Research of Cladded Layers Structures Changes Created by Laser Beam Technology Using a Wire Filler Material

2013 ◽  
Vol 442 ◽  
pp. 9-12
Author(s):  
Beáta Šimeková ◽  
Ingrid Kovaříková ◽  
Erika Hodúlová
Keyword(s):  
Wear Resistance ◽  
Laser Beam ◽  
Abrasive Wear ◽  
Laser Cladding ◽  
Tool Steel ◽  
Abrasive Wear Resistance ◽  
Basic Material ◽  
Filler Materials ◽  
Is Research ◽  
Wire Filler

The paper is focused on study of cladded layer properties created by laser beam, to abrasive wear resistant. As a basic material was used alloyed tool steel X37CrMoV5, the layers wascreated by laser beam by using a filler materials in the form of wire PZ 6159 and PZ 6168. The aim is research ofcladded layers structures changes, theirmicrohardness changes relative to the basic material and determine the abrasive wear resistance. One of the most important advantages of laser cladding technology is bringing the wire to the exact place of the interaction of a laser beam.

BÖHLER K100

Alloy Digest ◽  
2020 ◽  
Vol 69 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Cold Work Tool Steel

Abstract Böhler K100 is a high-carbon, high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and machining. Filing Code: TS-788. Producer or source: voestalpine Böhler Edelstahl GmbH & Co.

SANDVIK APM 2730

Alloy Digest ◽  
2019 ◽  
Vol 68 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2730 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-763. Producer or source: Sandvik Steel Company.

Research of Laser Clad Properties with Globular WC in Abrasive Wear Resistance

2013 ◽  
Vol 309 ◽  
pp. 121-125
Author(s):  
Ingrid Kovaříková ◽  
Frantisek Kolenic ◽  
Erika Hodúlová
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Laser Cladding ◽  
Abrasive Wear Resistance ◽  
Metal Powders ◽  
Specific System

Laser cladding technology is creating layers with higher wear resistance in compared to conventional technologies of creating surfaces. The aim of this paper was the study of the composite clad properties of globular deposits WC. Required characteristics of certain surfaces can be achieved by a combination of more materials and coatings. Various metal powders can be applied alternately on surface and so to create a specific system layers.

TLS VERTEX

Alloy Digest ◽  
2006 ◽  
Vol 55 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Chromium Carbides

Abstract TLS Vertex is a versatile air-hardening tool steel that is high in chromium and therefore rich in chromium carbides for abrasive wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-632. Producer or source: Timken Latrobe Steel.

SANDVIK APM 2723

Alloy Digest ◽  
2019 ◽  
Vol 68 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2723 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating. Filing Code: TS-758. Producer or source: Sandvik Steel Company.

INDUSTEEL D2

Alloy Digest ◽  
2020 ◽  
Vol 69 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Hardenability ◽  
High Chromium ◽  
Cold Work Tool Steel ◽  
D3 Tool Steel

Abstract Industeel D2 is an air-hardening, high-carbon (1.5%), high-chromium (12%), alloy cold-work tool steel that also contains molybdenum and vanadium. It is specifically designed to provide high abrasive wear resistance and high hardenability. This grade can be used for cutting and deformation tools submitted to high abrasive wear. It can be used when Type D3 tool steel shows an excessive sensitivity to cracking or chipping. This datasheet provides information on composition, physical properties, hardness, and elasticity. Filing Code: TS-791. Producer or source: Industeel France (a subsidiary of ArcelorMittal.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2080

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2080 is a high-carbon (2%), high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-792. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

Sign in / Sign up

Export Citation Format

Share Document