic mechanics behavior is greatly distinguished with the traditional earth anchored suspension bridge. This paper studies the dynamic characteristics and seismic response of one large-span self-anchored suspension bridge which is located in China/Shenyang city. Using a spatial dynamic analysis finite element mode, the dynamic characteristics are calculated out. An artificial seismic wave is adopted as the ground motion input which is fitted with acceleration response spectrum according to the Chinese bridge anti-seismic design code. Time-integration method is used to get the seismic time-history response. Geometry nonlinear effect is considered during the time-history analysis. At last, the dynamic characteristics and the behavior of earthquake response of this type bridge structure are discussed clearly. The research results can be used as the reference of seismic response analysis and anti-seismic design for the same type of bridge.

Sign in / Sign up

Export Citation Format

Share Document